On Cubic Blaschke Products
Alastair N. Fletcher, Alexandra Hill · 2025
Read On Cubic Blaschke Products by Alastair N. Fletcher, Alexandra Hill (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-13484.txt.
Introduction
Alastair N. Fletcher and Alexandra Hill prove a sharp structure result for cubic Blaschke products, maps of the unit disk built from three basic factors. They show every such product has exactly one hyperbolic inflection point inside the disk. More than that, the point sits at the hyperbolic midpoint between the product's two critical points.
That rigid geometry yields an explicit formula in the map's parameters. The formula decides whether a given cubic product acts in elliptic, parabolic, or hyperbolic fashion. Readers get both a clean picture of where bending changes and a practical test they can apply to any cubic case.
Catalog record
| CREATOR | Alastair N. Fletcher, Alexandra Hill |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 50 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-13484
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
On Cubic Blaschke Products Alastair N. Fletcher, Alexandra Hill Abstract . We show that every cubic Blaschke product has a unique hyperbolic inflection point in the unit disk and, moreover, this point lies at the hyperbolic midpoint of the two critical points. Using this structure result for cubic Blaschke products, we give an explicit expression in terms of the parameters which determines when cubic Blaschke products are elliptic, parabolic, or hyperbolic. 1. Introduction 1.1. Background Complex dynamics is the study of the iteration of holomorphic or meromorphic functions. This is a very well-developed theory, see for example [ 2 , 4 , 9 ] . The Fatou set is the set of stable behaviour of the iterates, while the Julia set is the set of chaotic behaviour. The proper holomorphic self-maps of \mathbb{C} are none other than polynomials. In this setting, the orbits of critical points play a key role. If all of the orbits of the critical points remain bounded under iteration, then the Julia set is connected, whereas if all of the orbits of the critical points are unbounded, then the Julia set is a Cantor set. If we consider unicritical polynomials, that is, those polynomials with one critical point, then the dynamical behaviour is encoded by what happens to this critical point. Every unicritical polynomial is linearly conjugate to one of the form z^{d}+c . As conjugation does not change anything essential about the dynamics, we are thus led to the Multibrot set which, for d\geq 2 , is defined by \mathcal{M}_{d}=\left\{c\in\mathbb{C}:J(z^{d}+c)\text{ is connected}\right\}. When d=2 , there is only one critical point and so the dynamics of quadratic polynomials is encoded by the Mandelbrot set. However, once d\geq 3 , we can have different critical orbits that escape and remain bounded. Then classifying dynamical behaviour is more complicated. In this paper, we will investigate this circle of ideas for proper holomorphic self-maps of the disk \mathbb{D} . Such maps are finite Blaschke products, that is, maps of the form (1.1) B(z)=\mu\prod_{i=1}^{d}\left(\frac{z-w_{i}}{1-\overline{w_{i}}z}\right), for d\geq 1 , |\mu|=1 , w_{i}\in\mathbb{D} for i=1,\ldots,d and z\in\mathbb{D} . The Blaschke product is called non-trivial if d\geq 2 (and otherwise it is a Möbius automorphism of \mathbb{D} ). It is fairly immediate that the Julia set of a Blaschke product must be contained in \partial\mathbb{D} . It turns out that there are two possibilities: either J(B)=\partial\mathbb{D} or it is a Cantor subset of \partial\mathbb{D} . The reason that the dynamical possibilities are simpler for Blaschke products is the Denjoy-Wolff Theorem. As a consequence of this result, every orbit in \mathbb{D} of a non-trivial Blaschke product must converge to a point w_{0}\in\overline{\mathbb{D}} . This special point is called the Denjoy-Wolff point of B and leads to a classification of Blaschke products. The Blaschke product B is called: (a) elliptic if w_{0}\in\mathbb{D} , (b) parabolic if w_{0}\in\partial\mathbb{D} and B^{\prime}(w_{0})=1 , (c) hyperbolic if w_{0}\in\partial\mathbb{D} and 0<B^{\prime}(w_{0})<1 . The dynamics of unicritical Blaschke products were studied in [ 6 , 5 ] . There it was shown that if B is a unicritical Blaschke product, then it is Möbius conjugate to a unique Blaschke product of the form B_{w,d}(z)=\left(\frac{z-w}{1-\overline{w}z}\right)^{d}. The parameter space for degree d Blaschke products can therefore be identified with \mathbb{D} . The analogous set to the Mandelbrot set in this setting is the connectedness locus \mathcal{C}_{d}=\left\{w\in\mathbb{D}:J(B_{w,d})\text{ is connected}\right\}. It is well-known that the Julia set of a Blaschke product is connected if and only if B is either elliptic or parabolic with B^{\prime\prime}(w_{0})=1 . It was shown in [ 5 , 6 ] that the parabolic parameters for a degree d Blaschke product form an epicycloid with d-1 cusps. The elliptic parameters lie inside this epicycloid and the hyperbolic parameters lie outside. See Figure 1 for the degree 3 case. Then \mathcal{C}_{d} is the bounded component of the complement of the epicycloid together with the cusps of the epicycloid. In particular, \mathcal{C}_{d} is neither open nor closed. Figure 1. The parameter space for unicritical degree 3 Blaschke products. The nephroid curve corresponds to the parabolic parameters. Comparing with the Multibrot set, the Blaschke situation is simpler. The Multibrot set contains an epicycloid whose interior corresponds to the case where the polynomial z^{d}+c has an attracting fixed point. See Figure 2 for the degree 3 case. This feature persists to the Blaschke product setting, but all of the other complicated fractal behaviour goes away, essentially because a Blaschke product cannot have periodic attracting cycles that are not fixed. Figure 2. The parameter space for unicritical degree 3 polynomials. Observe the nephroid appears here too. 1.2. Statement of Results The aim of this paper is to establish a dynamical classification for all degree 3 Blaschke products. From now on, we call such Blaschke products cubic. First, we establish a normal form for cubic Blaschke products that corresponds to the form z^{3}+az+b for cubic polynomials. Denote by \mathcal{A}(\mathbb{D}) the set of a Möbius automorphisms of \mathbb{D} . Proposition 1.1 . (a) Every cubic Blaschke product is conjugate by an element of \mathcal{A}(\mathbb{D}) to a Blaschke product of the form B(z)=\mu\left(\frac{z^{3}-s_{0}^{2}r_{0}z^{2}-s_{0}^{2}z+r_{0}}{\overline{r_{0}}z^{3}-s_{0}^{2}z^{2}-s_{0}^{2}\overline{r_{0}}z+1}\right), where s_{0}\in[0,1) , r_{0}\in\mathbb{D} , and |\mu|=1 . (b) Every cubic Blaschke product is conjugate by an element of \mathcal{A}(\mathbb{D}) to a Blaschke product of the form (1.2) B(z)=\frac{z^{3}-srz^{2}-\overline{s}z+r}{\overline{r}z^{3}-sz^{2}-\overline{sr}z+1}, where r,s\in\mathbb{D} . The form of ( 1.2 ) is unique up to identifying r with -r . We have stated Proposition 1.1 in this way as part (a) may be found in an unpublished note of Singer [ 11 ] that we wish to give due credit to. Part (b) follows quickly from part (a) and shows that we may identify parameter space for cubic Blaschke products with \mathbb{D}^{2} . Our first main result is a type of structure theorem for cubic Blaschke products. The motivation for this result arises from [ 5 , Theorem 3.1] where it was shown for a degree 2 Blaschke product that the unique critical point lies at the hyperbolic midpoint of the two zeros of B . One may hope that for cubic Blaschke products there may be a similar result involving solutions of B^{\prime\prime}(z)=0 , as there are precisely two critical points. However, it is far from clear how many solutions of this equation a cubic Blaschke product can have in the disk. Further issues arise due to the fact that the set of Blaschke products is not closed under differentiation, and that higher derivatives of Blaschke products may not behave in a conformally invariant way. Instead of using derivatives, we will use hyperbolic derivatives H^{n}B as defined by Rivard [ 10 ] . We will recall these in more detail in Section 2.4 , but note here that critical points of a Blaschke product B are precisely the solutions of (H^{1}B)(z)=0 , and we will call solutions of (H^{2}B)(z)=0 hyperbolic inflection points . We will see that hyperbolic inflection points will typically not be solutions of B^{\prime\prime}(z)=0 . Theorem 1.2 . Let B be a cubic Blaschke product. Then B has precisely one hyperbolic inflection point in \mathbb{D} and, moreover, it lies at the hyperbolic midpoint of the two critical points of B . The point about the normal forms from Proposition 1.1 is then revealed by