Orientation-Free Neural Network-Based Bias Estimation for Low-Cost Stationary Accelerometers

Michal Levin, Itzik Klein · 2025

Read Orientation-Free Neural Network-Based Bias Estimation for Low-Cost Stationary Accelerometers by Michal Levin, Itzik Klein (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-13071.txt.

Introduction

Michal Levin and Itzik Klein calibrate cheap accelerometers without leveling them. Low-cost motion sensors in phones, robots, and navigation gear suffer bias errors, and standard calibration needs the sensor held level or rotated through known orientations, which is slow in the field. Their learning-based method estimates the bias while the device sits still, with no knowledge of its orientation and no rotation steps at all. A neural network learns the correction directly from stationary data.

Validation used a dataset of over thirteen hours recorded from six accelerometers. The method's errors came out more than half lower than traditional techniques, consistently across the devices. The authors present it as a fast, practical, scalable fix for rapid field deployment. Better bias estimates mean more reliable position and motion sensing from inexpensive hardware, which matters for the many scientific and industrial settings that cannot afford precision instruments or careful bench calibration.

Catalog record

CREATORMichal Levin, Itzik Klein
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-13071

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Orientation-Free Neural Network-Based Bias Estimation for Low-Cost Stationary Accelerometers Michal Levin, Itzik Klein Abstract Abstract Low-cost micro-electromechanical accelerometers are widely used in navigation, robotics, and consumer devices for motion sensing and position estimation. However, their performance is often degraded by bias errors. To eliminate deterministic bias terms a calibration procedure is applied under stationary conditions. It requires accelerometer leveling or complex orientation-dependent calibration procedures. To overcome those requirements, in this paper we present a model-free learning-based calibration method that estimates accelerometer bias under stationary conditions, without requiring knowledge of the sensor orientation and without the need to rotate the sensors. The proposed approach provides a fast, practical, and scalable solution suitable for rapid field deployment. Experimental validation on a 13.39-hour dataset collected from six accelerometers shows that the proposed method consistently achieves error levels more than 52% lower than traditional techniques. On a broader scale, this work contributes to the advancement of accurate calibration methods in orientation-free scenarios. As a consequence, it improves the reliability of low-cost inertial sensors in diverse scientific and industrial applications and eliminates the need for leveled calibration. Introduction Micro-electro-mechanical system (MEMS) accelerometers are widely used in navigation, robotics, motion tracking, virtual reality, biomedical, and healthcare applications due to their small size, low power consumption, and affordability [ 11 ; 3 ; 20 ] . These sensors, typically configured as triaxial devices, measure specific force by detecting the movement of an internal mass within a microscopic mechanical structure [ 36 ; 15 ] . MEMS accelerometers are fabricated using micro-machining techniques on silicon wafers, a process that enables their compact size, low cost, and low power consumption [ 1 ; 30 ] . This miniaturization drastically reduces cost and power consumption but increases fabrication imperfections, temperature sensitivity, and stochastic noise [ 20 ] . As a result, low-cost accelerometers exhibit higher errors compared to their high-grade counterparts [ 36 ; 24 ] . Within the MEMS sensor category, performance can vary depending on design precision and manufacturing quality. Industrial and tactical-grade MEMS sensors often include built-in calibration and stability enhancements, while low-cost units prioritize miniaturization and affordability at the expense of long-term accuracy. If not properly corrected, small measurement errors, especially in low-cost sensors, accumulate during this integration process, leading to significant drift in motion tracking and the estimated navigation solution. Loosely speaking, in the later, the accelerometer output is integrated once to derive velocity and twice to derive position. Consequently, any additive error in the signal is also integrated, producing a linearly growing error in velocity and a quadratically growing position drift [ 13 ; 32 ] . To remove these deterministic error components, a calibration procedure is performed prior to mission start. This step is essential to ensure reliable performance, particularly for low-cost MEMS-based accelerometers. In most applications, the bias is the most dominant and persistent source of error and must be accurately estimated for reliable navigation [ 19 ] . Existing calibration approaches suffer from significant practical limitations. Many require external calibration equipment, knowledge of sensor orientation, or extended multi-position recording sessions [ 39 ; 37 ; 7 ] . These methods depend on predefined models with numerous parameters and are not easily scalable or adaptable to various real-world conditions [ 12 ] . Furthermore, they lack robustness to hardware variability and cannot operate under minimal constraints, which is often required in field deployments [ 5 ; 21 ] . Recent advances in learning-based inertial sensor and fusion have demonstrated that deep neural networks can capture complex, nonlinear error patterns directly from raw sensor data without relying on predefined physical models [ 9 ; 8 ] . In particular, these methods have demonstrated superior performance in gyroscope stationary calibration [ 14 ; 35 ] . Inspired by these recent advances and to overcome the practical limitations of existing accelerometer calibration approaches, we offer a learning-based method that replaces analytical modelling in regressing the accelerometer bias in practical real-world scenarios where the orientation is unknown. To this end, we propose OFBENet, an end-to-end orientation-free neural network designed to regress accelerometer biases directly from raw stationary data. The key contributions of this paper are: 1. A model-free accelerometer calibration approach for practical real-world scenarios with unknown sensor orientation and without the need for rotating the sensor to different positions. 2. Development of OFBENet, an end-to-end orientation-free neural network for accelerometer bias estimation. OFBENet includes a simple yet efficient neural network that learns directly from raw time-series data, capturing nonlinear error patterns without prior knowledge of sensor orientation. 3. A GitHub repository containing our dataset and the code for implementing the OFBENet architecture. The repository serves as a comprehensive resource for researchers and practitioners interested in replicating or extending the proposed approach and to foster research in the field. To evaluate the proposed approach data from multiple accelerometers, placed in different orientation, were was collected and totalling 13.39 hours of recordings under varied conditions. We demonstrate that our proposed approach outperforms two leading model-based calibration methods with higher accuracy and stable performance across devices. By eliminating the need for external equipment, predefined orientations, or long recordings, OFBENet provides a lightweight and scalable alternative to traditional calibration workflows. The method enables fast and accurate bias estimation using only stationary signals. This makes it suitable for a wide range of real-world applications, including robotics, navigation systems, and field deployments where rapid initialization is essential. The rest of this paper is organized as follows: Section II describes the model-based calibration approachs. Section III presents the proposed approach and Section IV provides our analysis and results. Finally, Section V concludes this study. Background Accelerometer Error Model Accelerometers are subject to various error sources that affect measurement accuracy. A comprehensive accelerometer error model is typically expressed as [ 4 ] : \begin{bmatrix}\tilde{f}_{x}\\ \tilde{f}_{y}\\ \tilde{f}_{z}\end{bmatrix}=\begin{bmatrix}b_{x}\\ b_{y}\\ b_{z}\end{bmatrix}+\begin{bmatrix}k_{11}&k_{12}&k_{13}\\ k_{21}&k_{22}&k_{23}\\ k_{31}&k_{32}&k_{33}\end{bmatrix}\cdot\begin{bmatrix}f_{true,x}\\ f_{true,y}\\ f_{true,z}\end{bmatrix}+\begin{bmatrix}n_{x}\\ n_{y}\\ n_{z}\end{bmatrix} (1) where \tilde{f}_{i} denotes the accelerometer output component along axis i , f_{\text{true},i} is the true specific force acting on the sensor, b_{i} represents the bias component, and n_{i} is the zero-mean measurement noise, with i\in\{x,y,z\} corresponding to the three orthogonal axes of the accelerometer. The elements k_{ij} form the 3×3 scale and misalignment matrix, where diagonal terms represent scale factor errors and off-diagonal terms account for axis misalignment. Among these error sources in stationary conditions, bias is typically the most dominant component and is present as a constant offset in all accelerometers during a single operation period, though it varies between power cycles [ 36 ; 19 ] . Stationary Readings Accelerometer measurements are expressed in the sensor’s body coordinate frame, whereas the gravitational acceleration vector is defined in the navigation frame. To relate the two, a transformation matrix is employed. Using Euler angles, it is defined as [ 19 ] : \mathbf{T}^{n}_{b}=\begin{aligned} \begin{bmatrix}c_{\theta}c_{\psi}&c_{\theta}s_{\psi}&-s_{\theta}\\ -c_{\phi}s_{\psi}+s_{\phi}s_{\theta}c_{\psi}&c_{\phi}c_{\psi}+s_{\phi}s_{\theta}s_{\psi}&s_{\phi}c_{\theta}\\ s_{\phi}s_{\psi}+c_{\phi}s_{\theta}c_{\psi}&-s_{\phi}c_{\psi}+c_{\phi}s_{\theta}s_{\psi}&c_{\phi}c_{\theta}\end{bmatrix}\end{aligned} (2) where T^{n}_{b} is the transformation matrix from the navigation frame (n) to the body frame (b), and \phi , \theta , and \psi represent the roll, pitch, and yaw Euler angles, respectively. These rotations are applied sequentially: first, the yaw ( \psi ) rotation around the z -axis, then the pitch ( \theta ) rotation around the y -axis, and finally the roll ( \phi ) rotation around the x -axis.

Read the complete text