From One to Two Dimensions: Magnetic Phases in Weakly Coupled Spin Ladders
Mateo Cárdenes Wuttig, Andrew J. Millis · 2025
Read From One to Two Dimensions: Magnetic Phases in Weakly Coupled Spin Ladders by Mateo Cárdenes Wuttig, Andrew J. Millis (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-10503.txt.
Introduction
Mateo Cárdenes Wuttig and Andrew J. Millis map out the magnetism of spin ladders, materials whose atoms form two-legged ladder structures that behave almost like one-dimensional chains. Many real materials fit this description, and the open question is what happens when ladders are weakly coupled sideways into a second dimension.
Using the Density Matrix Renormalization Group method together with a self-consistent mean-field approximation, they chart the full ground-state phase diagram. Depending on the couplings and magnetic field, the system can be spin-gapped, antiferromagnetic, ferrimagnetic, or fully polarized. They also show that measuring how magnetization responds to an applied field can place a real material on the diagram and pin down its Hamiltonian parameters, giving experimentalists a practical identification route.
Catalog record
| CREATOR | Mateo Cárdenes Wuttig, Andrew J. Millis |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 69 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-10503
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
From One to Two Dimensions: Magnetic Phases in Weakly Coupled Spin Ladders Mateo Cárdenes Wuttig, Andrew J. Millis Abstract A large variety of materials can be approximately described by means of spin-1/2 Heisenberg ladders. Here, the Density Matrix Renormalization Group (DMRG) algorithm together with a previously established numerical self-consistent mean-field approximation is used to investigate the magnetic properties of spin ladders coupled in a second dimension. The full ground state phase diagram including spin-gapped, antiferromagnetic, ferrimagnetic and fully polarized phases is presented as a function of interladder and intraladder coupling and magnetic field. Measurement of the dependence of magnetization on applied magnetic field is shown to enable location of a material on the phase diagram and determination of the Hamiltonian parameters. These results provide a practical route toward identifying and characterizing magnetic materials composed of coupled spin ladders. I Introduction A spin ladder (see fig. 1 a) is a one-dimensional system consisting of two chains ( j=1,2 in fig. 1 a) with an interaction J_{\parallel} coupling spins along the chains and also a ’rung’ ( J_{\perp} ) interaction coupling adjacent spins in different chains. If each site hosts a spin 1/2 and the interactions are antiferromagnetic and SU(2) symmetric (Heisenberg), the ground state has no long-ranged order, has a gap to spin excitations, and may be viewed as a quantum superposition of singlet pairs. Spin ladders are conceptually interesting as examples of spin liquid states. It has been theoretically proposed 15 ; 8 that adding mobile carriers to a spin ladder will produce strong superconducting correlations persisting to high temperature. Many materials, including some copper-oxide perovskite-derived compounds 12 ; 18 ; 11 , and molecular materials 24 ; 22 ; 17 ; 27 ; 23 , can be approximately described as coupled spin-1/2 Heisenberg ladders, and an intriguing possibility is that doping these compounds may lead to novel superconductivity. However, in all of these cases the question of deviations from one-dimensionality is an important issue. The development of experimental protocols for determining if a given material may be viewed in terms of weakly coupled spin ladders and is therefore likely to become superconducting on doping is of interest. The magnetic properties and excitation spectrum of a single spin ladder are well understood 7 ; 16 ; 25 . An important step towards understanding the effects of interladder coupling was taken by Giamarchi and collaborators 13 ; 4 . Motivated by measurements on the organic compound bis(piperidinium)tetrabromocuprate(II) (BPCB), Giamarchi et al. introduced a formalism combining a numerically exact treatment of the properties of a single ladder with a mean field treatment of the interladder coupling. Building on this work, we present a comprehensive treatment of the interladder coupling between adjacent spin ladders for small and large intraladder couplings and including two different coupling geometries relevant to different materials of current experimental interest. We use the Density Matrix Renormalization Group (DMRG) algorithm in the Matrix Product State (MPS) formulation as the numerically exact treatment of a single ladder. We investigate both a system where all rungs are coupled, similar to BPCB 17 ; 4 , and one where only every second rung is coupled, which is realized, for example, in terphenyl 23 . Because in many cases measurements of magnetization ( M ) as a function of applied field ( H ) are feasible whereas direct probes of spin correlations and antiferromagnetic ordering are not, we focus on obtaining and interpreting results for M(H) . Our work is structured as follows. In section II , we introduce the Hamiltonian of coupled spin ladders and explain the different magnetic phases. In section III , we present the zero-temperature phase diagram as a function of magnetic field and coupling strength between ladders. Next, we present magnetization data for different interladder and intraladder couplings and show how the critical fields, midpoint magnetization, and the slope of M(H) can be used to determine the system parameters. We determine the critical interladder coupling to induce staggered order at zero field and explain how the quantitative phase diagram depends on coupling parameters. II Model and Methods II.1 Hamiltonian In this work, we study a system of parallel spin ladders, with nearest neighbor ladders coupled by a Heisenberg interaction. An isolated ladder, depicted in fig. 1 (a), is a one-dimensional system with a unit cell containing two sites, each holding a S=1/2 local moment described by the three conventional Heisenberg spin operators \vec{S} coupled by a Hamiltonian H_{\text{spin ladder}}=H_{\perp}+H_{\parallel}+H_{\text{mag}} (1) comprising a rung Hamiltonian H_{\perp}=J_{\perp}\sum_{i=1}^{L}\vec{S}_{i,1}\cdot\vec{S}_{i,2}\,, (2) a chain Hamiltonian is H_{\parallel}=\gamma J_{\perp}\sum_{i=1}^{L}\sum_{j=1}^{2}\vec{S}_{i,j}\cdot\vec{S}_{i+1,j}\,, (3) and a coupling to a uniform external magnetic field H_{\text{mag}}=-h^{z}J_{\perp}\sum_{i=1}^{L}\sum_{j=1}^{2}S^{z}_{i,j}\,. (4) A ladder of length L thus has 2L sites denoted as (i,j) , where i=1,...,L is the position on each of the two legs j=1,2 . We choose to measure energies in units of J_{\perp} and have defined the dimensionless intraladder coupling \gamma=J_{\parallel}/J_{\perp} and the dimensionless magnetic field strength h_{z} . The Hamiltonian of m parallel spin ladders coupled in the second dimension is H_{m\,\text{spin ladders}}=\sum_{k=1}^{m}H_{\text{spin ladder},k}+H^{\prime} (5) We consider two different geometries for interladder coupling: One, motivated by the BPCB compound, in which every site in one ladder is coupled to one site in another ladder, and one, motivated by the recently synthesized terphenyl compound 23 , in which only every other rung is coupled in the second dimension. The Hamiltonian for BPCB 17 and related materials, see fig. 1 (b), is: H^{\prime}=J^{\prime}J_{\perp}\sum_{k=1}^{m-1}\sum_{i=1}^{L}\vec{S}_{i,2,k}\cdot\vec{S}_{i,1,k+1}\,, (6) where we have defined a dimensionless interladder coupling J^{\prime} and k=1,...,m labeling the rungs of different ladders. The Hamiltonian for terphenyl 23 , see fig. 1 (c), is H^{\prime}_{\text{terphenyl}}=J^{\prime}J_{\perp}\sum_{k=1}^{m-1}\sum_{i=2,4,...}\vec{S}_{i,2,k}\cdot\vec{S}_{i,1,k+1}\,. (7) The absence of some of the interladder couplings in terphenyl leads to features that will be discussed below. We note that in real materials, there will also be an interplane coupling J_{=} connecting two-dimensional layers of coupled spin ladders. Usually, J_{=} is much smaller than all other energy scales, so it is irrelevant to the ground state properties we investigate in this work and is not considered here. Fig. 1: Depiction of spin ladder models. (a) Single spin ladder of length L with coupling J_{\perp} on rungs i and J_{\parallel} on legs j . (b) Coupled spin ladders with interladder coupling J^{\prime} are effectively a two-dimensional system with J_{\parallel} along x -direction and alternating J_{\perp} and J^{\prime} in y -direction. Each ladder k is visualized by a red box. (c) Alternating interladder coupling J^{\prime} between two ladders k=1,2 on every second rung. II.2 Phases and Observables We introduce two important observables for a single spin ladder: the uniform (m^{z}) and staggered (m^{x}_{a}) magnetization, defined as m^{z}=\frac{1}{2L}\sum_{i=1}^{L}\sum_{j=1}^{2}S^{z}_{i,j} (8) and m^{x}_{a}=\frac{1}{2L}\sum_{i=1}^{L}\sum_{j=1}^{2}(-1)^{i+j}S^{x}_{i,j}\,, (9) respectively. The model of coupled ladders may be viewed as a square-lattice Heisenberg model with different couplings along different bonds. Depending on the relative values of the parameters, we may expect antiferromagnetically ordered phases ( m^{x}_{a}\neq 0 ), spin-gapped phases ( m^{z}=m^{x}_{a}=0 ) and, for sufficiently large magnetic fields, a fully spin-polarized phase ( m^{z}=1/2;\penalty\ m^{x}_{a}=0 ). At J^{\prime}=0 we have a decoupled set of spin ladders. Except at \gamma=\infty 1 , an isolated ladder at zero field ( h=0 ) has a ground state with exponentially decaying correlations and a gap \Delta to spin excitations. For all \gamma ,