Optomechanical Cooling without Residual Heating

Surangana Sengupta, Björn Kubala, Joachim Ankerhold, Ciprian Padurariu · 2025

Read Optomechanical Cooling without Residual Heating by Surangana Sengupta, Björn Kubala, Joachim Ankerhold, Ciprian Padurariu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-10318.txt.

Introduction

Surangana Sengupta, Björn Kubala, Joachim Ankerhold, and Ciprian Padurariu lift a hard floor that has capped the cooling of tiny moving parts coupled to light. The standard sideband method cools such parts toward the quantum ground state, but backaction heat sets a lowest phonon count that no drive strength can beat. The team widens the standard semi-classical model to cover cavity systems with both passive and active nonlinear parts.

Their test case is a circuit system whose active drive comes from a Josephson junction. In that setup, they show, the leftover backaction heat can be wiped out in full, a result that beats schemes based on passive parts alone. Beating the floor would open a new level of quantum control over small moving systems, and the team argues the method can be built in the lab.

Catalog record

CREATORSurangana Sengupta, Björn Kubala, Joachim Ankerhold, Ciprian Padurariu
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-10318

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Optomechanical Cooling without Residual Heating Surangana Sengupta, Björn Kubala, Joachim Ankerhold, Ciprian Padurariu Abstract Resolved-sideband cooling is a standard technique in cavity optomechanics enabling quantum control of mechanical motion, but its performance is ultimately limited by quantum backaction heating. This fundamental effect imposes a limit on the minimum achievable mechanical phonon number, establishing a finite-temperature floor regardless of the applied cooling strength. We generalize the semi-classical model for optomechanical cooling to describe universal cavity Hamiltonians incorporating both passive and active nonlinearities. As a concrete demonstration, we analyze the simplest circuit optomechanical system that implements a nonlinear drive via a Josephson junction. Our analysis reveals that this active nonlinear drive can eliminate the residual heating backaction, thereby comparing favorably with alternative optomechanical cooling schemes based on passive nonlinearities 42 . By successfully overcoming the finite-temperature floor that limits conventional schemes, our method paves the way for unprecedented quantum control over mechanical systems and establishes the experimental viability of zero-heating optomechanical cooling. Introduction — Optomechanical cooling is an important technology for high-precision experiments, enabling applications from building new mass sensors 27 ; 16 ; 26 , to probing fundamental quantum effects in massive mechanical objects 36 ; 2 ; 1 ; 11 ; 8 . The conventional cooling scheme combines a strongly-driven harmonic cavity mode and a mechanical element that modulates the cavity frequency 9 ; 23 . Photons at the drive frequency scatter inelastically, exchanging energy with the mechanical mode, which results in the anti-Stokes sideband in the emission spectrum and reduces the mechanical phonon occupation 22 ; 29 ; 39 ; 30 ; 32 ; 29 ; 39 . The theoretical description is well understood and, at weak optomechanical coupling, a semi-classical approach accurately captures the physics by directly relating the optomechanical damping to the cavity’s shot noise spectrum 29 ; 13 . Despite its successes, the conventional method is fundamentally limited by the unwanted backaction of the cavity on the mechanical mode 7 . This backaction manifests as a residual heating effect that sets a non-zero floor for the lowest phonon occupation achievable via optomechanical cooling. While this residual heating can be minimized by increasing the cavity drive detuning 29 , maintaining the required cavity occupation at high detuning demands a correspondingly increased driving power 38 ; 10 . In current experiments, this driving power is ultimately constrained either by fundamental experimental limitations or, more commonly, by the intrinsic anharmonic behavior of the cavity mode. In this Letter, we re-examine the minimum phonon number floor by analyzing the effects of an active nonlinearity, a capability realized by extending the semi-classical theory 29 to describe cavities under arbitrary Hamiltonian control. Utilizing this general framework, we theoretically demonstrate that driving the cavity with a specific tunable, active nonlinearity can completely eliminate the unwanted backaction effects. This suppression is due to squeezing generated within the cavity, allowing us to identify optimal cooling regimes and derive the exact conditions for zero residual heating. Our nonlinear scheme establishes the feasibility of cooling to phonon occupation orders of magnitude below unity, and it complements and generalizes prior work using squeezed light injected into 6 ; 12 ; 41 or generated within 21 ; 17 ; 25 ; 5 ; 40 ; 41 the cavity, and recent investigations into passive Kerr nonlinearities 42 ; 24 ; 33 ; 15 ; 14 . Model — We consider a generic optomechanical system where the mechanical degree of freedom y modulates the cavity’s resonance frequency \omega_{c}(y) . The driven cavity dynamics is governed by an arbitrary time-dependent Hamiltonian \hat{H}_{\text{cav}}(t) . This formulation naturally incorporates both active (e.g., a nonlinear drive with frequency \omega_{d} ) and passive nonlinearities (e.g., a Kerr term 42 ). Applying the rotating wave approximation (RWA), as is usual 7 , yields the time-independent cavity Hamiltonian \hat{H}_{\text{cav}}^{\text{RWA}} , so that the total optomechanical Hamiltonian is \hat{H}_{\text{RWA}}=\hat{H}_{\text{cav}}^{\text{RWA}}+\hat{H}_{m}+\hat{H}_{\text{int}} . The mechanical mode with frequency \omega_{m} is governed by \hat{H}_{m}=\hbar\omega_{m}(\hat{b}^{\dagger}\hat{b}+\frac{1}{2}) and the optomechanical interaction follows as \hat{H}_{\text{int}}=\hbar G\hat{y}\hat{a}^{\dagger}\hat{a} , obtained by linearizing \omega_{c} 23 ; 7 with respect to the displacement \hat{y}=y_{\text{zpf}}\left(\hat{b}^{\dagger}+\hat{b}\right) . Here, G=\partial\omega_{c}/\partial y is the single-photon optomechanical coupling, and \hat{a}^{\dagger} is the cavity photon creation operator. Including dissipation via input-output theory 18 , we arrive at the quantum Langevin equations, \displaystyle\frac{d}{dt}{\hat{a}}={} \displaystyle\frac{i}{\hbar}\left[\hat{H}^{\text{RWA}}_{\text{cav}},\hat{a}\right]-\left(iG\hat{y}+\frac{\gamma}{2}\right)\hat{a}+\sqrt{\gamma}\hat{a}_{\text{in}} (1) \displaystyle\frac{d}{dt}{\hat{b}}={} \displaystyle\left(-i\omega_{m}-\frac{\gamma_{m}}{2}\right)\hat{b}-iGy_{\text{zpf}}\hat{a}^{\dagger}\hat{a}+\sqrt{\gamma_{m}}\hat{b}_{\text{in}} (2) where \gamma is the cavity decay rate and \gamma_{m} is the damping of the mechanical mode. The operators \hat{a}_{\text{in}} and \hat{b}_{\text{in}} model thermal noise 18 . Under typical cryogenic conditions ( k_{B}T\ll\hbar\omega_{c} ), the cavity mode’s thermal occupation is negligible ( \bar{n}_{c}^{\text{T}}\simeq 0 ), while the mechanical mode remains highly occupied ( \bar{n}_{m}^{\text{T}}\gtrsim 10^{2}..10^{3} ) 38 ; 42 . Optomechanical damping rate: Preliminaries — We analyze the system under standard conditions: weak optomechanical coupling g_{0} ( g_{0}=Gy_{\text{zpf}}\ll\omega_{m},\gamma ) and high quality factors ( \omega_{c}/\gamma,\omega_{m}/\gamma_{m}\gg 1 , with \gamma\gg\gamma_{m} ). The central quantity governing mechanical cooling is the optomechanical damping rate, \Gamma_{\text{opt}} . To leading order in the coupling g_{0} , it is determined by the asymmetry of the photon number spectrum S_{\text{nn}}(\omega) around the mechanical frequency \omega_{m} 29 ; 13 : \displaystyle\Gamma_{\text{opt}}=g_{0}^{2}[S_{\text{nn}}(\omega_{m})-S_{\text{nn}}(-\omega_{m})], (3) with S_{\text{nn}}(\omega)=\int^{\infty}_{-\infty}dt\ e^{i\omega t}\tilde{S}_{nn}(t) obtained from the photon number autocorrelation function \tilde{S}_{\text{nn}}(t)=\langle\hat{a}^{\dagger}(t)\hat{a}(t)\hat{a}^{\dagger}(0)\hat{a}(0)\rangle-\langle\hat{a}^{\dagger}(t)\hat{a}(t)\rangle^{2} in the uncoupled limit ( g_{0}\to 0 ). Starting from Eq. 1 , our first objective is to obtain analytical expressions for these key quantities, while keeping the cavity Hamiltonian arbitrary. Since achieving large damping rates requires driving the cavity to a high average photon occupation, n=\braket{\hat{a}^{\dagger}\hat{a}}\gg 1 , we can naturally employ a semi-classical approximation, which enables us to find a simple expression for the photon number spectrum, as detailed in the rest of this section. We decompose the cavity operator as \hat{a}=\alpha_{0}+\delta\hat{a} , where \alpha_{0}=\braket{\hat{a}}=A_{0}e^{-i\theta_{0}} is the classical fixed point amplitude and \delta\hat{a} is the quantum fluctuations operator. The fixed point \alpha_{0} is the steady-state solution to the classical equation of motion \partial_{\alpha^{*}}{\cal H}=i\hbar\gamma\alpha/2 , where the classical Hamiltonian {\cal H}(\alpha,\alpha^{*}) is obtained from the normal-ordered \hat{H}_{\text{cav}}^{\text{RWA}} by replacing the operators \hat{a} ( \hat{a}^{\dagger} ) with \alpha ( \alpha^{*} ) 3 ; 4 (Appendix A). The key quantity \tilde{S}_{\text{nn}}(t) can then be expressed in terms of four elementary correlation functions, i.e. \displaystyle\tilde{S}_{\text{nn}}(t)=n\left[S_{1}(t)+S_{2}(t)+S_{3}(t)+S_{4}(t)\right]. (4) \displaystyle S_{1}(t)=e^{2i\theta_{0}}\braket{\delta\hat{a}(t)\delta\hat{a}(0)};\quad S_{2}(t)=\braket{\delta\hat{a}^{\dagger}(t)\delta\hat{a}(0)}; \displaystyle S_{4}(t)=e^{-2i\theta_{0}}\braket{\delta\hat{a}^{\dagger}(t)\delta\hat{a}^{\dagger}(0)};\quad S_{3}(t)=\braket{\delta\hat{a}(t)\delta\hat{a}^{\dagger}(0)}. Figure 1: (Color online.) Classical fixed points of the Josephson optomechanics circuit. (a) Sketch of the simplest circuit that implements a nonlinear drive. A dc-biased Josephson junction connects in series with a superconducting LC -circuit where the capacitance (or inductance) is modulated by a mechanical element. (b) Cavity photon number n as function of driving strength E_{J}^{*} for different detuning \Delta . The curves are symmetric for \pm\Delta . (c) Phase \theta_{0} as function of driving strength E_{J}^{*} for \Delta=0,\pm 0.4\gamma . Monostable solutions (black) bifurcate into bistable solutions ( \theta_{0}^{+} orange and \theta_{0}^{-} blue). In panels (c)-(e), blue and pink shading indicate the cooling and heating regimes. (d) Resonance curves n(\Delta) for E_{j}^{*}/\hbar\gamma= 100 (purple), 200 (light-blue), 300 (navy), 404.40 is E_{J,\Delta=0}^{\text{bif}}/\hbar\gamma (dark-red), 750 (blue/orange). (e) Classical fixed points in phase space, with E_{j}^{*} indicated by the color scale. Thick lines represent monostable solutions; thin lines show bistable solutions. Curves correspond to different detunings \Delta/\gamma (blue values). The blue arrow connects points (black) at E_{j}^{*}/\hbar\gamma=750 , corresponding to the blue curve in (d).

Read the complete text