Photon counting readout for detection and inference of gravitational waves from neutron star merger remnants
Ethan Payne, Lee McCuller, Katerina Chatziioannou · 2025
Read Photon counting readout for detection and inference of gravitational waves from neutron star merger remnants by Ethan Payne, Lee McCuller, Katerina Chatziioannou (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-09656.txt.
Introduction
Ethan Payne, Lee McCuller, and Katerina Chatziioannou propose counting individual photons to hear the faint ring of merged neutron stars. The postmerger signal carries dense-matter physics, but it stays rare and weak even for next-generation detectors. Above a kilohertz the data are dominated by quantum noise, which makes a photon-counting readout natural.
In that scheme, signals and noise arrive as discrete photon counts in a chosen mode basis. Simulations show roughly one in a hundred signals with very low signal-to-noise can still yield a single detecting photon. Accumulating tens of thousands of signals could double the precision on a neutron star's radius, they estimate. Reducing classical noise would tighten the constraints further.
Catalog record
| CREATOR | Ethan Payne, Lee McCuller, Katerina Chatziioannou |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 58 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-09656
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Photon counting readout for detection and inference of gravitational waves from neutron star merger remnants Ethan Payne, Lee McCuller, Katerina Chatziioannou Abstract Gravitational waves emitted after neutron star binary coalescences and the information they carry about dense matter are a high-priority target for next-generation detectors. Even though such detectors are expected to observe millions of signals, detectable post-merger emission will remain rare. In this work, we explore post-merger detectability and inference through an alternative detector readout scheme for data dominated by quantum-noise, which is the case above 1 1 kHz: photon-counting. In such a readout, signals and noise become quantized into discrete distributions corresponding to the detection of single photons measured in a chosen basis of modes. Through simulated data, we demonstrate that photon counting can be efficient even for weak signals. We find ∼ 1 {\sim}1 in 100 signals with a post-merger signal-to-noise ratio of 0.2 can result in a single photon and thus be detected. Furthermore, after 2 × 10 4 2\times 10^{4} signals — equivalent to 10 − 2 10^{-2} to 1.5 1.5 years of observation — photon counting results in a twofold improvement in the measurement of the radius of a 1.6 M ⊙ 1.6\,M_{\odot} neutron star. Constraints can be further tightened if the detector classical noise is reduced. Photon counting offers a promising alternative to traditional homodyne readout techniques for extracting information from low signal-to-noise ratio post-merger signals. I Introduction Future generations of gravitational-wave (GW) detectors will enhance studies of dense nuclear matter 20 by providing access to the post-merger signal emitted from binary neutron-star (BNS) mergers 22 ; 25 ; 14 . Direct observations of the emission from the merger remnant will provide information about the dense-matter equation-of-state (EoS) 19 ; 24 ; 56 ; 21 ; 62 ; 15 ; 34 (including the possibility of phase transitions 44 ; 8 ), the nature of hyper and supramassive NSs 9 , and the production of electromagnetic radiation 38 ; 42 . The density and temperature regime accessible to such observations cannot be reached by other probes 43 ; 30 ; 49 ; 61 ; 13 . Post-merger signals are emitted at frequencies from 1.5 kHz to 4 kHz, and redshifted down to 500 Hz to 4 kHz 33 depending on the binary distance. For ground-based detectors such as LIGO 1 , Virgo 5 , KAGRA 6 and future observatories such as the Cosmic Explorer (CE) 25 and Einstein Telescope 12 , sensitivity at these frequencies is limited by quantum measurement noise from photon shot noise on the interferometer recorded fringe light 18 . The quantum shot noise is now being reduced by almost 6 dB by injecting squeezed light 39 ; 28 ; 17 , and future observatories plan to achieve 10 dB of quantum noise suppression 25 ; 12 . Despite these improvements, most post-merger signals are still expected to be weak 25 ; 55 . Next-generation detectors are only expected to record post-merger signals with a signal-to-noise ratio (SNR) greater than five approximately once per year 25 . Below this SNR threshold, any signal will also yield almost entirely uninformative posteriors on the source properties 19 . Given that CE is projected to observe hundreds of thousands of BNS mergers annually 7 ; 36 ; 32 , techniques that lower the threshold for post-merger detection and informativeness will substantially increase the scientific yield. Future observatories are assumed to employ the same measurement process as existing detectors: recording modulations of fringe light and calibrating these modulations to a strain time-series 3 ; 54 . In the quantum measurement literature, this measurement process is known as homodyne readout 27 . Detector sensitivity with this readout is quantified through the power spectral density (PSD) of the strain readout channel, where the total density is the sum of quantum and classical noise contributions. Both the time-series data product and the quantum shot noise are a result of the homodyne readout. The quantum noise is unlike classical noises, because its effect depends on the choice of quantum measurement process. Alternative measurements schemes are physically possible and modify the statistical properties of both signals and noise. Such readout methods are still limited by randomness from quantum mechanical indeterminacy, but can have more favorable statistical figures of merit than those implied by additive quantum shot noise power, even with squeezing applied 45 ; 57 ; 29 . Additionally, they can be restricted to the frequency bands dominated by quantum noise, in practice greater than 1\, kHz, resorting to standard homodyne elsewhere. In this exploratory study, we assume the eventual existence of hardware that performs matched-filtering directly on the electro-magnetic field that is output by the interferometer. We choose a quantum measurement of power rather than of amplitude which is discretized into photon counts 41 . We present the statistical framework and observational methodology, applied to BNS post-mergers. We also compare to the standard time-series readout that provides a continuous measure of electromagnetic amplitude through homodyne. A heuristic argument of the potential benefits of photon counting may provide follows. If post-merger inference requires marginalization over nuisance parameters (such as the waveform phase), then Fisher Information scales similarly to an excess power search. Detectability of a population below detection threshold then requires a number of events that scales inversely to the square of the total noise PSD. Under photon counting, the rate of photons produced by the signal scales inversely to the power spectrum of shot noise, due to common calibration factors between the photon emission rate and noise process 41 ; 60 . In the regime where classical noise is small and results in fewer photons than the signals (per event), recording even a single photon is a post-merger detection. The detection rate under photon counting thus has a better scaling than an excess power search under homodyne. In reality, the constants of proportionality are important, the classical noise is non-zero, and the complete inference processes for each readout must be compared. The potential for improved detection and complexity of the statistical argument motivates this study. We implement a full analysis of simulated signals, directly comparing photon counting and homodyne. In Sec. II , we outline the photon counting methodology and translate it into the standard formulation of GW inference. In Sec. III , we consider individual signals and address some of the quirks of inference which relies on discrete observational data, as opposed to the continuous output of homodyne readout. We find that photon counting measurements are able to occasionally gain meaningful information from observations with SNR \lesssim 1 . Then, in Sec. IV we consider EoS constraints from a population of sources. In a hierarchical context, photon counting performs comparably to homodyne readout with 10 dB of squeezing, under current projections about the level of classical noise. An order-of-magnitude reduction of classical noise allows for significantly improved constraints. Implications of the construction of such a readout scheme and concluding remarks are presented in Sec. V . For the remainder of the manuscript, and while this analysis can be extended to multiple detectors, we consider a single CE interferometer. II Photon Counting for Post-merger detection and inference In this section, we present photon counting as an alternative readout