High-quality nanostructured diamond membranes for nanoscale quantum sensing
Alexander C Pakpour-Tabrizi, Artur Lozovoi, Sean Karg, Tecla Bottinelli Montandon, Melody Leung, Kai-Hung Cheng, Nathalie P. de Leon · 2025
Read High-quality nanostructured diamond membranes for nanoscale quantum sensing by Alexander C Pakpour-Tabrizi, Artur Lozovoi, Sean Karg, Tecla Bottinelli Montandon, Melody Leung, Kai-Hung Cheng, Nathalie P. de Leon (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-08632.txt.
Introduction
Alexander Pakpour Tabrizi and six co-authors report a gentler way to shape diamond into nanostructured membranes for quantum sensing. The sensors are nitrogen vacancy centers, atomic defects in diamond whose spins can measure tiny magnetic signals, but they must sit nanometers from the sample to work well.
Standard etching and ion milling damage the crystal below the surface, which destabilizes the charge state and shortens spin coherence for shallow centers. The new fabrication route avoids that damage while still adding photonic structures that boost the light signal. The team shows the optical and spin quality of top shallow sensors survives the process. A pick-and-place transfer then lets the finished membranes join many different sensing targets.
Catalog record
| CREATOR | Alexander C Pakpour-Tabrizi, Artur Lozovoi, Sean Karg, Tecla Bottinelli Montandon, Melody Leung, Kai-Hung Cheng, Nathalie P. de Leon |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-08632
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
High-quality nanostructured diamond membranes for nanoscale quantum sensing Alexander C Pakpour-Tabrizi, Artur Lozovoi, Sean Karg, Tecla Bottinelli Montandon, Melody Leung, Kai-Hung Cheng, Nathalie P. de Leon Abstract Deploying nitrogen vacancy (NV) centers in diamond as nanoscale quantum sensors for condensed matter and materials physics requires placing the NV centers close to the sensing target. One solution is to fabricate diamond nanostructures and integrate them with materials and devices. However, diamond etching and ion milling can introduce subsurface damage and surface defects that degrade the charge stability and spin coherence of NV centers near the surface. Here we report a procedure for fabricating low-damage nanostructured diamond membranes, and we show that this fabrication scheme preserves the optical and spin properties of state-of-the-art shallow NV center quantum sensors, within nanometers of the diamond surface, while providing significant photonic enhancement. Furthermore, we demonstrate a pick-and-place transfer method, which enables integration with diverse sensing targets. 1 Introduction NV centers in diamond have spin coherence times at the millisecond scale, optical spin initialization, and optical spin readout at room temperature and in ambient conditions, making them excellent qubits for nanoscale quantum sensing. Casola et al. 2018 ; Aslam et al. 2023 ; Rovny et al. 2024 One major area of activity is using NV centers as probes for condensed matter physics, to sense charge transport, Kolkowitz et al. 2015 ; Andersen et al. 2019 ; Vool et al. 2021 ; Palm et al. 2024 magnetic structure, Huxter et al. 2023 ; Tan et al. 2024 ; Tschudin et al. 2024 and critical dynamics. Ziffer et al. 2024 ; Liu et al. 2025 Achieving nanoscale resolution and high magnetic field sensitivity requires placing the NV centers close to the system of interest, and thus many of these demonstrations rely on either growing or transferring the material of interest on the diamond surface, Kolkowitz et al. 2015 ; Andersen et al. 2019 or fabricating diamond cantilevers for scanning probe magnetometry. Maletinsky et al. 2012 ; Scheidegger et al. 2022 Both approaches are hampered by poor NV center spin and charge properties near the diamond surface, Bluvstein et al. 2019 ; Yuan et al. 2020 which can be further degraded by surface and subsurface damage introduced during microfabrication and device integration. Kolkowitz et al. 2015 ; Leibold et al. 2025 Recently, low damage, high purity processing of bulk diamond substrates has been shown to enable NV centers within nanometers of the surface with spin coherence times exceeding 100 \mu s and no degradation to charge state stability. Sangtawesin et al. 2019 Integrating such state-of-the-art sensors into a nanostructured material for device integration and photonic enhancement would enable a wide range of sensing applications, particularly for condensed matter physics. There have been several advances in recent years in diamond nanofabrication, including reactive ion etching to define membranes, Corazza et al. 2025 , pillars Momenzadeh et al. 2015 ; Thiel et al. 2016 ; Scheidegger et al. 2022 and nanobeams, Burek et al. 2012 ; Du et al. 2017 ; Wang et al. 2022a and smart-cut techniques to fabricate diamond-on-insulator devices. Guo et al. 2021 ; Guo et al. 2024 ; Ding et al. 2024 An alternative method for realizing free-standing nanostructures is a modified version of the single crystal reactive etching and metallization (SCREAM) process, which was first developed for silicon Shaw et al. 1994 and recently adapted to single crystal, monolithic diamond. Khanaliloo et al. 2015a ; Khanaliloo et al. 2015b In this process, anisotropic, top-down etching is followed by the creation of a sidewall hardmask and subsequent quasi-isotropic etching to undercut the desired structures. In the quasi-isotropic etching step, setting the RF bias to zero induces a highly diffuse, isotropic, plasma that etches different crystallographic directions of diamond at different rates. Xie et al. 2018 This strategy has been used to fabricate microdisk resonators Mitchell et al. 2019 and diamond nanobeams. Khanaliloo et al. 2015b ; Li et al. 2023 ; Pasini et al. 2024 ; Brevoord et al. 2025 ; Mouradian et al. 2017 Here we apply the quasi-isotropic etch as part of a process to fabricate a membrane consisting of a dense array of nanobeams, with sacrificial tethers to the host substrate. To achieve a highly uniform undercut across microns of dense nanostructures, we design the device to reduce variations in the quasi-isotropic etch rate. We perform the etch at lower temperature and inductively coupled plasma reactive ion etching (ICP-RIE) power than in reference Mitchell et al. 2019 , reducing the etch rate and enabling control over the undercut geometry as well as the beam and tether thicknesses. In particular, the sacrificial tether geometry can be tuned to achieve robust suspension while still allowing mechanical separation. This enables device integration through pick-and-place transfer via micro-manipulator probes. By simultaneously ensuring that the surfaces have low contamination, low subsurface damage, and high quality oxygen termination, we fabricate nanobeams that host NV centers within nanometers of the surface that have state-of-the-art nanoscale sensing performance. We show that the spin coherence time, charge state stability, and charge dynamics of shallow NV centers in these nanobeams are in line with ”typical best” bulk substrate processing. Furthermore, the nanobeam form factor enables collection efficiency enhancement by up to a factor of seven when integrated with a sapphire target, in agreement with photonic simulations. Figure 1: (a) Fabrication scheme showing method for fabricating freestanding undercut structures. Steps 1-4 comprise the anisotropic etch of the SiN x hardmask, the anisotropic etch of diamond, followed by conformal PECVD with SiN x , then the final anisotropic etch of SiN x in the trench. Step 5 shows isotropic etching of three different width of nanobeams, resulting in different geometry of the underside. (b) Tilted SEM image (left) of nanobeam membrane, with a higher magnification image (right) of an individual nanobeam (720 nm wide and 300 nm thick). (c) SEM image shows the design of the trellis, tethers and gaps between the frame and host sample. Thinning of the diamond on the outer trellis corner section can also been seen. (d) FIB cross-sections of three different gold-coated nanobeam widths fabricated in one device run. The high contrast beads on the top of the beams result from the gold coating. (e) Optical image of the host diamond sample showing many nanobeam membranes across a large area of the 4.5mm x 4.5mm host sample. (f) SEM image overlaid with a confocal photoluminescence scan of a 720 nm wide nanobeam membrane acquired with air objective (NA = 0.9) under 520 nm (400 µW) illumination. Bright spots in the unfabricated host crystal and the nanobeams are NV centers. 2 Results 2.1 Diamond Nanobeam Membrane Fabrication The fabrication process follows the approach of Mitchell et al. Mitchell et al. 2019 , with several adaptations to create high-density nanobeam membranes compatible with pick-and-place device integration for quantum sensing applications, as described below. We prepare the surface of a (100) oriented electronic grade diamond (Element Six), according to the process outlined in Sangtawesin et al. 2019 and implant it with 15 N (3 keV, 1e9 cm -2 ) followed by an 800 ∘ C activation anneal in vacuum to create shallow NV centers. We then deposit 150 nm of silicon nitride (SiN x