WFC3/IR Starter Guide

P. R. McCullough, Joel D. Green (corresponding author) · 2025

Read WFC3/IR Starter Guide by P. R. McCullough, Joel D. Green (corresponding author) (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-08437.txt.

Introduction

P McCullough and Joel Green wrote a starter guide to analyzing infrared data from the Wide Field Camera 3 instrument on the Hubble Space Telescope. The guide introduces the Mikulski Archive for Space Telescopes as the source of the data. It targets first time users of this infrared channel and readers refreshing their memory, and it covers archival analysis rather than planning new observations, keeping the scope practical.

Three appendices support the main overview: a summary of the instrument with an optical schematic, worked cases from the Exposure Time Calculator, and a glossary of uncommon acronyms. Only the infrared channel is addressed, not the ultraviolet visible channel. The result is a compact orientation document for new archive users.

Catalog record

CREATORP. R. McCullough, Joel D. Green (corresponding author)
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-08437

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

WFC3/IR Starter Guide P. R. McCullough, Joel D. Green (corresponding author) Abstract In this starter guide, we provide a high-level overview of analysis of WFC3/IR data available from the Mikulski Archive for Space Telescopes (MAST). We intend this guide as a starting point for users examining WFC3/IR data for the first time, or for those refreshing their memory on WFC3/IR data analysis. Therefore, we focus on the analysis of archival data, not preparing new observations. Three appendices include A) a summary of the instrument and an optical schematic, B) examples from the Exposure Time Calculator, and C) a glossary of uncommon acronyms. This report addresses only data from WFC3’s IR channel; not the UVIS channel. \copyrighttext Copyright© 2026 The Association of Universities for Research in Astronomy, Inc. All Rights Reserved. \presubtitle Instrument Science Report WFC3 2025-03 1 Introduction Figure 1 : Left: WFC3/UVIS mosaic of the “Pillars of Creation,” part of the Eagle Nebula. Right: WFC3/IR mosaic of the same field of view. Credit: NASA/ESA/STScI. Installed on the Hubble Space Telescope (HST) in 2009, the Wide Field Camera 3 (WFC3) included two channels: UVIS (UV and visible) and IR (infrared). WFC3/IR improved HST’s performance with 20 \times greater sensitivity over the previous IR instrument, NICMOS (Near Infrared Camera and Multi-Object Spectrometer). Combined with HST’s spatial resolution and sensitivity, WFC3/IR created entirely new opportunities for astrophysical research. WFC3/IR also provided some of the best support for the development of future IR missions, in combination with the Spitzer Space Telescope. Unique visuals such as the Pillars of Creation (Figure 1 ), with their starkly different appearance in IR, motivated high-resolution and mid-IR instruments on the James Webb Space Telescope (JWST). The detectors on JWST’s Near Infrared Camera (NIRCam), for example, are direct descendants of those flown on WFC3/IR. As of this publication in 2025, WFC3/IR continues to play a vital role in NASA’s suite of space missions. Although some of its capabilities overlap with JWST’s NIRCam, WFC3/IR remains a scientifically powerful instrument on HST. However, WFC3/IR support may decrease over time, with a corresponding reduction in available expertise for users. With that in mind, this document aims to help preserve the legacy and usability of the WFC3/IR archive, which contains a wealth of imagery and spectra of solar system planets, exoplanets, stars, molecular clouds, supernovae, the local group, nearby galaxies, large-scale structure, and the distant universe, observed in numerous modes from hundreds of innovative scientific programs selected by a highly competitive peer review process. The purpose of this document is to assist users to make discoveries long into the future. This guide is intended as a “first stop” for new users of WFC3/IR, or for experienced users in search of a refresher. It is not an exhaustive manual , but rather an abbreviated guide summarizing tips, tricks, references, and links for further study. In this guide, we provide a series of steps to acquire, view, and analyze data. In addition, we highlight each observing mode and list a number of characteristics and properties associated with WFC3/IR data. The key documents on the WFC3 website 1 1 1 https://www.stsci.edu/hst/instrumentation/wfc3 are as follows: • The Instrument Handbook, IHB , 1 , a 700 page document describing the instrument properties, status, and capabilities, intended primarily for observers. • The Data Handbook, DHB , 2 , a 300 page document describing WFC3 data structure, integrity, and analysis, intended for primarily for analysis of archival data. • Instrument Science Reports, WFC3-YYYY-nn , generally 10-20 page in-depth studies of a single calibration characteristic of the instrument. In addition, the following websites are especially useful: • The MAST search engine or portal (§ 2 ) • A library of Python Jupyter Notebooks for data analysis (§ 6 ) • The DrizzlePac notebooks for combining images 2 2 2 https://www.stsci.edu/scientific-community/software/drizzlepac Note to the reader: any paragraph or more of prose in this report that has been copied verbatim, or nearly so, from another STScI document appears in sans-serif font (as does this paragraph) and is accompanied by a trailing citation to the original source. We have sought and secured permission from the corresponding authors. No such reproduction occurs from any source outside STScI. For the sake of brevity, references that appear within such text generally do not appear in this document; instead, check the original source. The abbreviations [IHB], [DHB], or WFC3-YYYY-nn are used for those specific citations. 2 The Main Steps, from Download to Science Download Users may download the data from MAST using a) astroquery package within astropy 3 3 3 https://astroquery.readthedocs.io/en/latest/mast/mast.html , b) the HST MAST Search Engine 4 4 4 https://mast.stsci.edu/search/ui/#/hst , or c) the more general MAST Portal 5 5 5 https://mast.stsci.edu/portal/Mashup/Clients/Mast/Portal.html . The HST search engine is best for individual queries and finding specific datasets. The Portal is a GUI that enables advanced searches of HST-specific combinations of instrument, proposal number, filter names, and other parameters. It too is searchable by many different parameters (e.g., RA/Dec, release date, filter, program ID, etc.), and contains data from many missions including HST, JWST, Kepler, GALEX, TESS, FUSE, and others. The most critical files for analysis are the Intermediate MultiAccum (IMA) files ( _ima.fits ), which contain the full 3D cube of calibrated readouts. We highly recommend all IMA reads be examined, especially for data taken with the F105W or F110W filters (explained in more detail below). The FLT ( _flt.fits ) image is a single 2D image derived by the calwf3 pipeline’s fitting up-the-ramp of the accumulated charge in each pixel stored in the corresponding IMA file. The IMA files can be used to verify any features suspected to be instrumental or spurious, which can be obscured by the additional processing steps that create the FLT files. If available for a given observation, one can also download the HAP (Hubble Advanced Products), which are single- or multi-visit mosaics of images co-aligned and combined by drizzling (cf. below). HAP files are convenient, but they have known caveats for photometry and astrometry that can be corrected with expert scientific analysis (cf. WFC3-2022-06). Display Many astronomers use the data visualizer ds9 developed by the Smithsonian Astrophysical Observatory (SAO) to visually inspect 2D images such as FLT files or 3D image cubes such as IMA files. In addition, for display and manipulation of FITS files, the user may have their own favorite general-purpose software, e.g. the proprietary Interactive Data Language (IDL) or the public-domain Python libraries such as astropy and its display_image which will display the science (SCI), error (ERR), and data quality (DQ) array for an image (§ 5 ). For more information regarding file structure, consult Chapter 2 of the DHB. Drizzle (DRZ) products ( _drz.fits ) are images generated by MAST that are corrected for alignment, distortion, cosmic rays, and combined together onto a common World Coordinate System (WCS) updated by aligning sources in the field of view to an external reference catalog (e.g., Gaia). These products can serve as an excellent starting point for many analyses. For example, DRZ products are excellent for making quality extended mosaics and overlays with other images. However, the MAST automated products may not optimally align the constituent images. Thus, users interested in precision astrometry and/or fine-tuning their mosaics should consider

Read the complete text