A Deep Learning-based time shift objective function for Full Waveform Inversion

Mustafa Alfarhan, Fuqiang Chen, George Turkiyyah, David Keyes, Ivan Vasconcelos, Matteo Ravasi · 2025

Read A Deep Learning-based time shift objective function for Full Waveform Inversion by Mustafa Alfarhan, Fuqiang Chen, George Turkiyyah, David Keyes, Ivan Vasconcelos, Matteo Ravasi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-08134.txt.

Introduction

Mustafa Alfarhan, Fuqiang Chen, George Turkiyyah, and David Keyes replace a costly time shift calculation inside full waveform inversion. That inversion method builds underground velocity maps by matching modeled and observed seismic traces. Waveforms oscillate, so simple mismatch measures skip cycles when the starting model is poor, and classic dynamic time warping is expensive here.

A neural network learns, in supervised fashion, the shifts that align two time series. Inside inversion it compares traces smoothly and cheaply, with gradients available through backpropagation. On the Marmousi model and a Chevron blind test, convergence matched a soft warping method while adjoint source computation became much faster.

Catalog record

CREATORMustafa Alfarhan, Fuqiang Chen, George Turkiyyah, David Keyes, Ivan Vasconcelos, Matteo Ravasi
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE38 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-08134

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Deep Learning-based time shift objective function for Full Waveform Inversion Mustafa Alfarhan, Fuqiang Chen, George Turkiyyah, David Keyes, Ivan Vasconcelos, Matteo Ravasi Abstract Full Waveform Inversion (FWI) is a powerful technique for estimating high-resolution subsurface velocity models by minimizing the discrepancy between modeled and observed seismic data. However, the oscillatory nature of seismic waveforms makes point-wise discrepancy measures highly prone to cycle-skipping, especially when the initial velocity model is inadequate. To address this challenge, various alternative misfit functions have been proposed in the literature, each with unique strengths and limitations. Dynamic Time Warping (DTW) is a popular technique in signal processing for aligning time series using dynamic programming. While a differentiable variant of DTW has been recently proposed, its use in FWI is hindered by high-frequency artifacts in the adjoint source and the substantial computational cost of gradient evaluations. In this study, we propose a neural network-based approach to learn the time shifts that align two time series in a supervised manner. The trained network is then utilized to compare traces from observed and modeled seismic data, offering a stable and computationally efficient alternative to DTW. Furthermore, the inherent differentiability of neural networks via backpropagation enables seamless integration into the FWI framework as a misfit function. We validate this approach on two synthetic datasets, namely the Marmousi model and the Chevron blind test dataset, demonstrating in both cases a similar convergence behavior to that of SoftDWT whilst drastically reducing the computational time of the adjoint source calculation. Keywords Full waveform inversion \cdot time-shift estimation \cdot neural networks \cdot automatic differentiation \cdot adjoint sources 1 Introduction Full Waveform Inversion (FWI) is a technique aimed at inverting seismic data for a high-resolution subsurface model by matching simulated and observed seismograms. Due to the oscillatory nature of seismic recordings and the use of gradient-based numerical optimization schemes, the highly nonlinear and ill-posed nature of FWI can lead to solutions falling into local minima, thus likely failing to recover a geologically plausible subsurface model. This problem, also known as cycle-skipping, arises when the simulated and observed seismograms are separated from each other by more than half a cycle. To alleviate the problem of cycle-skipping, hierarchical or multi-scale FWI is usually carried out ( 3 ) . In multi-scale FWI, inversion is initially performed using a low-frequency filtered version of the data. As the inverted model improves, the higher-frequency components are gradually introduced into the process. However, in practice, it is not always possible to access sufficiently low-frequency information to bootstrap the FWI process in the presence of a poor quality initial background model. To mitigate cycle-skipping, an active area of research in FWI is the design of misfit functions that compare the kinematic component of the modeled and observed seismograms rather than their amplitudes, as is the case for the commonly used L_{2} norm. Significant effort has been devoted to identifying misfit functions based on cross-correlation ( 32 ; 33 ; 20 ; 34 ; 37 ; 10 ; 14 ) , minimizing the difference between the observed and calculated traveltimes using cross-correlation ( 21 ; 22 ) , data envelope ( 2 ; 8 ) , and the optimal transport distance ( 13 ; 26 ; 5 ; 4 ; 36 ; 28 ; 16 ) . However, in practice, including any of these functionals in FWI comes with its own challenges. For example, some of them are sensitive to noise, unstable, require proper data normalization, and/or are computationally demanding. A technique commonly used in signal processing to compare two time series of possibly different lengths robustly is dynamic time warping (DTW) ( 30 ) . Despite its non-differentiability, the time shift estimate from the DTW algorithm has been successfully employed as an objective function in FWI ( 24 ) and tomography ( 35 ) to mitigate the problem of encountering local minima. However, the discontinuous nature of this objective function can lead to sharp transitions in the adjoint source and the associated gradient ( 6 ) . A differentiable DTW method has been proposed by 9 known as softDTW, which works by relaxing the minimum operator to a soft form. Recently, 7 applied differentiable softDTW with a penalization term to FWI to emphasize the traveltime differences. However, a misfit function derived from the time shift produced by the softDTW method suffers from two drawbacks: it can yield negative values, and its minimum is not necessarily obtained when the two time series are identical. To address these issues, 15 recently proposed using the divergence form of softDTW within FWI, motivated by the work of 1 . Although DTW and its variants have better convexity than other traveltime-based objective functions, they require significant hyperparameter tuning to reach reliable solutions. Furthermore, although dynamic programming can be used to compute the warping path efficiently, embedding this approach within FWI remains computationally expensive because a DTW problem must be solved for each trace at each FWI iteration. Deep learning has recently emerged as an alternative solution for estimating the time shift or the time/space warping between two seismic datasets. 17 developed a deep learning workflow based on FlowNet to estimate optical flow between consecutive seismic slices, generating sequence stratigraphy without manual labeling and ensuring geological consistency through vertical-order constraints and cross-calibration of optical flow. Similarly, 11 introduced SeisFlowNet, a CNN-based approach to seismic image registration, which significantly improves the accuracy and robustness of traditional methods, particularly under noise, phase distortions, and frequency variations in the two datasets. More recently, 12 adapted a modified VoxelMorph architecture based on UNet from medical imaging to 4-D seismic data, achieving detailed 3-D time shift estimations, enhancing the robustness and applicability of time-lapse seismic data analysis through a self-supervised learning approach. The application of such a UNet based architecture to seismic time shifts demonstrates the relevance of such multiscale detail-preserving architectures to structured shift-estimation tasks. Collectively, these studies demonstrate the significant potential of deep learning techniques in improving the mapping between seismic data. Building on these advances, we propose using deep learning to learn the time shift between traces of the modeled and observed seismic data, and therefore quantify their discrepancy as a metric for FWI. Since neural networks are differentiable, this approach offers a cost-effective alternative compared to DTW while still being potentially robust to cycle-skipping. Integrating the neural network into the FWI misfit function inherently produces smooth, well-behaved gradients, making it an attractive candidate for computing FWI adjoint sources. Furthermore, smoother, well-behaved gradients may facilitate faster and more stable convergence, although a formal analysis is beyond the scope of this study. This paper is organized as follows. The Theory section presents the theoretical framework underlying our approach, including a detailed description of the neural network architecture and the training process used to estimate the time shift between two input signals. The Numerical Examples section provides a series of simulations to validate our method, outlining the setup and results of seismic survey experiments. The Discussion section offers an in-depth analysis of the results, highlighting the advantages of our approach, and identifying potential areas for improvement. Finally, the Conclusions section summarizes the key findings of this study. 2 Theoretical Framework In this study, we integrate a neural network into the FWI

Read the complete text