Controlling viscosity to engineer focal conic domains in photonic cellulose nanocrystal films
Diogo V. Saraiva, Lotte Polling, Ivo R. Vermaire, Sander J. W. Vonk, Freddy T. Rabouw, Lisa Tran · 2025
Read Controlling viscosity to engineer focal conic domains in photonic cellulose nanocrystal films by Diogo V. Saraiva, Lotte Polling, Ivo R. Vermaire, Sander J. W. Vonk, Freddy T. Rabouw, Lisa Tran (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-06981.txt.
Introduction
Diogo V Saraiva and five co-authors learn to steer the self-assembly of cellulose nanocrystal films so their structural color comes out as built. These plant-derived crystals arrange into cholesteric, spiral designs that reflect certain colors, offering a sustainable route to photonic films. Uniform color and ordered defect patterns called focal conic domains have been hard to achieve reliably.
Across twenty-four dish-cast films with varied salt concentrations and sonication doses, the team combined viscosity readings, time-lapse polarized microscopy, and angle-resolved reflectance. Viscosity, set jointly by salt screening and sonication breaking up bundles, governed how fully the liquid-crystal droplets merged. Low viscosity gave large uniform domains; high viscosity froze in disorder. In a narrow middle window the team reproducibly built photonic focal conic domains, establishing design rules.
Catalog record
| CREATOR | Diogo V. Saraiva, Lotte Polling, Ivo R. Vermaire, Sander J. W. Vonk, Freddy T. Rabouw, Lisa Tran |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 64 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-06981
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Controlling viscosity to engineer focal conic domains in photonic cellulose nanocrystal films Diogo V. Saraiva, Lotte Polling, Ivo R. Vermaire, Sander J. W. Vonk, Freddy T. Rabouw, Lisa Tran Abstract Cellulose nanocrystals (CNCs) form cholesteric architectures that can have color specific reflectivity and enable sustainable photonic films. However, achieving uniform color, suppressing iridescence, and accessing ordered defect structures such as focal conic domains remain challenging. Here, we control the photonic properties of CNC films by steering the self assembly process. Across 24 dish-cast films with varying salt concentrations and sonication doses, we combine viscosity measurements, timelapse polarized optical microscopy, and angle-resolved reflectance spectroscopy to correlate evaporation dynamics with photonic structure. We show that viscosity, jointly controlled by NaCl -mediated electrostatic screening and sonication-induced bundle fragmentation, dictates the extent of tactoid coalescence. Low-viscosity suspensions generate large, homogeneous cholesteric domains and narrow spectral responses, while high viscosity leads to arrested, heterogenous domains and increased diffuse light reflection. Critically, within a narrow parameter window of intermediate ionic strength and moderate sonication, we reproducibly engineer photonically active focal conic domains. These results identify viscosity-driven flow as a key, previously underappreciated factor in CNC self-assembly and establish design rules for producing structurally colored films with tunable photonic response, reduced iridescence, and controllable defect architectures. † † email: [email protected] † † affiliation: Soft Condensed Matter and Biophysics, Debye Institute for Nanomaterials Science, Utrecht University, 3584 CC Utrecht, The Netherlands † † suppinfo: Structural color, originating from the interference between reflections of light on periodic or quasi-periodic nanostructures, has emerged as a promising mechanism for producing vibrant, pigment-free coloration. Its potential for use in sustainable coatings, optical sensors, and anti-counterfeiting technologies has stimulated extensive research interest 43 ; 9 ; 52 . Among various material systems, cellulose, an abundant and renewable biopolymer derived from plant biomass, offers a sustainable platform for the fabrication of structurally colored materials. The crystalline domains of cellulose fibrils can be isolated via acid hydrolysis to yield cellulose nanocrystals (CNCs), rod-like nanoparticles a few nanometers in width and hundreds of nanometers in length. When dispersed in water at appropriate concentrations, CNCs spontaneously self-assemble into a cholesteric liquid crystalline phase, whose helicoidal structure can be preserved upon solvent evaporation, producing iridescent solid films 40 . The structural periodicity is quantified by the pitch ( p ), defined as the distance required for the rod-like nanocrystals to complete a 2\pi rotation (see Figure 1 A, right inset). The pitch determines the wavelength of selectively reflected light. From Bragg’s law, in idealized, defect-free helical assemblies, the reflected wavelength ( \lambda ) is given by \lambda=np\sin(\theta) (1) where n is the average refractive index of the film ( \approx 1.6 for CNCs) 36 , and \theta is the angle of reflection relative to the film’s surface 10 . Consequently, variations in p or domain orientation typically give rise to strong angle-dependent color changes in cholesteric CNC films. Evaporation-induced self-assembly of CNCs, typically performed in confined geometries such as petri dishes, proceeds through tactoid nucleation, coalescence, and eventual solidification, depicted schematically in Figure 1 A (right) 47 . The fully dried film consists of multiple cholesteric domains delineated by topological defects that originate during the coalescence of tactoids 50 . Each domain is characterized by a specific pitch, orientation, and lateral extent, collectively determining the film’s photonic response. Historically, optimization of CNC-based photonic materials has focused on promoting structural uniformity and minimizing defects to achieve narrow reflection bandwidths and high color saturation 53 . Such uniformity has been pursued through strategies including reduction of CNC polydispersity 26 , modulation of solvent evaporation rate 47 , and application of shear to control helical alignment 42 ; 34 . While these approaches enhance structural order, they inherently preserve the angular dependence of the reflected color (Equation 1 ). Iridescence (angle-dependent color) remains intrinsic to the cholesteric architecture, limiting the use of CNC films in applications that require a consistent appearance over wide viewing angles. Recent studies have highlighted that the deliberate introduction of controlled disorder in a photonic system can suppress angular color dependence 3 ; 31 . Controlled disorder, manifested through spatial variations in domain orientation, defect distribution, or pitch, can induce diffuse light scattering that averages out directional reflection, thereby producing noniridescent structural color. Such effects are widely observed in biological photonic systems, where partial disorder and hierarchical organization yield angle-independent coloration 15 ; 1 . Consequently, the controlled manipulation of topological defects and domain heterogeneity in CNC assemblies presents a promising strategy to modulate photonic properties and achieve a uniform visual appearance. Tuning the self-assembly pathway of CNCs through chemical and mechanical means enables control over the resulting structural hierarchy. The addition of electrolytes, such as sodium chloride ( NaCl ), screens the electrostatic repulsion between CNCs, strengthening chiral interactions and decreasing the pitch size, p , depicted schematically in Figure 1 A (left) 12 ; 11 ; 39 ; 27 . Conversely, ultrasonication disrupts CNC bundles that act as chiral dopants, thereby weakening chiral interactions and increasing p (Figure 1 A, center) 4 ; 38 ; 19 . Both modifications influence multiple stages of evaporation-driven self-assembly: from tactoid nucleation and coalescence to kinetic arrest, as well as the suspension’s rheological behavior 19 ; 27 ; 38 ; 4 ; 12 ; 24 ; 2 . Although the effects of salt and sonication on CNC viscosity have been individually reported 51 ; 44 ; 5 , their combined influence and its implications for defect evolution and flow-induced ordering remain poorly understood. In this work, we systematically investigate the interplay between ionic content and sonication in directing the self-assembly and final cholesteric structure of dish-cast CNC films. We produce an array of 24 CNC films under varying salt concentration and sonication dose and characterize their optical and structural properties using polarized optical microscopy, time-resolved imaging, and angle-resolved spectroscopy. Our observations reveal the emergence of convective flow cells during tactoid annealing, highlighting the pivotal role of solvent viscosity in defect evolution and domain organization. We demonstrate that optimizing salt concentration and sonication dose provides a means to control viscosity-driven flow dynamics and, consequently, the balance between structural order and controlled disorder. This study establishes a framework for engineering noniridescent structural color through the deliberate regulation of topological defects and domain heterogeneity in sustainable CNC-based photonic materials. This work establishes a mechanistic framework linking physicochemical processing parameters, namely salt concentration, sonication dose, and solvent viscosity, to the evolution of defects, domain morphology, and optical response in cellulose nanocrystal (CNC) films. By revealing how flow-mediated self-assembly governs the emergence and stabilization of topological defects, we demonstrate that controlled disorder can be purposefully introduced to tune the resultant optical properties. Our results advance the understanding of how hierarchical organization in sustainable colloidal materials can be tuned through the subtle balance between order and disorder. Beyond elucidating the interplay between electrostatic screening, particle morphology, and hydrodynamic flow in colloidal self-assembly, this study provides design principles for tuning structural color through defect control, opening new avenues for scalable bio-derived photonic systems. 1 Results and discussion 1.1 Tuning color with salt and sonication To investigate the effects of salt and sonication on the optical appearance of CNC films, we evaporated 24 CNC suspensions while tuning