Programmable Telescopic Soft Pneumatic Actuators for Deployable and Shape Morphing Soft Robots
Joel Kemp 2 3 1 , André Farinha 2 1 , David Howard 2 , Krishna Manaswi Digumarti 3 and Josh Pinskier 2 · 2025
Read Programmable Telescopic Soft Pneumatic Actuators for Deployable and Shape Morphing Soft Robots by Joel Kemp 2 3 1 , André Farinha 2 1 , David Howard 2 , Krishna Manaswi Digumarti 3 and Josh Pinskier 2 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-06673.txt.
Introduction
Joel Kemp and colleagues present a family of soft air-driven actuators that telescope outward like an extending spyglass. Soft robots promise free-form motion in any direction, but the design space is too vast to search directly. One class with tunable settings makes that space manageable, letting designers dial in dimensions and watch behavior follow.
These units lengthen along their axis when inflated, suiting deployable structures and work in tight spaces. A geometry generator builds models from high-level choices, and careful tests mapped how parameters govern extension, bending, expansion, and stiffness. A soft quadruped with deploying legs shows the payoff, walking after unfolding itself to fit through confined spaces.
Catalog record
| CREATOR | Joel Kemp 2 3 1 , André Farinha 2 1 , David Howard 2 , Krishna Manaswi Digumarti 3 and Josh Pinskier 2 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-06673
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Programmable Telescopic Soft Pneumatic Actuators for Deployable and Shape Morphing Soft Robots Joel Kemp 2 3 1 , André Farinha 2 1 , David Howard 2 , Krishna Manaswi Digumarti 3 and Josh Pinskier 2 Abstract Soft Robotics presents a rich canvas for free-form and continuum devices capable of exerting forces in any direction and transforming between arbitrary configurations. However, there is no current way to tractably and directly exploit the design freedom due to the curse of dimensionality. Parameterisable sets of designs offer a pathway towards tractable, modular soft robotics that appropriately harness the behavioural freeform of soft structures to create rich embodied behaviours. In this work, we present a parametrised class of soft actuators, Programmable Telescopic Soft Pneumatic Actuators (PTSPAs). PTSPAs expand axially on inflation for deployable structures and manipulation in challenging confined spaces. We introduce a parametric geometry generator to customise actuator models from high-level inputs, and explore the new design space through semi-automated experimentation and systematic exploration of key parameters. Using it we characterise the actuators’ extension/bending, expansion, and stiffness and reveal clear relationships between key design parameters and performance. Finally we demonstrate the application of the actuators in a deployable soft quadruped whose legs deploy to walk, enabling automatic adaptation to confined spaces. PTSPAs present new design paradigm for deployable and shape morphing structures and wherever large length changes are required. I Introduction Soft robotics offers a transformative potential to create both highly unconventional and truly lifelike robots. Freed from the constraints of traditional robot design, soft robotics unlocks a new world of possibilities in deployable, reconfigurable and shape adaptive robots, which exploit their form to function efficiently across environments [ 13 , 2 , 16 ] . The freeform and unconstrained design potential soft robotics presents an opportunity and a challenge, as the vast design space is too large to be meaningfully searched by even the best optimisation algorithms [ 18 ] . Decomposing continuum robots into discrete modules offers a tractable alternative path, in which continuum modules can be designed independently then assembled into arbitrarily complex robots [ 27 , 14 , 26 , 3 ] . Modularity enables rapid robot design and an efficiently searchable design domain, with the only interconnections breaking the robot continuum. Whilst modularity typically involved homogenous modules, multiple distinct modules can also be incorporated, facilitating path generation and grammar-based robot evolution [ 30 ] . Where individual modules are parametrised and shape-programmable, complete, multi-environment robots can be efficiently generated through hierarchical optimisation [ 4 , 10 ] . Fig. 1 : Programmable Soft Telescopic Actuator Overview: a) 2D curve produced by parametric actuator generator which is revolved to produce the 3D actuators. b) Resulting 3D Printed linear actuator at rest and inflated. c) Application of bending optimised actuators in soft quadruped. The actuators inflate with positive pressure, retain their shape at atmosphere and retract under vacuum TABLE I : Comparative Performance Metrics of Axial Soft Pneumatic Actuators Actuator Type Max Force (N) Response (s) Expansion Contraction Ratio 1 Source Origami: Zigzag 432 < 0.3 Recovery weight Vacuum C: 90% [ 15 ] Origami: Kresling 6.4 - Fluid pressure Vacuum E–C: 130% [ 23 ] Origami: Yoshimura 50 < 2.5 Fluid pressure Vacuum E: 72% C:46% [ 22 ] Telescopic 8.1 7–8 Fluid pressure Passive E: 430% [ 8 ] Telescopic (This Work) 5 2 1.5-3 Fluid pressure Vacuum E: 650% Figure 6 .A Bellows > 30 - Passive Vacuum C: 52% [ 20 ] Bellows: Euglenoid - 60s Fluid pressure Vacuum E:100 C: 50% [ 6 ] 1 Calculated as (l_{1}-l_{0})/l_{0} . Note that l_{1} is taken as the length after a power stroke, so the maximum value in contraction cannot exceed 100%, while under expansion there is theoretically no limit. 2 Semi-automated tests capped at 5N Existing soft robot modules have largely been based around bending, twisting and contracting actuators [ 29 ] , particularly Soft pneumatic actuators (SPAs). SPA modules employ deformation modes including bending, twisting, axial extension/contraction, radial change and combinations of these to produce soft robots with conformable grasping and adaptive locomotion abilities [ 9 , 19 , 25 , 5 , 12 , 21 ] . Of these, axial deformation is favoured to create thrust/elongation in artificial muscles, resulting in several classes of actuator with distinct mechanical principles, including origami-inspired, telescopic, and bellows actuators ( Table I ). Origami-inspired SPAs use programmable folding to transfer forces directly without material stretching [ 17 ] . Bellows SPAs exploit corrugated soft structures that extend under positive pressure or contract via vacuum [ 6 , 20 , 11 ] . Fig. 2 : A: Visualisation of the NURBS segments and their union to construct the midline. B: Visualisation of the thickness offset applied to construct 2D cross-section. C: Visualisation of 3D construction via angular cross-sections. Shaded cross-sections are user-defined; dotted cross-sections are interpolated by the design framework \theta_{i}=30 . Compared to other classes of SPA, Telescopic SPAs are substantially under-explored, and have only been demonstrated only in soft grasping applications [ 8 , 7 , 24 ] . Telescopic SPAs inflate pre-folded elastomeric chambers to extend in pre-defined shapes. When pressurized, concentric chambers inflate sequentially, creating a large extension from a compact base. As the extension is created by material unfolding along, rather than perpendicular to, the extension axis, the axial and bending stiffness are largely decoupled, creating the possibility for programmable motion [ 28 ] and stiffness profiles, all within a deployable soft module. To exploit these underexplored features of telescopic SPAs, we develop a framework for shape programmable telescopic soft pneumatic actuators (PTSPAs). We establish a flexible but tractable parameterised PTSPA generator and characterise the relationship between key design parameters in semi-automated testing, enabling the creation of bespoke, deployable PTSPA modules. Our main contributions are: (i) the establishment of a new class of deployable shape programmable pneumatic actuators suitable for deployable structures, and optimisation and learning (ii) the development of a geometry generation pipeline to rapidly create bespoke modules, (iii) a structured exploration of the PTSPAs design domain using semi-automated testing to characterisation of PTSPA modules’ performance and reveal design capabilities, and (iv) the demonstration of PTSPA capabilities in a multi-modal deployable ’Turtle-Roo’ soft robot for unguided free and constrained space locomotion. II Automated Design Framework The geometry of telescopic soft actuators is defined by a set of parameters that describes a 1D curve ( Section II-A ) and the construction of its corresponding 2D cross-section ( Section II-B ). The 3D geometry is then constructed by smoothly connecting 2D cross-sections defined across multiple angular planes. This framework accommodates both axisymmetric designs (purely telescopic actuation) and asymmetric designs (bending during extension, Section II-C ). Fig. 3 : Geometric response of 1D input parameters. II-A Midline Construction The midline is controlled using Non-Uniform Rational B-splines (NURBS), selected for their local control properties and robust scaling behaviour. NURBS curves are defined as: C(u)=\frac{\sum_{i=0}^{n}N_{i,p}(u)w_{i}P_{i}}{\sum_{i=0}^{n}N_{i,p}(u)w_{i}} (1) where N_{i,p}(u) are B-spline basis functions, w_{i} are control point weights, and P_{i} are control points. The knot vector U=\{u_{0},u_{1},...u_{m}\} maps control points to the local arc-length coordinate. As shown in Figure 2 A, each B-spline segment consists of five control points and represents half of a curve period. The geometry of