Enhanced Coalescence in Driven Foams
Alice Requier, Andrea Plati, Emmanuelle Rio, Anniina Salonen · 2025
Read Enhanced Coalescence in Driven Foams by Alice Requier, Andrea Plati, Emmanuelle Rio, Anniina Salonen (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-06480.txt.
Introduction
Alice Requier, Andrea Plati, Emmanuelle Rio, and Anniina Salonen shake foams and watch their bubbles merge far more than expected. Outside driving can give soft materials unusual behaviors. Here, mechanical vibration of nearly flat, quasi-two-dimensional foams triggered heavy coalescence, where neighboring bubbles pop into one another instead of keeping their walls.
A yield-stress continuous phase, the liquid that must be pushed past a threshold to flow, strengthened the effect further. Vibration strength and liquid fraction tune the contest between slow coarsening and outright merging, producing structural patterns rarely seen in still foams. A statistical model tracks the falling bubble count over time and matches the observations quantitatively.
Catalog record
| CREATOR | Alice Requier, Andrea Plati, Emmanuelle Rio, Anniina Salonen |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-06480
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Enhanced Coalescence in Driven Foams Alice Requier, Andrea Plati, Emmanuelle Rio, Anniina Salonen Abstract External driving leads to the emergence of unique phenomena and properties in soft matter systems. We show that driving quasi-2D foams by mechanical vibration results in significant bubble coalescence, which is enhanced by the continuous phase yield stress. The competition between coarsening and coalescence can be modulated through vibration amplitude and foam liquid fraction, which can be used to create unusual structural motifs. The combined effect of coarsening and coalescence is captured through a statistical model that quantitatively describes the time evolution of the number of bubbles. Introduction— Soft matter systems exhibit unique phenomena when subjected to external driving 21 . This is the case of shear thickening suspensions 26 ; 7 , vibrofluidised granular materials 27 ; 5 ; 22 or active colloids 13 ; 30 ; 3 ; 29 . The macroscopic properties of these systems depend significantly on the combined effects of constituting materials and driving mechanisms. All this becomes even more complex when considering the coexistence of multiple phases, a condition that is nevertheless ubiquitous in the natural environment and applications. Liquid foams are a paradigmatic case of multiphase matter composed of gas bubbles dispersed in a continuous fluid phase 4 . They are unstable in time as their average bubble size grows through both coarsening and coalescence processes. A foam coarsens as gas transfers between neighbouring bubbles because of differences in Laplace pressure, eventually leading to a self-similar growth regime and a homogeneous structure 20 ; 28 ; 14 . As for coalescence, it is caused by the rupture of thin films between bubbles and can result in catastrophic foam collapse and highly heterogeneous foam morphologies 16 . As both phenomena influence foam structure and are influenced by it, it is difficult to disentangle their contributions to foam ageing. During many processes, foams undergo mechanical perturbations, such as shear or vibrations, which may alter their ageing process. If the foam is sheared enough to promote significant rearrangements, the average film thickness increases and coarsening slows considerably 24 . However, vigorous shearing can promote bubble coalescence in 2D foams 18 . As for mechanical or ultrasonic vibrations, they also lead to foam destabilisation by promoting coalescence or accelerating drainage 19 ; 25 , making them good candidates in the design of foam breakers 2 . The enhancement of coalescence induced by vibrations could be due to the local deformation of the liquid channels 6 . In order to improve foam stability, yield stress fluids are commonly used in foods and cosmetics, as they can hinder bubble rearrangements 12 , leading to slower coarsening rates 23 ; 10 , and can eventually result in unusual bubble patterns 11 . A foam continuous phase with a sufficiently high yield stress can even arrest bubble growth 17 ; 10 . In this Letter, we investigate the interplay between coarsening and coalescence by mechanically vibrating a foamy yield stress fluid. We show in particular that the destabilising impact of vibrations is exacerbated by the presence of the yield stress fluid. The driving amplitude can be used to modulate the relative rates of coarsening and coalescence, which can be described using the statistical model that we propose. Combined tuning of the vibration amplitude and the foam liquid fraction gives us control of the resulting foam morphology. Figure 1: Snapshots of the system’s structure once the foam becomes 2D (time t_{0} ) and after 5 hours for vibrated ( f = 53 Hz, A = 0.26 mm) and non-vibrated foamed emulsions with \phi=\{65,80\} \% . The emulsion with oil fraction \phi=80 \% has a yield stress of \tau_{c}\sim 16.5 Pa, while none is measured at \phi=65 \% . The edge of each photograph is 70 mm. Experimental setup— We work with quasi-2D foams consisting of a single layer of bubbles confined between two horizontal plates 1 mm apart. This configuration eliminates gravitational drainage and enables direct visualisation of the foam structure during destabilisation. The continuous phase is an emulsion composed of an aqueous solution of Sodium Dodecyl Sulfate at 30 g/L and drops of sunflower oil (both from Sigma Aldrich), which are produced with the double-syringe technique 9 . Depending on the oil volume fraction in the emulsion \phi , it can behave as a viscous fluid ( \phi=65\% ) or exhibit a yield stress ( \phi=80\% , \tau_{c}\sim 16.5 Pa 1 ). Air is incorporated into the emulsions using a planetary motion food processor (Kenwood KMIX750AW, 1000 W) to make foams at varying liquid fractions \varepsilon\in[8,20] \% . Once ready, the foam is sealed between two plates attached to an electrodynamic shaker (Brüel & Kjær, LDS V400). A sinusoidal electric signal is first sent to an amplifier (Brüel & Kjær, LDS LPA600) and then to the shaker, which imposes a vertical displacement z_{\rm{p}}(t)=A\sin(2\pi ft) to the cell. In all our experiments we kept f=53 Hz and varied the vibration amplitude A\in[0,0.26] mm, which gives a range of peak acceleration of \Gamma=(2\pi f)^{2}A/g\in[0.1,2] . At the beginning of the experiment, vibrations are switched on, and the bubbles start to grow. After a time t_{0} they become big enough to form a single layer and the foam is considered as 2D 11 . In the following, we plot everything as a function of t-t_{0} . Snapshots of the foam structure have been acquired every 30 seconds with a high-resolution camera (Basler a2A2590 - 60 \mu m, 3840 × 2748 pixels 2 ) equipped with a lens (Fujinon 12 mm 1:1.8) and positioned above the setup. Image processing is performed using custom MATLAB scripts. First, foam images are segmented using adaptive thresholding, and then their structures are skeletonised through a watershed algorithm. This allows us to measure the radius of each bubble and their total number. Foam destabilisation— In Fig. 1 , we compare the evolution of foamed emulsions at \phi=65 \% and \phi=80 \% with and without applying mechanical vibrations, at a fixed liquid fraction \varepsilon=10 \% . We show how the coarsening evolution affects the foam structure over time by comparing snapshots taken at the initial time t_{0} and after 5 hours. In the studied time frame, non-vibrated foams at \phi=\{65,80\} \% showed qualitatively similar results, where the structure evolves mainly through coarsening (Figs. 1 a, b, e and f). In panels c and d, we show the comparison for a vibrated foam with \phi=65 \% . In this case, we observed an initial evolution mainly characterised by coarsening, followed by a regime with coalescence events homogeneously distributed in time (see video in the Supplemental Materials). From panel d, we also note that coalescence leads to a more advanced state of destabilisation at time t_{0}+5 h characterised by a few very large bubbles surrounded by foam. However, locally, we find an equilibrium topology i.e. Plateau’s laws are respected 28 . When considering the vibrated foam with \phi=80 \% (Figs. 1 g and h), the scenario changes qualitatively. In this case, we observe an initial coarsening regime followed by a cascade of coalescence events, which dramatically accelerate foam destabilisation (see video in the Supplemental Materials). Moreover, after five hours, the surface covered by bubbles is drastically reduced and most