“Niñas Atómicas” (Atomic Girls): An initiative that generates opportunities for young girls in STEM
Giovanna Cottin, Francisca Garay · 2025
Read “Niñas Atómicas” (Atomic Girls): An initiative that generates opportunities for young girls in STEM by Giovanna Cottin, Francisca Garay (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-05754.txt.
Introduction
Giovanna Cottin and Francisca Garay report on Niñas Atómicas, a workshop that brings Chilean schoolgirls into real particle physics. The program aims to build critical thinking and the transferable skills scientists use daily. Girls from across Chile apply, and each year female scientists guide them for two weeks.
The girls learn particle physics, electronics, programming, and scientific method by building a working muon counter of their own. With those detectors they measured the muon flux and the muon's lifetime themselves. The authors describe the teaching plan, give the detector build in detail, and share how the 2024 and 2025 cohorts experienced the workshop. They offer the account to physics outreach and education communities.
Catalog record
| CREATOR | Giovanna Cottin, Francisca Garay |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-05754
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
“Niñas Atómicas” (Atomic Girls): An initiative that generates opportunities for young girls in STEM Giovanna Cottin, Francisca Garay Abstract We report on an initiative that seeks to encourage high school girls to develop critical thinking and transferable skills widely used in scientific work, as well as to generate a concrete space of opportunities for girls to experience how real science is done. Our “Niñas Atómicas” workshop combines the teaching of particle physics, electronics, programming and scientific methodology through building and operating a dedicated experiment: a muon counter. Girls from all over Chile can apply to this workshop, where every year they are guided by female scientists for two weeks. We report on the contents and methodology of our workshop and provide details on how to build the muon detector counter experiment. We report results on muon flux and proper lifetime, two muon properties which can be extracted from the data collected by the girls with the muon detectors they built themselves. Insights into the girl’s experiences during the 2024 and 2025 editions of the workshop are also detailed, with the aim to contribute to the wider physics education research and outreach communities. I Introduction Science is everywhere. However, the education of it and the opportunities to experience it are not universally available and gender inequalities exist. According to UNESCO 39 , only 35\% of higher-education students that are enrolled in subjects related to science, technology, engineering and mathematics (STEM) are female. Globally, only 28\% of science researchers are women. Particularly in Chile, gender scoring gaps at the high-school level in mathematics 34 ; 31 may correlate with gender stereotypes 16 , lack of motivation, confidence or limited access to resources and educational opportunities 27 . In this context, our science workshop “Niñas Atómicas” (Atomic Girls) 36 aims to provide a concrete space of opportunities for high-school girls to experience how real science is done 1 1 1 They are thought by scientists, they built their own experiment, take data with it, analyze it, come up with a scientific question, and then report on their research results. More details in section III . . Our objectives are twofold: i) foster critical thinking and transferable scientific skills useful in our modern world, such as programming or a basic understanding of electronic systems, and ii) that this experience aids in their decision-making process by giving them a concrete understanding of what is science and how science is done, before choosing a major 2 2 2 Having completed STEM related courses at the high-school level helps define a “STEM-readiness” 10 metric, which can impact the chances of entering a STEM program. . Our workshop revolves around an experiment that counts muons (the “muon counter”). In section II we motivate and describe the experiment. In section III , we describe the contents and methodology of the workshop. In section IV we present results on muon properties based on the data the girls took after building their detectors, as well as results addressing the perception the girls had after finishing the workshop. We conclude in section V hoping that the ideas our initiative brings may be replicated or inspire others alike. II The muon experiment Why muons?: Muons are elementary particles belonging to the second generation of leptons in the Standard Model of Particle Physics 37 . They are particles about 200 times heavier than electrons, and can penetrate deeply through matter without loosing too much energy. Muons are produced in the decays of charged mesons when cosmic rays interact with our atmosphere. They have a proper lifetime close to 2.2\mu s 19 , which (thanks to Einstein’s special relativity), allows them to travel several kilometers before reaching the earth’s surface. They are the most abundant electrically charged particles at sea level 30 . Roughly, one muon per second transverses the surface area of a hand. Therefore, if we build a small detector, and place it at different altitudes in the surface of the earth, we can measure them with different fluxes. Experimental setup: The muon counter includes two plastic scintillators, each equipped with a light-sensing silicon photomultiplier (SiPM). The scintillators are wrapped in a reflective foil to concentrate the light emission to the SiPM. The detector also includes two hexagonal casings and a main case, made from plastic rolls (filament) of PLA plastic printed with a standard 3D printer. It is important that the filament is black, as other colors can sometimes let light seep through. The print quality should also be good to make the piece as dense as possible, or alternatively, the infill parameters can be increased so that the piece acts as a black box 3 3 3 With printers that provide a high-quality finish, this adjustment is often unnecessary. . This is so the SiPMs are covered in a dark, non-reflective surface in order to reduce external light contamination to the muon signal. A scintillating material has the property of (re-)emitting energy in the form of photons when a charged particle (as a muon) deposits energy in it. These photons are then processed by the SiPMs, triggering a Geiger discharge and creating a measurable current. The current then goes through a custom-made 4 4 4 Owned and developed by the Center for Theoretical and Experimental Particle Physics (CTEPP) at Universidad Andrés Bello. printed circuit board (PCB), which is the physical platform that tailors and processes the signal, and where the electronic components are installed. The signal from the PCB then enters an Arduino UNO from where we can record the data to an SD card. The Arduino is then connected to a computer, and through the Arduino IDE Software 4 , a count of the detected muons will be recorded, together with a time stamp at which each muon was detected. In our muon counter design, we require a coincidence between two detector channels to declare a valid muon event. Each detector’s analog signal is passed through a discriminator (comparator) to produce a clean logic pulse. These pulses are inputs to a fast AND gate, which outputs a logic “high” only if both inputs go high within a short time window (on the order of nanoseconds). This coincidence requirement suppresses noise and random single-detector triggers: only when the two SiMPs fire nearly simultaneously is a muon detection registered. The data is saved to a .txt file for further analysis. The components of the muon experiment are shown in Fig. 1 . Figure 1 : Components of our muon counter detector experiment. The scintillators in d) and e) are wrapped in aluminum foil and are to be placed on top of the SiPMs in f) and g) when the detector is assembled. The main detector case is shown in a) and its hexagonal casings in b) and c) will contain the SiPMs when closing the detector. The PCB is shown in h), which will be connected to the Arduino in i). The Arduino will be connected to the SD card reader in j). III The workshop Our ‘‘Niñas Atómicas” workshop has been held every Chilean winter since 2022, lasting two weeks. Girls from all regions of the country can apply online. The criteria to participate was to complete an online application 5