Delay Time Characterization on FPGA: A Low Nonlinearity, Picosecond Resolution Time-to-Digital Converter on 16-nm FPGA using Bin Sequence Calibration
Sunwoo Park, Byungkwon Park, Eunsung Kim, Jiwon Yune, Seungho Han, Seunggoo Nam · 2025
Read Delay Time Characterization on FPGA: A Low Nonlinearity, Picosecond Resolution Time-to-Digital Converter on 16-nm FPGA using Bin Sequence Calibration by Sunwoo Park, Byungkwon Park, Eunsung Kim, Jiwon Yune, Seungho Han, Seunggoo Nam (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-05583.txt.
Introduction
Sunwoo Park and colleagues build a time-to-digital converter on a standard programmable chip and reach picosecond precision. Such converters turn tiny time gaps into digital numbers, and on field-programmable chips they often suffer missing codes and uneven step sizes. The team's device sits on a 16-nanometer Xilinx chip.
Two new calibration tricks drive the gains. One rebuilds the order of time bins from test data to recover bins that would be lost. The other merges several delay lines into one chain for finer steps without averaging. The converter reached a resolution near one picosecond with low error. The authors say the tricks need no special hardware and suit many timing jobs.
Catalog record
| CREATOR | Sunwoo Park, Byungkwon Park, Eunsung Kim, Jiwon Yune, Seungho Han, Seunggoo Nam |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 31 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-05583
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Delay Time Characterization on FPGA: A Low Nonlinearity, Picosecond Resolution Time-to-Digital Converter on 16-nm FPGA using Bin Sequence Calibration Sunwoo Park, Byungkwon Park, Eunsung Kim, Jiwon Yune, Seungho Han, Seunggoo Nam Abstract We present a Time-to-Digital Converter (TDC) implemented on a 16 nm Xilinx UltraScale+ FPGA that achieves a resolution of 1.15 ps, RMS precision of 3.38 ps, a differential nonlinearity (DNL) of [–0.43, 0.24] LSB, and an integral nonlinearity (INL) of [–2.67, 0.15] LSB. This work introduces two novel hardware-independent post-processing techniques — Partial Order Reconstruction (POR) and Iterative Time-bin Interleaving (ITI) — that significantly enhance the performance of FPGA-based TDCs. POR addresses the missing code problem by inferring the partial order of each time bin through code density test data and directed acyclic graph (DAG) analysis, enabling near-complete recovery of usable bins. ITI further improves fine time resolution by merging multiple calibrated tapped delay lines (TDLs) into a single unified delay chain, achieving scalable resolution without resorting to averaging. Compared to state-of-the-art FPGA-based TDC architectures, the proposed methods deliver competitive or superior performance with reduced hardware overhead. These techniques are broadly applicable to high-resolution time measurement and precise delay calibration in programmable logic platforms. I Introduction High resolution time interval measurements are fundamental in a wide range of fields, including LiDAR systems [ 2 ] , medical imaging modalities [ 6 ] , space science [ 3 ] , nuclear and particle physics [ 22 , 1 ] , positron imaging tomography [ 16 ] quantum information processing [ 8 ] including Quantum Key Distribution (QKD) [ 9 ] , and quantum optics [ 7 ] . One method for high-resolution timing is the Time-to-Amplitude Converter (TAC) [ 15 ] , which converts a time interval into a voltage amplitude for subsequent digitization. Although TACs offer high precision and low integral nonlinearity, their measurement range is often limited, and their analog nature makes integration with digital systems less straightforward. This has led to the increasing adoption of time-to-digital converters (TDCs), which can offer compact, scalable, and fully digital timing solutions. A TDC can be constructed from a Vernier Delay Line (VDL) and a Tapped Delay Line (TDL). A TDL TDC has been the mainstream since it can easily be constructed from field-programmable gate array (FPGA) devices. However, the conventional TDL TDCs suffer from limitations in resolution, nonlinearity, and bin uniformity, particularly when constrained by clock speeds and process variation. TDCs can also be implemented in an application-specific integrated circuit (ASCI) as well as on a FPGA. An ASCI TDC typically has better resolution and nonlinearity than a FPGA TDC and has analog calibration feasibility [ 23 ] . However FPGA TDCs are more widely used in scientific research, thanks to their large flexibility, low development cost, and short development cycle. With easy access and usefulness for product developments, FPGA TDCs have been the mainstream electronics. The operating principle of a TDC is to subdivide the time axis into finer intervals beyond the resolution afforded by a high-frequency sampling clock. In modern FPGA-based systems, feasible clock frequencies are typically limited to a few hundred megahertz, corresponding to time resolutions on the order of nanoseconds. To achieve finer granularity, TDCs employ spatial delay lines that propagate an input signal through a chain of logic elements. The position of the signal along the delay line at the moment of clock arrival is sampled by discrete elements known as time bins, enabling fine time measurements. The effective length of the delay line is constrained by the clock period, and the achievable resolution improves with faster signal propagation—since identical spatial separations then correspond to smaller temporal intervals. A fundamental challenge in TDC implementation lies in the variation of delay paths among the time bins. At picosecond - level resolution, variations in signal propagation and clock skew between bins become significant. This results in time bins sampling the input at nonuniform offsets, leading to unordered bin sequences and ambiguous 0–1 transitions in the sampled thermometer code. Consequently, certain time bins may be skipped entirely, degrading both the accuracy and effective resolution of the TDC. Beyond resolution, the three key figures of merit for a TDC are: resolution, accuracy, and nonlinearity. The first two - resolution and accuracy - together characterize the system’s ability to reliably distinguish short time intervals. Several state-of-the-art techniques have been developed to improve these metrics, including the Wave Union(WU) method [ 23 , 19 ] , multi-chain averaging [ 17 ] , and the sub-TDL method [ 4 ] . The WU method injects patterned pulse trains to generate additional transitions, effectively subdividing wide time bins into finer and more uniform segments. Multi-chain averaging enhances the measurement precision and makes use of time bins across different TDLs by averaging fine time outputs from the multiple distinct TDLs. The sub TDL method strategically assign the multi-TDLs in multi-chain averaging, in a way that no time bins are missing and wasted. The third metric, nonlinearity, refers to how uniformly the time bins are distributed in the hardware implementation. Due to clock jitter and circuit-level variation, repeated single-shot measurements may map to multiple neighboring bins rather than a single bin, thereby degrading measurement fidelity. A low nonlinearity ensures a consistent fine time resolution along the entire delay line and supports reliable statistical interpretation of results. To mitigate nonlinearity, calibration methods such as bin-by-bin calibration [ 10 ] and bin-width calibration [ 10 , 5 ] are employed. Additionally, techniques like multi-phasing [ 20 , 5 ] have been proposed to reduce integral nonlinearity (INL) across the delay line, thereby improving overall performance (see Section III-C ). In order to enhance the resolution and accuracy, this work introduces two novel post-processing techniques that can be applied on any hardware. These techniques can not only advance the implementation of TDCs on FPGAs, but also offer general utility for precision digital design: 1. Partial Order Reconstruction (POR): A calibration framework capable of experimentally characterizing sub-picosecond delay variations (demonstrated up to 0.2 ps) across FPGA routing elements. POR identifies and corrects missing codes by reconstructing the correct temporal ordering of time bins. It enables fine-grained delay calibration with minimal hardware overhead and is theoretically applicable to any FPGA architecture. 2. Iterative Time-bin Interleaving (ITI): A post-calibration technique that merges multiple delay lines based on the timing information recovered via POR. ITI allows for scalable resolution enhancement and supports the construction of high-precision TDCs with arbitrarily fine bin widths. II Overall Architecture The TDC developed in this work is implemented on a 16 nm FinFET-based Xilinx UltraScale+ FPGA. An overview of the architecture is shown in Figure 1 . The implementation in this work uses only the ‘C’ taps within each CARRY8 primitive as time bins, and operates with a 250 MHz sampling clock. To capture the signal position along the delay line , a series of D flip-flops (DFFs) are arranged along the delay line to form discrete time bins. When the sampling clock hits, each DFF samples the signal’s presence, producing a thermometer code (e.g., 11110000 in an ideal case without missing codes; see Section II-A ). This thermometer code (TC) is then converted into a one-hot code (OHC) by detecting the first 1–0 transition. The