A Generalized Frankel Conjecture Via The Yang-Mills Flow

Jiangtao Li · 2025

Read A Generalized Frankel Conjecture Via The Yang-Mills Flow by Jiangtao Li (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-04003.txt.

Introduction

Jiangtao Li, writing alone, introduces a curvature condition called two-positive bisectional curvature for compact Kahler manifolds and proves a characterization theorem for manifolds that satisfy it. The result is framed as a variant of the classical Frankel conjecture and its later forms, using the Yang-Mills flow as the route.

Frankel-type results sort manifolds by positivity of curvature, linking analytic conditions to concrete shape models. By working through the Yang-Mills flow, Li obtains the stated result for this new positivity notion. The note is short, and its abstract gives the condition and conclusion without listing the model spaces, so the contribution is best read as a sorting step inside Kahler geometry.

Catalog record

CREATORJiangtao Li
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-04003

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Generalized Frankel Conjecture Via The Yang-Mills Flow Jiangtao Li Abstract . In this note, we introduce a new curvature condition called the 2 − 2- positive bisectional curvature on compact Kähler manifolds. We then deduce a characterization theorem for manifolds with 2 − 2- positive bisectional curvature, which can be regarded as a variant of the classical Frankel conjecture (cf. [ Fra61 , SY80 ] ) and its generalizations (cf. [ Siu80 , Mok88 ] ). 1. Introduction One of the landmark results in complex differential geometry is the resolution of the Frankel’s conjecture (cf. [ Fra61 ] ) by Siu and Yau: Theorem 1.1 ( [ SY80 ] ) . A compact Kähler manifold with positive bisectional curvature is biholomorphic to the complex projective space. A purely algebro-geometric generalization of the conjecture was proposed by Hartshorne (cf. [ Har70 ] ) and proved by Mori (cf. [ Mor79 ] ). This is one of the first few results in the modern study of Fano manifolds and Mori’s original technique has tremendous influence on the later development of the theory on Fano manifolds. On the differential geometric side, 1.1 has also been generalized in multiple different ways. Under the non-compact setting, it was generalized by the famous Yau’s uniformization conjecture: Conjecture 1.2 ( [ Yau88 , SY94 ] ) . A non-compact Kähler manifold with positive bisectional curvature is biholomorphic to the complex Euclidean space. The conjecture has received a lot of attention during the last decades and there has been much progress towards it by many mathematicians (see [ Ni98 , NT03 , Ni04 , CFYZ06 , Liu16 ] ). The best result so far was obtained by G. Liu, who confirmed the conjecture under the additional assumption of maximum volume growth. We refer the readers to the survey [ Liu20 ] for more details on this problem. There are also various generalizations in the compact case. For instance, Siu (cf. [ Siu80 ] ) gave a curvature characterization of complex projective spaces and smooth complex hyperquadrics using similar methods as in [ SY80 ] . Later, Mok (cf. [ Mok88 ] ) studied compact Kähler manifolds with non-negative bisectional curvature and showed that they are exactly all the compact Hermitian symmetric spaces. In addition, it was shown by Gu-Zhang (cf. [ GZ10 ] ) and Feng-Liu-Wan (cf. [ FLW17 ] ) that the Frankel’s conjecture still holds if the assumption of positive bisectional curvature is weakened to positive orthogonal bisectional curvature. In this note we give another generalization of the classical Frankel’s conjecture similar to that of Siu (cf. [ Siu80 ] ). We shall introduce a new curvature condition for compact Kähler manifolds of dimension at least 2, which we call 2- positive bisectional curvature (see Definition 2.1 ). We remark that [ Siu80 ] also defined m- positivity of bisectional curvature but it is a different curvature condition from ours. One of differences is that the m- positivity in [ Siu80 ] requires non-negativity of the bisectional curvature while ours in this paper doesn’t impose this restriction. The main theorem of this paper gives a characterization of compact Kähler manifolds with 2- positive bisectional curvature. Theorem 1.3 . Let n\geq 2 . An n dimensional compact Kähler manifold M^{n} admits a Kähler metric with 2- positive bisectional curvature if and only if (1) M^{2} is biholomorphic to a del Pezzo surface if n=2 ; (2) M^{n} is biholomorphic to either \C P^{n} or the smooth complex hyperquadric Q^{n} if n\geq 3 . As we shall see in Section 2 , (1) of 1.3 follows directly from the definition of 2- positivity and Yau’s theorem (cf. [ Yau78 ] ). The main part of the note is devoted to the proof of (2). We briefly mention the idea and key ingredients in the proof here. Firstly, by a classical result in algebraic geometry on the pseudoindex of Fano manifolds (cf. [ Miy04 , DH17 ] ), the statement is equivalent to an estimate on the minimal anti-canonical degree of rational curves on M^{n} . To establish the desired estimate, we consider the Yang-Mills flow on the Riemann sphere \C P^{1} . The long time existence and convergence are well known due to existing theory on the Yang-Mills flow on Riemann surfaces (cf. [ Don85 , Das92 , Rd92 ] ). The key will be Corollary 3.5 , a maximum principle for the Yang-Mills flow, which follows from Hamilton’s tensor maximum principle 3.4 . The Hamilton’s maximum principle is well known and used widely in the applications of the Ricci flow. However, it seems never appearing in the Yang-Mills setting. The paper is organized as follows: In Section 2 , we define the curvature condition of 2- positive bisectional curvature and construct such metrics on del Pezzo surfaces and smooth complex hyperquadrics. In Section 3 , we give a review of the fundamental results on the Yang-Mills flow on Riemann surfaces, which will be used in the proof of the main theorem. Afterwards, we establish the key maximum principle Corollary 3.5 . In Section 4 , we complete the proof of the main theorem. Finally, we discuss some related questions and also relevant works by others in the last section. 2. 2 -positive bisectional curvature Let (M,g) be an n dimensional compact Käher manifold. Let TM be the holomorphic tangent bundle of M . At any point x\in M , we fix any holomorphic tangent vector U\in T_{x}M . Then R(U,\bar{U}) is a Hermitian operator on T_{x}M and thus diagonalizable with real eigenvalues \lambda_{1}(x,U)\leq\cdots\leq\lambda_{n}(x,U). We introduce a new notion of positivity for bisectional curvatures which we call 2- positive bisectional curvature: Definition 2.1 ( 2 -positive bisectional curvature) . (M,g) has 2 -positive bisectional curvature if \lambda_{1}(x,U)+\lambda_{2}(x,U)>0 for any x\in M and any U\in T_{x}M . We give some examples of compact Kähler manifolds with 2 -positive bisectional curvature. Observe that when n=2 , 2 -positivity of bisectional curvature is equivalent to the positivity of Ricci curvature. Therefore, by Yau’s resolution of the Calabi conjecture (cf. [ Yau78 ] ), all Fano surfaces, namely, del Pezzo surfaces, admit Kähler metrics with 2 -positive bisectional curvature. When n>2 , it is well known that the Fubini-Study metric on the complex projective space has positive bisectional curvature and in particular has 2 -positive bisectional curvature. Next we give another example of compact Kähler manifolds with positive 2 -positive bisectional curvature. Indeed, as shown in the main theorem, these are the only manifolds with 2- positive bisectional curvature in higher dimensions. Recall that a complex hyperquadric is the following nonsingular hypersurface in \C P^{n+1} : Q^{n}=\left\{[X_{0}:\cdots:X_{n+1}]\in\C P^{n+1}:X_{0}^{2}+\cdots+X_{n+1}^{2}=0\right\}\subseteq\C P^{n+1}. Note that Q^{n} can be regarded compact Hermitian symmetric space. In fact, we have (2.1) Q^{n}\cong\frac{\SO(n+2,\R)}{\SO(n,\R)\times\SO(2,\R)}. We will calculate the bisectional curvature of Q^{n} equipped with the Hermitian symmetric metric and show that it also has 2 -positive bisectional curvature. This was carried out in [ Siu80 ] using the duality between compact and non-compact Hermitian manifolds. Here we give a more direct computation. The basic geometric theory of Riemannian symmetric spaces is needed. For this, we refer readers to the standard texts, e.g. [ Wol11 , Chapter 8] , [ Hel78

Read the complete text