Quantum Error Correction-like Noise Mitigation for Wave-like Dark Matter Searches with Quantum Sensors

Hajime Fukuda, Takeo Moroi, Thanaporn Sichanugrist · 2025

Read Quantum Error Correction-like Noise Mitigation for Wave-like Dark Matter Searches with Quantum Sensors by Hajime Fukuda, Takeo Moroi, Thanaporn Sichanugrist (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-03253.txt.

Introduction

Hajime Fukuda, Takeo Moroi, and Thanaporn Sichanugrist suggest borrowing an error control trick to sharpen hunts for wave-like dark matter. Quantum sensors looking for that faint, wavy signal lose ground to noise that points the same way as the signal itself. Their plan links several sensors so noise in each one can be checked against the others, much like error correction in quantum computing.

For small sensor counts, the gain grows with the square root of the number used. With enough sensors, the setup matches the best limit set by ideal measuring, a bar that plain unlinked sensors cannot reach here because the wave phase is unknown. The idea fits many sensor kinds, including arrays of tuned cavities. It could widen the reach of future dark matter searches.

Catalog record

CREATORHajime Fukuda, Takeo Moroi, Thanaporn Sichanugrist
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE38 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-03253

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Quantum Error Correction-like Noise Mitigation for Wave-like Dark Matter Searches with Quantum Sensors Preprint: XXXX Hajime Fukuda, Takeo Moroi, Thanaporn Sichanugrist Abstract We propose a quantum error correction-like noise mitigation protocol for enhancing the sensitivity of wave-like dark matter searches with quantum sensors. Our protocol uses multiple sensors to mitigate the noise affecting each sensor individually, allowing for the suppression of excitation noise that is parallel to the dark matter signal. We demonstrate that our protocol can improve the sensitivity to dark matter signals by a factor of N \sqrt{N} , where N N is the number of sensors used. Furthermore, we find that our protocol achieves the same performance as the standard quantum limit by the ideal measurement, which is impossible to achieve due to the unknown phase of the dark matter field. Our work can be widely applied to various types of signals with unknown phases, and has the potential to enhance the sensitivity of quantum sensors such as arrays of resonant cavities. Introduction — The dark matter (DM) in the universe is one of the most important mysteries in modern physics. There are various candidates for DM, and one of the well-motivated candidates is light bosonic particles such as axions 36 ; 2 , which is called “wave-like DM” due to its wave nature. Recently, with the development of quantum technologies, growing attention has been paid to the use of quantum sensors for searching for wave-like DM 17 ; 9 ; 10 ; 27 ; 13 ; 11 ; 5 ; 12 ; 14 ; 18 ; 8 ; 37 ; 30 ; 4 ; 3 . One of the important issues in using quantum sensors is the effect of noise; although noises perpendicular to the DM signal can be reduced by entangled sensors, noises parallel to the DM signal, which we call “excitation noise”, cannot be reduced by such methods and especially problematic 7 ; 28 ; 20 ; 1 ; 6 . Classically, excitation noise can be suppressed by employing multiple sensors and analyzing their correlations, since the excitation noise at each sensor is independent while the DM signal is correlated. This naturally raises the question of whether we can do the similar analysis for quantum sensors, assuming that the excitation noise at each sensor is independent. Refs. 33 ; 8 ; 22 have proposed to measure sensors with entangled states such as W states 19 , the equal superposition of single-excitation states across multiple sensors, to achieve this goal. Nevertheless, as discussed in Ref. 8 , this procedure needs the presence of other noises, such as de-excitation noises. It seems counterintuitive that the protocol in Ref. 8 cannot reduce the excitation noise at all if there is no other noise. The underlying reason is that, when excitation noise is dominant, it can lead to multiple sensors being excited simultaneously — events that the W -state measurement cannot distinguish. In this letter, we explore the possibility of processing sensor states during measurements to avoid this restriction. The crucial insight is that sensor states after noise effects occupy a subspace nearly orthogonal to the “code space”, the space spanned by the W state and the ground state. By designing a sensing protocol inspired by quantum error correction (QEC) techniques 28 ; 20 ; 1 , which pulls erroneous states back into the original code space repeatedly, we demonstrate that excitation noise can be mitigated even in the absence of other noise. As a result, the sensitivity to the DM signal is enhanced by a factor of \sqrt{N} with N sensors, and the uncertainty scales as 1/N . Although we find that the QEC-like protocol can mitigate the excitation noise and the uncertainty scales with 1/N , we do not claim that our protocol is beyond the standard quantum limit (SQL) 24 . Rather, we find that by our protocol, the sensitivity to the DM signal may reach the SQL by the ideal measurement if the number of sensors is sufficiently large. This is consistent with the generic theorem that the QEC-assisted metrology cannot beat the SQL when the noise and the signal Hamiltonian are parallel 32 ; 16 ; 38 . Nonetheless, we emphasize that our protocol is useful in the context of DM searches with quantum sensors; DM signals are not coherent over long time scales, and thus, in practical situations, one cannot repeat the ideal measurements over long times. DM Search with Quantum Sensors — Let us first summarize our setup for DM searches with quantum sensors. We consider N quantum sensors, each of which is modeled as a two-level system with ground state \ket{0}_{i} and excited state \ket{1}_{i} for the i -th sensor; see App. A for definitions of states used in this letter. Note that multi-level systems such as resonant cavities can be treated in the same framework by focusing on two relevant energy levels 23 . The energy difference between the two states is denoted as \omega_{0} , so that the Hamiltonian of the i -th sensor is given by H_{i}=-(\omega_{0}/2)\sigma_{i}^{z} , where \sigma_{i}^{a} ( a=x,y,z ) are the Pauli operators acting on the i -th sensor. On the other hand, the DM field is modeled as a classical oscillating field with frequency m . The interaction between the DM field and the sensors is described by the Hamiltonian H_{\rm int}=\epsilon\cos(m t + \varphi)\sum_{i=1}^{N}\sigma_{i}^{x} , where \epsilon is a small coupling constant and \varphi is an unknown phase. DM field is assumed to be coherent over a time scale \tau_{\text{DM}}\sim 2\pi/(mv^{2}) , where v\sim 10^{-3} is the typical velocity of DM particles in our galaxy, so that \varphi can be treated as a constant during the time scale \tau_{\text{DM}} but changes randomly for longer time scales. The same conclusion holds if we treat the DM field as a classical stochastic field 21 ; 23 . To detect the DM signal, we start from the initial state \ket{\psi_{\rm init}}=\bigotimes_{i=1}^{N}\ket{0}_{i} and let the system evolve under the total Hamiltonian H=\sum_{i=1}^{N}H_{i}+H_{\rm int} for a time duration \tau\lesssim 2\pi/(mv^{2}) . We move to the interaction picture with respect to \sum_{i=1}^{N}H_{i} assuming that |\omega_{0}-m|\tau\ll 1 so that we can apply the rotating wave approximation (RWA) and neglect the rapidly oscillating terms. Then, the effective Hamiltonian in the interaction picture is given by \displaystyle H_{I}=\epsilon\sum_{i=1}^{N}\quantity( \sigma_i^x \cos\varphi- \sigma_i^y \sin\varphi). (1) In addition to the DM signal, we take into account the effect of environmental noise. For simplicity, we focus on the Markovian noises described by the Lindblad master equation 29 ; 25 . In this letter, we consider the bit-flip noise for individual sensors in the interaction picture, which is described by the Lindblad operators L_{i}=\sigma_{i}^{x} for i=1,2,\ldots,N . The time evolution of the density matrix \rho in the interaction picture is then given by \displaystyle\frac{d\rho}{dt} \displaystyle=\mathcal{L}[\rho]\equiv-i[H_{I},\rho]+\gamma\sum_{i=1}^{N}D_{i}[\rho], (2) \displaystyle D_{i}[\rho] \displaystyle\equiv\frac{1}{2}\quantity( \sigma_i^x \rho\sigma_i^x - \rho), (3) where \gamma is the bit-flip rate and assumed to be the same for all sensors. Since we are interested in the situation where the noise is stronger than the signal, we assume \gamma\gg|\epsilon| and \gamma\tau\lesssim 1 in this letter. Even if we restrict ourselves to individual noises, i.e., noises acting on each sensor independently, there are other types of noise such

Read the complete text