Routes for light management in monolithic perovskite/silicon tandem solar cells
Michel G. Rocha, Emiliano R. Martins · 2025
Read Routes for light management in monolithic perovskite/silicon tandem solar cells by Michel G. Rocha, Emiliano R. Martins (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-02548.txt.
Introduction
Michel Gaglioni Rocha and Emiliano Rezende Martins untangle how surface texture helps and hurts the most promising design in solar energy. Perovskite-on-silicon tandem cells stack two absorbers to catch more of the spectrum, and texturing the surfaces traps light better, but texturing the perovskite layer itself tends to raise electrical losses. Using optical simulations, the authors separate the jobs done by the texture at the front of the device from the texture at the rear.
That separation suggests a new architecture: keep the useful textures and leave the perovskite flat. The proposed structure matched the light management of fully textured devices in simulation, while its planar perovskite should cut electrical losses. If the texture-related voltage loss can be held near fifty millivolts, roughly six times lower than in fully textured cells, the simpler design wins on efficiency as well.
Catalog record
| CREATOR | Michel G. Rocha, Emiliano R. Martins |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 18 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-02548
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Routes for light management in monolithic perovskite/silicon tandem solar cells Michel G. Rocha, Emiliano R. Martins Abstract Fully-textured perovskite/silicon tandem solar cells have emerged as promising candidates for next-generation photovoltaics. The optical functions of full texturing, however, are not yet fully understood. A key challenge is the requirement for perovskite layer texturing, which often leads to increased electrical losses. Here, we elucidate the distinct optical roles of front and rear textures in tandem configurations using optical simulations and use these insights to propose a new architecture that eliminates the need for perovskite surface texturing. We demonstrate that our proposed structure achieves optical results comparable to those of fully-textured devices, while its planar perovskite layer has the potential to reduce electrical losses. The high optical performance also results in higher efficiency if a texture-induced voltage loss as low as 50 mV is assumed, which is about six times lower than the loss of fully-textured devices, thus enabling higher efficiencies within a simplified design. Our results show that perovskite texturing is not essential for optimal light management, thus opening the way to combine efficient light management with high electrical performance. I Introduction As the efficiency of single-junction silicon solar cells approaches its theoretical limit [ 1 ] ( \sim 30% [ 2 ] ), increasing attention has turned to tandem solar cells (TSCs), which combine materials with distinct band gaps within a single device. Certified power conversion efficiencies (PCEs) of up to 34.6% have already been demonstrated [ 3 ] , and their theoretical limits can be as high as 45.2% [ 4 , 5 ] . Tandems based on a perovskite top cell and a silicon bottom cell hold great promise for low-cost, high-efficiency devices. Perovskites exhibit tunable band gaps [ 6 ] , strong absorptance in the visible and near-UV spectrum [ 7 ] , and carrier diffusion lengths exceeding their absorption depth [ 8 , 9 ] . Perovskite materials are also inexpensive and composed of earth-abundant elements [ 10 ] . When combined with the low band gap of silicon, they enable broad-band light harvesting at low manufacturing costs [ 11 ] . Achieving high PCEs in TSCs, however, requires effective light management to direct the appropriate portions of the solar spectrum to each sub-cell [ 12 ] , enhancing absorptance [ 13 , 14 ] and minimizing reflection losses [ 15 , 16 ] . This can be accomplished through photonic structures placed at intermediate interfaces [ 13 , 17 , 18 , 19 ] or via optical impedance matching layers [ 20 ] . Various light-trapping and anti-reflection strategies have been proposed for perovskite/silicon tandem solar cells (PSTSCs), such as Mie-resonance-based spectral splitting [ 21 ] , nanosphere [ 22 ] and nanohole-array [ 23 ] diffractive structures, planar black silicon textures [ 24 ] , and light management foils [ 25 ] . Among these, pyramidal texturing has emerged as a particularly effective solution, providing efficient light trapping and reducing reflectance [ 26 , 27 , 28 , 29 , 30 , 31 ] . The impressive optical gains achieved through pyramidal texturing in single-junction silicon cells have inspired extensive research on textured PSTSCs [ 32 , 33 , 34 , 35 , 36 , 37 , 38 ] . However, these textures introduce additional surface area and fabrication complexity, often resulting in elevated electrical losses that offset optical improvements [ 5 , 32 , 39 , 40 ] . Consequently, the experimental efficiencies remain significantly lower than the theoretical predictions [ 26 , 27 , 28 , 4 ] . Fully-textured PSTSCs — such as the structure illustrated in Figure 1 (a) — have emerged as the most promising architecture for light management, with reported PCEs among the highest to date [ 41 , 38 , 37 , 30 ] . The roles of anti-reflection and light trapping in such structures, however, are not yet fully understood. Moreover, there are significant challenges associated with full texturization, particularly regarding conformal deposition over steep textures and the resulting non-radiative recombination losses in the perovskite layer [ 42 , 40 ] , which can exceed 300 mV [ 5 ] . In particular, the benefit of texturing the perovskite interface remains controversial, as electrical losses may counteract the optical gains [ 39 ] . Furthermore, planar perovskite layers are increasingly regarded as a more reliable pathway toward scalable, high-quality, large-area cells [ 43 , 44 ] . Here, we elucidate the optical role of pyramidal texturing in PSTSCs and show that effective light management can be achieved without perovskite texturing. We then use these insights to propose a simplified architecture that achieves comparable optical performance without requiring perovskite texturing. We show that the proposed design can outperform the efficiency of fully-textured PSTSCs when texture-induced voltage losses as low as 50 mV are assumed, which is at least six times lower than losses reported in the literature [ 5 ] . Our results show that perovskite texturing is not essential for optimum light management, thus opening the way for tandem cells with efficient light management and high electrical performance. II Structures, Parameters and Methods To elucidate the roles played by full texturing, we consider the tandem solar cell of Figure 1 (a), which is representative of fully-textured cells [ 5 , 32 , 36 , 29 ] . A planar stack, shown in Figure 1 (b), is also considered as a reference. The optical simulations are based on Rayflare [ 45 ] , which employs a multimodal approach to model optical structures combining geometric and wave optics. The pyramidal textures in Figure 1 are modeled using a Phong scattering profile, which accounts for surface roughness and diffuse reflection [ 46 ] . The electrical properties of the cells are modeled by a two-diode equivalent circuit through Solcore [ 47 ] . We assume typical values for saturation currents J_{0_{1}} and J_{0_{2}} , ideality factors n_{1} and n_{2} , series resistance R_{\mathrm{s}} and shunt resistance R_{\mathrm{sh}} [ 48 , 49 , 50 ] , as summarized in Table I . Fig. 1: Tandem cell architectures used for optical benchmarking: (a) fully-textured, state-of-the-art configuration; (b) planar reference. The short-circuit current density ( J_{\mathrm{sc}} ) of each subcell is calculated according to Eq. 1 , where \phi_{\mathrm{AM1.5G}} is the AM1.5G solar spectrum, f_{\mathrm{c}} is the collection efficiency of photogenerated carriers and A(\lambda) is the spectral absorptance. The collection efficiency for perovskite is determined using Eqs. 2 and 3 [ 12 ] , where k is the Boltzmann constant, T is the device operating temperature (298 K), W is the layer thickness, L_{\mathrm{d}} is the minority carrier diffusion length (assumed to be 1 \mu m [ 8 ] ), and V bi is the built-in voltage, assumed equal to the perovskite band gap. The refractive indices of all materials are extracted from Refs. [ 51 , 52 , 53 ] (see Supplementary Information I, Figure S1). The optical data for the perovskite layer assumes a Cs 0.17 FA 0.83 Pb(I 0.83 Br 0.17 ) 3 composition [ 53 ] , with a band gap of 1.63 eV. J_{\mathrm{sc}}=f_{c}q\int_{320\,\mathrm{nm}}^{1200\,\mathrm{nm}}\phi_{\mathrm{AM1.5G}}(\lambda)A(\lambda)\,d\lambda (1) f_{c}=\frac{e^{\lambda_{2}^{0}/2}-1}{\lambda_{2}^{0}/2} (2) \lambda_{2}^{0}=\frac{qV_{\mathrm{bi}}}{2kT}-\sqrt{\left(\frac{W}{L_{d}}\right)^{2}+\left(\frac{qV_{\mathrm{bi}}}{2kT}\right)^{2}} (3) These parameters are then used to obtain the J