Rydberg Single Photon Detection for Probing 0.1–10 meV Dark Matter with BREAD

Abhishek Banerjee ID, Reza Ebadi ID, Surjeet Rajendran ID · 2025

Read Rydberg Single Photon Detection for Probing 0.1–10 meV Dark Matter with BREAD by Abhishek Banerjee ID, Reza Ebadi ID, Surjeet Rajendran ID (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-00145.txt.

Introduction

Abhishek Banerjee, Reza Ebadi, and Surjeet Rajendran propose a Rydberg-atom single photon detector for dark matter in the sub to ten millielectronvolt mass range, paired with the BREAD dish antenna experiment. Photons produced and focused by the dish are absorbed by Rydberg atoms and traded for free electrons that are easy to detect. At lower masses, photons drive transitions between Rydberg states, read out by selective ionization.

At higher masses, photons ionize the Rydberg atoms directly. Particle astrophysics readers get a detector design covering a wide, hard frequency band. Single photon sensitivity at these energies could open a dark matter window that conventional electronics cannot reach.

Catalog record

CREATORAbhishek Banerjee ID, Reza Ebadi ID, Surjeet Rajendran ID
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE43 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-00145

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Rydberg Single Photon Detection for Probing 0.1–10 meV Dark Matter with BREAD Abhishek Banerjee ID, Reza Ebadi ID, Surjeet Rajendran ID Abstract We introduce a Rydberg–based single photon detector (SPD) for probing dark matter in the 0.1–10 meV mass range (20 GHz–2 THz). The Rydberg SPD absorbs photons produced and focused by the BREAD dish antenna and trades them for free, detectable electrons. At the lower end of the mass range, photons drive Rydberg–Rydberg transitions, which are read out via state-selective ionization. At higher masses, they directly ionize the Rydberg atoms. Light bosonic dark matter candidates (e.g. axion, CP-even scalars, and dark photon) are well described as coherent classical fields Kolb and Turner 2019 ; Cheong et al. 2025 . Through their coupling to electromagnetism, a small fraction of the background dark matter (DM) converts into coherent photons. The non-relativistic nature of DM implies that the photon frequencies are narrowly distributed around the dark matter mass \omega\simeq m_{\rm DM} . Numerous existing and proposed experiments are designed to search for such DM–induced ac electromagnetic signal Adams et al. 2022 ; Sushkov 2023 . Figure 1: Schematic of the Rydberg SPD setup. (a) BREAD uses a parabolic reflector to focus photons emitted perpendicular to the barrel surface onto a focal point, increasing the photon intensity at the focus. (b) A Rydberg beam is prepared by exciting electrons to a high principal quantum number. When the photon energy exceeds the ionization threshold \omega>I_{n} the photons directly ionize the Rydberg atoms, producing detectable free electrons. (c) The target photon energy matches the transition energy between Rydberg states, \omega=\omega_{n} . During the sensing stage, the Rydberg beam is exposed to photons from the BREAD setup. Downstream, the Rydberg state is read out using selective field ionization (SFI). In SFI, an external electric field is scanned across the ionization threshold of the relevant states, and the resulting ionization is detected. The Broadband Reflector Experiment for Axion Detection (BREAD) employs a dish antenna with a parabolic reflector to focus photons generated by DM interactions onto a focal point Liu et al. 2022 . BREAD is a modular broadband signal-enhancement platform that must be supplemented with a high-precision readout module. Developing efficient detectors continues to be an active area of research. A key focus is the development of single photon detectors (SPDs), as photon-counting is expected to achieve higher sensitivity in the low-signal regime compared to bolometric detection Sushkov 2023 . SPDs at optical and infrared frequencies are mature technologies Hadfield 2009 . However, efficient single photon detection in the THz range remains challenging Todorov et al. 2024 . Photons in this frequency range carry energies on the meV scale, far lower than the eV-scale energies of optical photons. Thus, well-established optical SPDs lack sensitivity in this range. Addressing this challenge requires development of new detection technologies. The search for meV-scale dark matter has recently driven further development of THz SPDs Fan et al. 2025 . Graham et al. proposed a Rydberg-based SPD for the HAYSTAC experiment to probe DM in the 40–200 {\rm\mu eV} mass range (10–50 GHz) Graham et al. 2024 . In this setup, DM–induced photons drive transitions between Rydberg states, and the resulting state population is read out via selective field ionization (SFI). Inspired by this approach, we introduce a Rydberg-atom–based SPD operating in the 20 GHz–2 THz range as a complementary component of the BREAD experiment. Rydberg electronic energy levels span this frequency range, and their large dipole coupling enhances photon absorption efficiency. A photon absorbed by a Rydberg atom can either directly ionize it or excite it to a higher Rydberg state (detectable via state-selective field ionization); see Fig. 1 . One of our proposed detection schemes (Rydberg transitions induced by photons followed by state readout via SFI) is similar to that in Ref. Graham et al. 2024 . However, our approach differs in several key aspects. First, the direct ionization scheme we introduce is entirely new and enables sensitivity to DM masses substantially higher than those accessible through transition-based methods. Second, while Ref. Graham et al. 2024 considers a microwave cavity setup with separate cavities for signal buildup and detection, our design employs the broadband reflector configuration of BREAD. This setup is considerably simpler, as it removes the need for frequency scanning and allows searches at higher frequencies using Rydberg ionization, since the signal strength is no longer limited by the cavity size. Photons from dark matter.— We focus on two specific DM candidates: the axion and the dark photon. The relevant electromagnetic interaction Lagrangian takes the form \mathcal{L}\supset-g_{a\gamma\gamma}aF\tilde{F}/4=g_{a\gamma\gamma}a\mathbf{E}\cdot\mathbf{B} for the axion, and \mathcal{L}\supset\varepsilon FF^{\prime}/2 for the dark photon. Here, a is the pseudoscalar axion field, g_{a\gamma\gamma} the axion–photon coupling, \varepsilon the dimensionless dark photon–photon mixing parameter, F the electromagnetic field strength, and F^{\prime} the dark photon field strength. When a large bias magnetic field \mathbf{B}_{0} is applied, ambient axion DM produces an oscillating electric field with amplitude E_{\rm a}\sim g_{a\gamma\gamma}B_{0}\sqrt{\rho_{\rm DM}}/m_{\rm DM} . For the dark photon, the mixing automatically produces a similar oscillating electric field E_{A^{\prime}}\sim\varepsilon\sqrt{\rho_{\rm DM}} where \rho_{\rm DM} denotes the local DM energy density. Coherent detection of the ac electric field is linearly sensitive to the couplings and has been proposed for DM detection using electro-optics Ebadi et al. 2024 . In the mass range of interest for this work, however, the photon production by BREAD occurs incoherently. For m_{\rm DM}\gtrsim 0.1\,{\rm meV} , the DM de Broglie wavelength is smaller than the size of the BREAD setup Liu et al. 2022 . As a result, photons emitted from different parts of the barrel surface are out of phase, producing an incoherent signal. We will therefore focus on single photon detection, which has quadratic sensitivity to the couplings. While the standard quantum limit sets the fundamental limit for coherent detection, the dark count rate (DCR) is the primary figure of merit for SPDs. The BREAD setup will have a dish area of A_{\rm dish}\sim 10\,{\rm m}^{2} . The focus area A_{\rm focus} is smeared out compared to an ideal point due to the momentum spread of the emitted photons, inherited from the momentum spread of the DM. With a typical momentum spread of \Delta p_{\rm DM}/m_{\rm DM}\sim 10^{-3} and a physical BREAD setup size of about a meter, the resulting focus area is estimated as A_{\rm focus}\sim\pi\,{\rm mm}^{2} Liu et al. 2022 . Note that the photon field amplitude at the focal point is enhanced by a factor of \sqrt{A_{\rm dish}/A_{\rm focus}}\sim\mathcal{O}(10^{3}) relative to its value away from the focus. We compute the signal photon rate by estimating the emitted power P_{\rm DM}=E_{\rm DM}^{2}A_{\rm dish}/2 where A_{\rm dish} is the effective emission area. The corresponding photon rate is R_{\rm DM}=P_{\rm DM}/m_{\rm DM} . Therefore, the expected signal photon rates are R_{a}\simeq g_{a\gamma\gamma}^{2}B_{0}^{2}\rho_{\rm DM}A_{\rm dish}/2m_{a}^{3} and R_{A^{\prime}}\simeq\varepsilon^{2}\rho_{\rm DM}A_{\rm dish}/2m_{A^{\prime}} . For fixed external parameters B_{0}=10~\mathrm{T} , \rho_{\mathrm{DM}}=0.45~\mathrm{GeV/cm^{3}} , and A_{\mathrm{dish}}=10~\mathrm{m^{2}} , these expressions provide numerical estimates of the photon rates as a function of couplings and masses Liu et al. 2022 : \displaystyle R_{a} \displaystyle\simeq 0.55~\mathrm{Hz}\bigg(\frac{g_{a\gamma\gamma}}{10^{-11}~\mathrm{GeV^{-1}}}\bigg)^{2}\bigg(\frac{m_{a}}{\mathrm{meV}}\bigg)^{-3}, \displaystyle R_{A^{\prime}} \displaystyle\simeq 0.14~\mathrm{Hz}\bigg(\frac{\varepsilon}{10^{-14}}\bigg)^{2}\bigg(\frac{m_{A^{\prime}}}{\mathinner{\mathrm{meV}}}\bigg)^{-1}. DM–photon conversion can be further enhanced by introducing a stack of N_{l} dielectric layers, which effectively increases the number of conversion surfaces Jaeckel and Redondo 2013 ;

Read the complete text