D. Agguiaro

24 · 2025

Read D. Agguiaro by 24 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-27592.txt.

Introduction

D. Agguiaro and 290 co-authors describe how the ALICE Inner Tracking System is tuned and watched during LHC Run 3 in 2025. ALICE studies collisions at the Large Hadron Collider. Its inner tracker uses silicon pixel chips to trace charged paths close to the collision point, with finer aim and faster readout than the prior device.

Stable runs need each sensor's charge threshold set and noisy pixels masked. The full device holds more than twenty-four thousand sensors and billions of pixels across about ten square meters. That scale makes tuning a major task in its own right. The paper sets out the steps used to keep data clean through the run.

Catalog record

CREATOR24
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE78 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-27592

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

D. Agguiaro 24 Abstract The new Inner Tracking System (ITS2) of the ALICE experiment began operation in 2021 with the start of LHC Run 3. Compared to its predecessor, ITS2 offers substantial improvements in pointing resolution, tracking efficiency at low transverse momenta, and readout-rate capabilities. The detector employs silicon Monolithic Active Pixel Sensors (MAPS) featuring a pixel size of 26.88 × \times 29.24 μ \upmu m 2 and an intrinsic spatial resolution of approximately 5 μ \upmu m. With a remarkably low material budget of 0.36% of radiation length ( X 0 X_{0} ) per layer in the three innermost layers and a total sensitive area of about 10 m 2 , the ITS2 constitutes the largest-scale application of MAPS technology in a high-energy physics experiment and the first of its kind operated at the LHC. For stable data taking, it is crucial to calibrate different parameters of the detector, such as in-pixel charge thresholds and the masking of noisy pixels. The calibration of 24120 monolithic sensors, comprising a total of 12.6 × \times 10 9 pixels, represents a major operational challenge. This paper presents the methods developed for the calibration of the ITS2 and outlines the strategies for monitoring and dynamically adjusting the detector’s key performance parameters over time. \ShortTitle Calibration and monitoring of the ALICE ITS2 in Run 3 \Collaboration ALICE ITS Collaboration \ShortAuthor ALICE ITS Collaboration 1 Introduction The Inner Tracking System (ITS) of the ALICE experiment has been replaced in 2021 by a completely new detector, called ITS2, to fully exploit the luminosity of the CERN Large Hadron Collider (LHC) during Runs 3 and 4. The installation of the new detector was also made possible by the installation of a new beam pipe, featuring a central beryllium section with an outer radius reduced from 28 mm to 18 mm [ 1 ] . The new tracker is composed of seven cylindrical and concentric layers equipped with 24120 silicon Monolithic Active Pixel Sensors (MAPS) called ALPIDE [ 1 , 2 ] , covering a total active area of about 10 m 2 . It has a low material budget of 0.36% X_{0} /layer in the innermost layers, and it significantly enhances the charged-particle pointing resolution and standalone tracking efficiency down to very low transverse momenta compared to the previous tracker [ 3 , 1 ] . The sensor (hereafter called chip ), produced by TowerJazz [ 4 ] with the 0.18 \upmu m CMOS imaging process technology, features a pixel size of 26.88 \times 29.24 \upmu m 2 with a total of 512 \times 1024 pixels distributed over 15 \times 30 mm 2 . This translates into a total number of 12.6 billion pixels in the full detector. The sensor features a binary readout, with the signal discriminated in-pixel. The detector is divided into an Inner Barrel (IB), with three layers, and an Outer Barrel (OB) with four layers (two Middle Layers, ML, and two Outer Layers, OL), and it is segmented into 192 Staves with a maximum length of about 148 cm (OL staves). Each IB stave is formed by 9 chips with independent high-speed data links with 1.2 Gb/s bandwidth each. The power to the chips is supplied directly through a Flexible Printed Circuit (FPC) wire-bonded to the sensors. For the OB staves, a single high-speed data link at 400 Mb/s allows the readout of groups of 7 chips each. The power supply is provided through external power and bias buses soldered to the FPCs. See Fig. 23 and 24 of Ref. [ 1 ] for more details. The Hybrid Integrated Circuit (HIC), also called the module , comprises the group of chips interconnected by data links: one group for the IB and two groups for the OB. There are no other active components than the ALPIDE chips mounted on the detector staves. The detector barrels are cooled using a water cooling system that operates at sub-atmospheric pressure with a constant water flow and temperature. The readout of the detector can be either triggered or continuous. In the continuous mode, equally spaced triggers are continuously sent to the sensors, and the data are recorded for the full duration of the readout window. The trigger frequency, also called framing rate in the following, generally varies between 11 and 202 kHz. In the triggered mode, randomly distributed physics triggers are sent to the sensors from the ALICE Central Trigger Processor (CTP) [ 5 ] , limiting the readout to specific events. The power and reverse bias voltages needed to operate the chips are provided by external, custom Power Boards (PBs). The PBs are the last stage of active regulation and are connected via approximately 7 m long cables to the detector. The resulting voltage drops have to be compensated for at the level of the PB. On IB staves, the return paths for analogue and digital domains are separated. On OB staves, the analogue and digital power domains of all modules instead share the same return path (digital and analogue grounds are connected at the level of the power bus on the stave), leading to a more complex interplay of the modules. The voltage drop is compensated using an iterative procedure that begins with an initial output voltage of 1.8 V at the PB, taking into account the known resistance of the power cables. In each iteration, the digital and analogue currents are read from the PB, the corresponding voltage drop across the cables is calculated, and this drop is added to the 1.8 V reference. This results in an increased PB output voltage for the next iteration. It was found that four iterations are sufficient to regulate the voltage on the chips with a precision of \pm 35 mV around the target value of 1.8 V. The voltage drop on the HICs is negligible compared to that introduced by the long power cables. Voltage stability at the chip level is ensured by several decoupling capacitors mounted close to the chips. With the ITS2 powering scheme, voltage drop compensation is applied individually to each stave in the IB and to each HIC in the OB. Typical supply voltages at the PB range from 1.9 to 2.1 V, or 2.1 to 2.3 V for analogue and digital domains, respectively, depending on the stave. The large number of channels and the complex power distribution scheme make the monitoring and calibration of the detector a crucial and challenging task to be performed before recording physics data to ensure stable data taking. The detector calibration consists of tuning the in-pixel thresholds to a target value at which the sensors are fully efficient while maintaining a low fake-hit rate, and of masking noisy pixels. The thresholds of the pixels are tunable chip by chip, and they are typically set in the range between 100 and 150 e^{-} . With thresholds in this range and for Minimum-Ionizing Particles (MIP), test beam results show that the sensors achieve an intrinsic spatial resolution of 5 \upmu m, an average cluster size ranging between 2 and 3 pixels, and a detection efficiency above 99%, with a fake-hit rate below 10 -6 hits/event/pixel when only a negligible number of pixels are masked [ 1 ] . This

Read the complete text