Position-space sampling for local multiquark operators in lattice QCD using distillation and the importance of tetraquark operators for T c ​ c ​ ( 3875 ) + T_{cc}(3875)^{+} Preprint: [HU-EP-25/35-RTG, DESY-25-140]

Andres Stump, Jeremy R. Green · 2025

Read Position-space sampling for local multiquark operators in lattice QCD using distillation and the importance of tetraquark operators for T c ​ c ​ ( 3875 ) + T_{cc}(3875)^{+} Preprint: [HU-EP-25/35-RTG, DESY-25-140] by Andres Stump, Jeremy R. Green (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-26459.txt.

Introduction

Andres Stump and Jeremy R Green speed up a key step in lattice quantum chromodynamics, the grid-based study of the strong force. Spectroscopy there means computing how particles pass signals between two points, which needs repeated costly solving. A method called distillation trims the work by using a few key patterns of the grid, but local operators with four or more quarks get very costly in it.

Stump and Green add position-space sampling: they project momentum only over sparse grids of points instead of the whole lattice. The estimator stays unbiased, and they show it works for single mesons, single baryons, and local four-quark operators. Applied to a known particle state, adding local four-quark operators shifted several energy levels a lot. Those shifts in turn moved the scattering results drawn from them.

Catalog record

CREATORAndres Stump, Jeremy R. Green
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE64 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-26459

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Position-space sampling for local multiquark operators in lattice QCD using distillation and the importance of tetraquark operators for T c ​ c ​ ( 3875 ) + T_{cc}(3875)^{+} Preprint: [HU-EP-25/35-RTG, DESY-25-140] Andres Stump, Jeremy R. Green Abstract Obtaining hadronic two-point functions is a central step in spectroscopy calculations in lattice QCD. This requires solving the Dirac equation repeatedly, which is computationally demanding. The distillation method addresses this difficulty by using the lowest eigenvectors of the spatial Laplacian to construct a subspace in which the Dirac operator can be fully inverted. This approach is efficient for nonlocal operators such as meson-meson and baryon-baryon operators. However, local multiquark operators with four or more (anti)quarks are computationally expensive in this framework: the cost of contractions scales with a high power of the number of Laplacian eigenvectors. We present a position-space sampling method within distillation that reduces this cost scaling by performing the momentum projection only over sparse grids rather than the full spatial lattice. We demonstrate the efficiency of this unbiased estimator for single-meson, single-baryon and local tetraquark operators. Using Wilson-clover fermions at the S ​ U ​ ( 3 ) SU(3) -flavour-symmetric point, we apply this method to study the importance of local tetraquark operators for the finite-volume T c ​ c ​ ( 3875 ) + T_{cc}(3875)^{+} spectrum. To this end, we extend a large basis of bilocal D ​ D ∗ DD^{*} and D ∗ ​ D ∗ D^{*}D^{*} scattering operators by including local tetraquark operators. The inclusion of local operators leads to significant shifts in several energy levels. Finally, we show the effect of these shifts on the D ​ D ∗ DD^{*} scattering phase shift from a single-channel s s -wave Lüscher analysis. I Introduction In recent decades, numerous exotic hadrons have been discovered, including the \chi_{c1}(3872) and other charmonium-like states, as well as various tetraquarks and pentaquarks Hüsken et al. 2025 ; Chen et al. 2023 . A prominent example is the T_{cc}(3875)^{+} tetraquark, which was observed and studied at LHCb Aaij et al. 2022a ; Aaij et al. 2022b . It was found in the D^{0}D^{0}\pi^{+} mass spectrum just below the D^{*+}D^{0} threshold and is an I(J^{P})=0(1^{+}) state. With a minimal quark content of cc\overline{u}\overline{d} , it does not fit into the quark model picture and is therefore clearly an exotic hadron. Another interesting exotic hadron is the d^{*}(2380) dibaryon discovered by the WASA-at-COSY collaboration Adlarson et al. 2011 . It is an excited state of the deuteron with I(J^{P})=0(3^{+}) , lying about 80 MeV below the \Delta\Delta threshold. These discoveries call for theoretical predictions of the masses, widths, and other properties of such exotic hadrons. Lattice quantum chromodynamics (QCD) is the only known method to provide such predictions from first principles. Since in lattice QCD one always works in a finite box, it is necessary to relate finite-volume quantities obtained there to infinite-volume observables. For single-particle states that are stable within QCD, finite volume effects on the energy are exponentially suppressed by the box size times the smallest mass scale, i.e. the pion mass Lüscher 1986a . However, most hadrons are not QCD-stable and can decay into other hadrons. In this case, the finite-volume contributions only decay with inverse powers of the box size and have to be taken into account. One way of dealing with these finite-volume effects is to use Lüscher’s finite-volume quantization conditions Lüscher 1986b ; Lüscher 1991 . They relate the low-lying finite-volume energies to the scattering amplitude in infinite volume. The positions of the poles in this amplitude are then used to extract the masses and widths of the hadrons via amplitude analysis. The current best strategy for computing the low-lying finite-volume spectrum is the variational method Blossier et al. 2009 . It uses a basis of interpolating operators, all carrying the quantum numbers of the desired hadron, to construct a correlator matrix. By solving a generalized eigenvalue problem (GEVP), the lowest few energy levels can be extracted at large Euclidean times. To suppress the influence of excited states, one wants to use many such operators, and since the inner structure of exotic hadrons is generally not known, they should have different spin, color and spatial structures to capture the low-lying spectrum well. Therefore, we want to use nonlocal scattering operators to describe states that resemble weakly bound “molecular” states, as well as local operators for more deeply bound states. Not including such a variety of operators can lead to an inaccurate finite-volume spectrum Wilson et al. 2015 . An efficient framework for computing correlation functions of nonlocal operators is distillation Peardon et al. 2009 . It employs Laplacian Heaviside (LapH) smearing, in which the lowest eigenvectors of the spatial Laplacian define a subspace that allows to fully invert the Dirac operator. Distillation has been used successfully for two and three meson scattering Wilson et al. 2015 ; Moir et al. 2016 ; Briceño et al. 2018 ; Woss et al. 2019 ; Lang and Wilson 2022 ; Boyle et al. 2025 ; Yan et al. 2024 ; Mohler et al. 2013 ; Fischer et al. 2021a ; Hansen et al. 2021 ; Fischer et al. 2021b ; Dawid et al. 2025a , tetraquarks Padmanath and Prelovsek 2022 ; Whyte et al. 2025 ; Prelovsek et al. 2025 ; Shrimal et al. 2025 , meson-baryon scattering Lang and Verduci 2013 ; Hackl and Lehner 2024 ; Bulava et al. 2023 ; Bulava et al. 2024a ; Bulava et al. 2024b and baryon-baryon scattering Hörz et al. 2021 ; Green et al. 2021 ; Xing et al. 2025 ; Bulava et al. 2025 . On the other hand, two-point functions of local multiquark operators with four or more (anti)quarks can be obtained more easily using standard approaches such as the point-to-all method. Nevertheless, they have also been computed within the distillation framework Cheung et al. 2017 ; Ortiz-Pacheco et al. 2024 ; Prelovsek et al. 2025 . It is challenging to use these local operators in distillation because one needs to construct high-rank tensors, which make the contractions computationally expensive. A possible solution to this problem was recently proposed Lang et al. 2025 . In this paper, we present a different approach for reducing the cost of local operators in distillation. This method uses position-space sampling, and we applied it to the quantum numbers relevant for the T_{cc} tetraquark. This paper is organized as follows: In Section II , we give a brief overview of the distillation method and show why local multiquark operators are expensive in this framework. In Section III , we present a position-space sampling method within distillation and show how it can be used to reduce the cost of local multiquark operators. In Section IV , we investigate the efficiency of this method for single-meson, single-baryon and local tetraquark operators, and analyze the importance of the latter for the T_{cc} tetraquark. We end with our conclusion in Section V . II Distillation Method In hadron spectroscopy, field smearing is crucial for reducing the coupling of hadron operators to high-energy states. For the quark fields, we can use a smearing kernel K(t) that acts on spin, color and position space but does not mix different time slices. The

Read the complete text