Reconstruction of neutrino events in the Accelerator Neutrino Neutron Interaction Experiment: Part I

T. Zhang · 2025

Read Reconstruction of neutrino events in the Accelerator Neutrino Neutron Interaction Experiment: Part I by T. Zhang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-26050.txt.

Introduction

S. Abubakar and M. Acsencio-Sosa lead sixty six co-authors in a report on reconstructing neutrino events in the ANNIE experiment at Fermilab. ANNIE uses a twenty six ton water Cherenkov tank, which detects faint light rings from charged particles in water, fed by the Booster Neutrino Beam. Its goals are to measure neutron production when neutrinos hit oxygen and to test new detector technology.

The paper describes reconstruction performance using only the conventional light sensors and a downstream muon spectrometer, before newer picosecond detectors and a water based scintillator vessel are added. That baseline matters because later gains can be measured against it. Even the baseline methods differ from larger water detectors, due to the small size of ANNIE.

Catalog record

CREATORT. Zhang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-26050

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reconstruction of neutrino events in the Accelerator Neutrino Neutron Interaction Experiment: Part I T. Zhang Abstract The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) was designed to reconstruct neutrino events from the Fermilab Booster Neutrino Beam (BNB) with the parallel goals of measuring neutron production in interactions with oxygen and serving as a testbed for new technology. The ANNIE detector consists of a 26-ton water Cherenkov target tank instrumented with conventional photomultiplier tubes (PMTs), a downstream tracking muon spectrometer , and an upstream double wall of plastic scintillator to serve to veto charged particles incoming from neutrino events that occur upstream of the experimental setup. ANNIE has also deployed multiple Large-Area Picosecond PhotoDetectors (LAPPDs) and a test vessel of water-based liquid scintillator (WbLS). This paper describes the event reconstruction performance of the detector before implementation of these novel technologies, which will serve as a baseline against which their impact can be measured. That said, even the techniques used for event reconstruction using only the conventional PMT array and muon spectrometer are significantly different than those used in other water Cherenkov detectors due to the small size of ANNIE (which makes nanosecond-scale timing not as useful as in a large detector) and the availability of reconstruction information from the tracking muon spectrometer. We demonstrate that combining the information from these two elements into a single fit using only pattern recognition yields a muon vertex uncertainty of 60 cm, a directional uncertainty of 13.2 degrees, and energy reconstruction uncertainty of about 10% for BNB muon neutrino Charged Current Zero Pion (CC0 π \pi ) events. 1 Introduction Water Cherenkov detectors have been in use for many years as a practical way to track secondary charged particles from neutrino interactions in a large target mass for a relatively low cost. Underground detectors up to 50 kilotons have been built [ 1 , 2 ] and the Hyper-Kamiokande detector [ 3 ] will have a mass of over 250 kilotons. An advantage of such detectors is that they are sensitive to neutron capture gammas [ 4 , 5 ] , especially if the water is loaded with a capture agent such as gadolinium [ 6 , 7 , 8 ] . Understanding the neutrino-induced neutron multiplicity in interactions is important in that such neutrons can carry away significant energy from the primary vertex, and in addition they carry information on the initial neutrino interaction itself. In this paper we describe the vertex reconstruction and tracking performance of the Accelerator Neutrino Neutron Interaction Experiment (ANNIE), which was built to measure the neutron multiplicity from muon neutrino interactions on oxygen in the Fermilab Booster Neutrino Beam (BNB) and also to demonstrate the impact on neutrino event reconstruction of two new technologies: (i) Large Area Picosecond PhotoDetectors (LAPPDs) and (ii) Water-based Liquid Scintillator (WbLS). The following sections describe the basic elements of the ANNIE detector, which includes (i) a target tank containing 26 tons of gadolinium-loaded water and a conventional PhotoMultiplier Tube (PMT) array, (ii) a plastic scintillator and iron plate muon spectrometer known as the Muon Range Detector (MRD), and (iii) an upstream plastic scintillator array called the Front Muon Veto (FMV). The performance described here is based only the conventional PMT array, the FMV, and the MRD as applied to muon track and energy reconstruction for Charged Current Zero Pion (CC0 \pi ) events from BNB muon neutrino interactions occurring in the target tank. In later papers we will describe the improvements in this baseline performance enabled by use of LAPPDs [ 9 ] which have very fast timing (60 – 70 ps) compared to the PMTs deployed here, and of WbLS [ 10 ] which allows for the detection of charged particles below Cherenkov threshold in addition to improving the light yield (and hence detectability) of neutron capture events following neutrino interactions. Note that even using these conventional beam elements the small size of ANNIE does not allow for the mostly time-based reconstruction used in much larger Cherenkov detectors, as the PMT timing uncertainty of 1–2 ns ( \sigma ) due to Transit Time Spread (TTS) is large compared to the PMT array size (2.3 m diameter). This paper describes novel techniques that were developed to combine tank PMT Cherenkov pattern recognition with MRD data to reconstruct the track and energy of neutrino-induced muons with minimal use of PMT timing. The neutron detection capabilities of ANNIE are also not utilized here and thus will be the subject of a future paper. The goal of this paper is to describe the first steps towards the ultimate goal of ANNIE, which is to develop the technology and reconstruction techniques for future large optical detectors. 2 Overview of the ANNIE Detector In this section we present a functional summary of the detector components relevant to the reconstruction of neutrino events. The detector consists of three major components, as shown in Figure 1 . Note that the neutrino beam enters from the left in this figure. In order of position along the beam these are: (1) the FMV; (2) a gadolinium-loaded water tank containing the neutrino target and optical instrumentation; and (3) the MRD positioned downstream from the neutrino target and consisting of interleaved layers of iron and scintillator. Figure 1 : A schematic drawing of the ANNIE detector system. The neutrino beam enters from the left and then passes through the three major detector subsystems: (i) the Front Muon Veto, (ii) the Gd-loaded target tank instrumented with PMTs and LAPPDs, and (iii) the Muon Range Detector. Each detector element plays a crucial role in event reconstruction. The FMV tags charged products from upstream interactions in the rock, enabling the separation of these external events from those originating in the water tank. Photosensors on the tank walls detect Cherenkov radiation produced by energetic charged particles, providing the majority of information on event kinematics and topology. The downstream MRD stops muons that exit the tank, providing some tracking information and allowing the reconstruction of their energy from their penetration depth. Finally, the addition of gadolinium to the water enhances the visibility of neutron captures, enabling high efficiency neutron counting. 2.1 Target Tank and Photomultiplier Tube Array The ANNIE tank is an upright, cylindrical steel storage tank 3.96 meters tall and 3.05 meters in diameter. The inside and outside of the tank are coated with a corrosion-resistant epoxy and a plastic white PVC inner liner is used for compatibility with the gadolinium-loaded water. The tank is sealed with a custom lid that provides access for instrumentation cables, calibration devices, and other test equipment. Sitting inside the tank is a steel inner structure that holds an array of 132 PMTs of three different models, as shown in Table 1 . Figure 2 (left) depicts the 3D design of the detector, with PMTs on the inner structure grouped by color according to their model. These provide roughly 14% photocathode coverage of the inner structure area. PMT Type Diameter (in) Number Location Hamamatsu R7081 10 72 bottom and sides ETEL D784UKFLB 11 20 top Hamamatsu R5912-100 8 40 sides Table 1 : Photomultiplier types used in ANNIE. Multiple types due to the availability of legacy units of the 10-inch and 11-inch models. Figure 2

Read the complete text