Selective Parametric Amplification of Degenerate Modes in Electrostatically Transduced Coupled Beam Resonators
Vishnu Kumar, Nishta Arora, Bhargavi B.A, Akshay Naik, Saurabh A. Chandorkar · 2025
Read Selective Parametric Amplification of Degenerate Modes in Electrostatically Transduced Coupled Beam Resonators by Vishnu Kumar, Nishta Arora, Bhargavi B.A, Akshay Naik, Saurabh A. Chandorkar (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-25903.txt.
Introduction
Vishnu Kumar, Nishta Arora, Bhargavi B. A., Akshay Naik, and Saurabh A. Chandorkar study paired vibrating beams that can amplify one shared motion while leaving another alone. The device is a double ended tuning fork resonator, two beams joined by a coupling beam, driven by electric forces. Parametric driving, where a property is varied in rhythm, can boost a vibration if timed well.
Kumar and the team find the out of phase mode, where beams move in opposite senses, shows strong nonlinear response and gain, while the in phase mode stays mostly linear. Driving through the coupling spring lets them select the mode and tune gain up or down by phase. The gain reached about thirteen decibels, which suits signal and logic uses.
Catalog record
| CREATOR | Vishnu Kumar, Nishta Arora, Bhargavi B.A, Akshay Naik, Saurabh A. Chandorkar |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 16 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-25903
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Selective Parametric Amplification of Degenerate Modes in Electrostatically Transduced Coupled Beam Resonators Vishnu Kumar, Nishta Arora, Bhargavi B.A, Akshay Naik, Saurabh A. Chandorkar Abstract Parametric excitation in coupled mechanical systems has enabled advances in sensing, computation, and phonon control. The function of distinct phase modes using parametric driving remains insufficiently explored. Here, we investigate the nonlinear and parametric response of degenerate phase modes in a Double Ended Tuning Fork (DETF) resonator. Our measurements reveal pronounced nonlinearity and parametric amplification in the out-phase mode, attributed to the dominant contribution of the coupling beam, while the in-phase mode remains predominantly linear. Uniquely, we demonstrate parametric excitation through the coupling spring, enabling selective amplification and de-amplification controlled via the relative phase between harmonic and parametric drives. A parametric gain of ∼ \sim 13 dB is achieved in the out-phase mode, with phase-dependent modulation of amplification, indicating its suitability for signal processing, logic operations, and memory elements based on degenerate modes. These results establish a new approach to exploiting mode-specific nonlinear dynamics in coupled resonators for emerging applications in sensing and phononic control. I Introduction Parametric excitation in micro- and nano-electromechanical systems (M/NEMS) provides a powerful tool to control mechanical motion by periodically modulating system parameters, typically stiffness, at twice the resonant frequency Prasad et al. 2017 . This approach has been widely used to enhance signal sensitivity and dynamic range in diverse applications, including mass sensing Zhang et al. 2002 , logic operations Tadokoro and Tanaka 2021 , bifurcation-based amplifiers Karabalin et al. 2011 , and quantum-limited measurements Szorkovszky et al. 2011a ; Zhang et al. 2024 . In coupled mechanical systems, parametric driving further enables controlled interactions between collective modes, allowing the manipulation of their amplitudes and phases through engineered coupling Guo et al. 2023 ; Prasad et al. 2019 . Nonlinear effects play a central role in such systems, facilitating signal amplification Xu et al. 2024 , noise squeezing Szorkovszky et al. 2011b , enhanced sensing Zhang et al. 2002 ; Zhang et al. 2024 ; Thiruvenkatanathan et al. 2010 , frequency stabilization Miller et al. 2021 , and control of dynamical states Okamoto et al. 2013 . Coupled resonators, in particular, have been shown to exhibit energy transfer Zhang et al. 2025 , synchronization Matheny et al. 2014 , and mode hybridization Doster et al. 2019 , offering new ways for coherent phonon control and dynamic mode selection. These effects have spurred the development of high-performance M/NEMS sensors Zhang et al. 2024 ; Gil-Santos et al. 2009 and computation architectures, including mechanical Ising machines Tadokoro and Tanaka 2021 ; Han et al. 2024 . Despite these advances, the distinct roles of phase modes, namely in-phase (symmetric) and out-phase (antisymmetric), in governing the parametric dynamics of coupled systems are still not well understood. In particular, the effect of the coupling element on phase mode-specific parametric amplification has received little attention. Prior studies have shown that inter-beam coupling in multimode or membrane systems can modify nonlinearity and energy localization Zhou et al. 2019 ; Hälg et al. 2022 , however, parametric excitation mediated through the coupling beam remains unexplored. In this work, we investigate the nonlinear and parametric dynamics of degenerate phase modes in a Double-Ended Tuning Fork (DETF) resonator. Using harmonic and parametric excitation schemes, we directly probe the in-phase and out-of-phase vibrational modes. Remarkably, we observe pronounced nonlinearity and selective parametric amplification in the out-phase mode arising from the dominant contribution of the coupling beam, while the in-phase mode remains largely linear. The selective amplification arises from the coupling beam’s contribution to the system stiffness, which dominates the nonlinear dynamics. A maximum parametric gain of approximately 13 dB is achieved in the out-phase mode, with clear phase-dependent modulation of amplification. Our findings establish a new approach for mode-selective control of nonlinear dynamics in coupled mechanical systems. This mechanism provides a pathway toward mechanically reconfigurable platforms for signal processing, logic operations, and memory elements, as well as for applications in phononic and quantum transduction Bagheri et al. 2011 ; Miao et al. 2022 ; Szorkovszky et al. 2011b ; Villanueva et al. 2011 ; Samanta et al. 2023 . II Design and Measurement Schematic Figure 1: Device measurement technique: (a) Scanning Electron Microscope (SEM) image of the coupled beam resonators, known as DETF resonator, (b) the measurement setup for the nonlinear and parametric measurements using a lock-in amplifier, (c) the spring mass system of DETF resonator (d) the frequency response of the degenerate modes of the DETF, in-phase and out-phase modes. The DETF resonator is fabricated using the SOI substrate (refer to supplementary section I for detailed fabrication). The SEM image of the fabricated device is shown in Figure 1 a. The first fundamental degenerate modes (in-phase and out-phase) are measured harmonically and parametrically using a Zurich lock-in amplifier (LIA), as shown in Figure 1 b. Figure 1 c shows the spring mass system configuration, highlighting the coupling spring connected to the resonating beams. The degenerate modes arise from the two resonating beams connected through coupling beams. The input excitation is applied on one of the outer electrodes and measured output signal at the other, which is connected to the trans-impedance amplifier with sufficient gain to enhance the signal above the noise level of the electronics and change the current output signal to voltage signal, before sending to the Zurich lock-in amplifier (LIA). The frequency response for the degenerate modes is shown in Figure 1 d along with its mode shapes simulated using COMSOL. III Results and Discussion III.1 Harmonic Response As a coupled system, the DETF consists of two resonating beams linked by coupling beams. At the fundamental frequency, the beams exhibit two degenerate phase modes, an in-phase (IP) mode and an out-phase (OP) mode, with resonant frequencies of 766.1 kHz and 791.75 kHz, respectively. By applying a sinusoidal signal at resonance frequency through electrostatic excitation, the system responds nonlinearly as the excitation increases, and the electrostatic response is measured to certain forces. Despite, expecting similar nonlinear response from both the modes, we observed that the out-phase mode is much more nonlinear than the in-phase mode, as shown in Figure 2 a and Figure 2 b. The in-phase mode also exhibits amplitude splitting due to higher-order mode coupling Arora and Naik 2022 . Similarly, the notch in the out-phase response shows the higher-order mode coupling effect on the nonlinearity, is called a surge point Keşkekler et al. 2021 and further studies of underlying behavior will be addressed in future work. The underlying nonlinear dynamics that attribute to out-phase mode is linked to the strength of the coupling beam. To understand this behavior better, refer analytical modeling in supplementary section II. The equation of motion of two phase modes are: m\ddot{u}+c\dot{u}+(k_{1}-f_{b})u=f_{a}cos(\omega t) (1) m\ddot{v}+c\dot{v}+(k_{1}+2k_{c1}-f_{b})v-2k_{c3}v^{3}=f_{a}cos(\omega t) (2) Figure 2: Device harmonic measurement: Frequency response of (a) in-phase mode and (b)out-phase mode with increasing actuation drive. The out-phase mode shows softening nonlinearity. The dynamical behavior of distinct phase modes show the dominant coupling effect that also subjected to the nonlinearity. The softening nonlinear coefficients are in order of 10^{18}N/m^{3} and the increment with excitation shows the linear behavior, as discussed in supplementary section III. III.2 Parametric Response Parametric excitation induces oscillations in a