Enhanced quality factors at resonance in acoustofluidic cavities embedded in matched elastic metamaterials
Valdemar Frederiksen, Henrik Bruus · 2025
Read Enhanced quality factors at resonance in acoustofluidic cavities embedded in matched elastic metamaterials by Valdemar Frederiksen, Henrik Bruus (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-25527.txt.
Introduction
Valdemar Frederiksen and Henrik Bruus show how to boost resonance quality in acoustofluidic cavities. Their 2025 physics paper embeds liquid-filled cavities inside a matched elastic metamaterial. Matching the metamaterial moduli to the liquid raises the quality factor. That happens at selected resonance modes. The gain is two to three orders of magnitude. A comparable conventional cavity does far worse. The result is a compact theoretical finding for designers of small acoustic devices that hold and move fluids.
Catalog record
| CREATOR | Valdemar Frederiksen, Henrik Bruus |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-25527
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Enhanced quality factors at resonance in acoustofluidic cavities embedded in matched elastic metamaterials Valdemar Frederiksen, Henrik Bruus Abstract We show that by embedding liquid-filled acoustofluidic cavities in a metamaterial, the quality factor of the cavity at selected acoustic resonance modes can be enhanced by 2 to 3 orders of magnitude relative to a comparable conventional cavity by matching the coarse-grained elastic moduli of the metamaterial to the acoustic properties of the liquid. I Introduction The quality factor Q of an acoustic resonance mode in a liquid-filled acoustofluidic cavity embedded in an elastic solid is limited by the dissipation in the liquid, mainly due to the large stresses in the thin viscous boundary layers near the elastic walls of the cavity. For MHz ultrasound resonance modes in typical water-filled acoustofluidic cavities with kinematic viscosity \nu at angular frequency \omega , Q -factors are often in the range 10 - 500 Barnkob et al. 2010 , a value set by the relevant length scale of the cavity relative to the thickness \delta=\sqrt{\frac{2\nu}{\omega}} of the viscous boundary layer Bach and Bruus 2018 . For a long straight box-shaped cavity of length L , width W , and height H , with H<W\ll L , it is found that Q=\frac{H}{\delta} . Given a typical height H=160~\textrm{\textmu{}m} and a standing half-wave along the width W=375~\textrm{\textmu{}m} with a resonance frequency of 2 MHz, we have the boundary-layer width \delta=0.4~\textrm{\textmu{}m} , and thus Q=400 . In the above example, the boundary layer is formed by the viscous friction in the liquid, as the acoustic velocity of the liquid is changing from its bulk value v_{1} to zero at the nearly rigid wall over a distance of \delta . The smallness of \delta is the reason that the dissipation \dot{W}_{\mathrm{BL}}\approx\eta\big(\frac{v_{1}}{\delta}\big)^{2} in the boundary layer dominates the total dissipation in the system. The Q -factor may be increased considerably simply by removing the boundary layer. In this paper we show that the boundary layer may be removed or at least strongly suppressed by embedding the acoustic cavity not in a conventional elastic solid, denoted by superscript ” \mathrm{sl} ”, but instead in an elastic metamaterial denoted by superscript ” \mathrm{mm} ”. By tuning the coarse-grained elastic moduli of the metamaterial, it is possible at a given resonance to match at the solid-liquid interface of the cavity the vibrational velocity \partial_{t}\bm{u} of the metamaterial to the acoustic velocity \bm{v}_{1} of the liquid. This matching will suppress the boundary layer, and the dissipation of the system will then be limited by the small bulk dissipation of the liquid, and the Q -factor increases by a factor 200 to \sim 10^{5} . Figure 1: A sketch of the model system with its five domains: the solid base \Omega^{\mathrm{sl}}_{\mathrm{base}} , the fluid channel \Omega^{\mathrm{fl}} , the solid lid \Omega^{\mathrm{sl}}_{\mathrm{lid}} , and the metamaterial walls \Omega^{\mathrm{mm}}_{\mathrm{up}} and \Omega^{\mathrm{mm}}_{\mathrm{down}} . The green double arrow represents the oscillation amplitude d_{0} of the lid (green line). The paper is organized as follows: In Sec. II we present the theory of acoustic cavities embedded in an elastic metamaterial. In Sec. III we introduce a specific two-dimensional (2D) model, which is simulated numerically in Sec. IV , using the finite-element software COMSOL Multiphysics, as well as analytically for a simplified case. Finally, in Secs. V and VI we discuss the results and present our conclusions and outlook. Animations of selected results are provided in the Supplemental Material 1 1 1 See Supplemental Material at https://bruus-lab.dk/files/Frederiksen_metamaterial_acoustofluidics_suppl.zip for animated gifs of Figs. 3 and 6 . . II Theory II.1 The 2D model system Our proposed system is assumed to be translational invariant in the length direction L and with the rectangular cross section sketched in Fig. 1 . In this cross section a fluid-filled cavity \Omega^{\mathrm{fl}} circumscribing a rectangle of width W^{\mathrm{fl}} and height H^{\mathrm{fl}} is surrounded by a solid material region \Omega^{\mathrm{sl}} which is subdivided into four domains. The base \Omega^{\mathrm{sl}}_{\mathrm{base}} is a large rectangular block of regular solid material of width W^{\mathrm{sl}} and height H^{\mathrm{sl}} and with a free surface to the left. The lid \Omega^{\mathrm{sl}}_{\mathrm{lid}} is a thin rectangular region of regular solid material of width W^{\mathrm{sl}}_{\mathrm{lid}} with a prescribed time-harmonic displacement \bm{u}^{\mathrm{phys}}=d_{0}\cos(\omega t)\>\bm{e}_{y} on its rightmost boundary. The remaining two rectangular regions \Omega^{\mathrm{mm}}_{\mathrm{up}} and \Omega^{\mathrm{mm}}_{\mathrm{down}} above and below the cavity consist of a mechanical metamaterial, where the small-scale geometry has been optimized such as to make the metamaterial move in sync with the fluid in the cavity. We treat all acoustic fields g_{1} to be complex-valued with a harmonic time dependence \mathrm{e}^{-\mathrm{i}\omega t} , such that the real part corresponds to the true physical field g^{\mathrm{phys}} , g^{\mathrm{phys}}(\bm{r},t)=\mathrm{Re}[g_{1}(\bm{r})\>\mathrm{e}^{-\mathrm{i}\omega t}]. (1) II.2 The fluid domain To model the acoustic behavior of the coupled fluid-solid system, we first consider the governing equations in the fluid domain \Omega^{\mathrm{fl}} in terms of the pressure p , velocity \bm{v} , and density \rho^{\mathrm{fl}} , namely the continuity and Navier–Stokes equation, \displaystyle\partial_{t}\rho^{\mathrm{fl}} \displaystyle=-\bm{\nabla}\cdot(\rho^{\mathrm{fl}}\bm{v}), (2a) \displaystyle\rho^{\mathrm{fl}}\partial_{t}\bm{v} \displaystyle=\bm{\nabla}\cdot\bm{\sigma}^{\mathrm{fl}}-(\rho^{\mathrm{fl}}\bm{v}\!\cdot\!\bm{\nabla})\bm{v}, (2b) where the fluid stress tensor \bm{\sigma}^{\mathrm{fl}} is given in terms of p , \bm{v} , and the respective shear and bulk viscosity \eta and \eta^{\mathrm{b}} , \bm{\sigma}^{\mathrm{fl}}=\big[-p+\big(\eta^{\mathrm{b}}-\tfrac{2}{3}\eta\big)\bm{\nabla}\cdot\bm{v}\big]\bm{I}+\eta\big[\bm{\nabla}\bm{v}+(\bm{\nabla}\bm{v})^{\textsf{T}}\big]. (3) At the fluid-solid interface, which is the boundary \partial{\Omega^{\mathrm{fl}}} of the fluid domain {\Omega^{\mathrm{fl}}} with normal vector \bm{n} , the boundary conditions are continuity in velocity and normal stress, \displaystyle\bm{v} \displaystyle=\partial_{t}\bm{u}, \displaystyle\text{ at }\partial{\Omega^{\mathrm{fl}}}, (4a) \displaystyle\bm{\sigma}^{\mathrm{fl}}\cdot\bm{n} \displaystyle=\bm{\sigma}^{\mathrm{sl}}\cdot\bm{n}, \displaystyle\text{ at }\partial{\Omega^{\mathrm{fl}}}, (4b) where \bm{\sigma}^{\mathrm{sl}} and \partial_{t}\bm{u} is the stress and velocity of the material surrounding the fluid domain. We solve the above equations by applying perturbation theory in terms of the acoustic Mach number assuming fields to become progressively weaker with increasing orders. For the zeroth-order solution, we assume the fluid to be at rest \bm{v}_{0}=\bm{0} with constant pressure p_{0} and density \rho_{0}^{\mathrm{fl}} . We then assume the first-order fields to be time-harmonic, g_{1}=g_{1}(\bm{r})\>\mathrm{e}^{-\mathrm{i}\omega t} , and relate the first-order pressure and density, p_{1}(\bm{r})=c^{\,2}_{0}\rho_{1}^{\mathrm{fl}} , by assuming a constant compressibility \kappa_{0}^{\mathrm{fl}}=\big[\rho^{\mathrm{fl}}_{0}(c_{0}^{\mathrm{fl}})^{2}\big]^{-1} , where c_{0}^{\mathrm{fl}} is the speed of sound. Finally, we truncate the perturbation expansion and keep only zeroth-, first-, and time-averaged second-order fields, \displaystyle\rho^{\mathrm{fl}}(\bm{r},t) \displaystyle=\rho_{0}^{\mathrm{fl}}+\rho_{0}^{\mathrm{fl}}\kappa_{0}^{\mathrm{fl}}p_{1}(\bm{r})\>\mathrm{e}^{-{\mathrm{i}\omega t}}+\rho_{2}^{\mathrm{fl}}(\bm{r}), (5a) \displaystyle p(\bm{r},t) \displaystyle=p_{0}+p_{1}(\bm{r})\>\mathrm{e}^{-{\mathrm{i}\omega t}}+p_{2}(\bm{r}), (5b) \displaystyle\bm{v}(\bm{r},t) \displaystyle=\bm{v}_{1}(\bm{r})\>\mathrm{e}^{-{\mathrm{i}\omega t}}+\bm{v}_{2}(\bm{r}). (5c) Inserting this expansion into Eq. ( 2 ), we obtain the first-order governing equations, \displaystyle i\omega\kappa_{0}^{\mathrm{fl}}p_{1} \displaystyle=\bm{\nabla}\cdot\bm{v}_{1}, (6a) \displaystyle i\omega\rho_{0}^{\mathrm{fl}}\bm{v}_{1} \displaystyle=\bm{\nabla}p_{1}-\eta\nabla^{2}\bm{v}_{1}-\big(\eta^{\mathrm{b}}-\tfrac{2}{3}\eta\big)\bm{\nabla}(\bm{\nabla}\cdot\bm{v}_{1}), (6b) which we solve numerically, and which we work with analytically moving forward. Numerically, we also solve for the second-order fields in {\Omega^{\mathrm{fl}}} , which are governed by the equations Bach and Bruus 2018 , \displaystyle\rho_{0}^{\mathrm{fl}}\bm{\nabla}\cdot\bm{v}_{2}+\bm{\nabla}\cdot\big\langle\rho_{1}^{\mathrm{fl}}\bm{v}_{1}\big\rangle \displaystyle=0,\; \displaystyle\text{ in }{\Omega^{\mathrm{fl}}}, (7a) \displaystyle\bm{\nabla}\cdot\bm{\sigma}_{2}^{\mathrm{fl}}-\rho_{0}^{\mathrm{fl}}\bm{\nabla}\cdot\big\langle\bm{v}_{1}\bm{v}_{1}\big\rangle \displaystyle=\bm{0},\; \displaystyle\text{ in }{\Omega^{\mathrm{fl}}}, (7b) \displaystyle\bm{v}_{2}+\big\langle(\bm{u}_{1}\cdot\bm{\nabla})\bm{v}_{1}\big\rangle \displaystyle=\bm{0},\; \displaystyle\text{ at }\partial{\Omega^{\mathrm{fl}}}, (7c) where the bracket \big\langle A_{1}B_{1}\big\rangle represents the time average over one oscillation period of the product of any two complex-valued first-order fields A_{1} and B_{1} , \big\langle A_{1}B_{1}\big\rangle=\frac{1}{2}\re\big[A_{1}B^{*}_{1}\big], (8) with the asterisk being the complex conjugate. To characterize the utility of acoustic modes with regard to focusing microparticles by acoustophoresis, we calculate for each mode three useful quantities: The time-averaged acoustic energy density E_{\mathrm{ac}}^{\mathrm{fl}} in the fluid, E_{\mathrm{ac}}^{\mathrm{fl}}=\frac{\kappa_{0}^{\mathrm{fl}}}{2}\big\langle p_{1}p_{1}\big\rangle\!+\!\frac{\rho_{0}^{\mathrm{fl}}}{2}\big\langle{v}_{1,i}{v}_{1,i}\big\rangle=\frac{\kappa_{0}^{\mathrm{fl}}}{4}|p_{1}|^{2}\!+\!\frac{\rho_{0}^{\mathrm{fl}}}{4}|\bm{v}_{1}|^{2}, (9a) the Rayleigh streaming speed v_{2}^{\mathrm{Rayl}} defined by, v_{2}^{\mathrm{Rayl}}=\frac{3E_{\mathrm{ac}}^{\mathrm{fl}}}{2\rho_{0}^{\mathrm{fl}}c_{0}^{\mathrm{fl}}}, (9b) and the spatial average \big\langle\!\big\langle v_{2}\big\rangle\!\big\rangle of the magnitude of the streaming velocity \bm{v}_{2} , \big\langle\!\big\langle v_{2}\big\rangle\!\big\rangle=\frac{1}{\mathcal{V}^{\mathrm{fl}}}\int_{{\Omega^{\mathrm{fl}}}}|\bm{v}_{2}|\>\mathrm{d}V. (9c) If we imagine placing a spherical particle with radius a