Influence of surfactant kinetics on rapid interface creation via microjet impact on liquid pools
D. Fernández-Martínez, E. J. Vega, J. M. Montanero, U.J. Gutiérrez-Hernández, D. Fernández Rivas · 2025
Read Influence of surfactant kinetics on rapid interface creation via microjet impact on liquid pools by D. Fernández-Martínez, E. J. Vega, J. M. Montanero, U.J. Gutiérrez-Hernández, D. Fernández Rivas (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-25469.txt.
Introduction
D Fernandez-Martinez led four co-authors on surfactant kinetics. E J Vega, J M Montanero, and U J Gutierrez-Hernandez helped. D Fernandez Rivas closes the five-author team. Their 2025 paper studies rapid interface creation experimentally. A submillimeter jet impacts a surfactant-laden liquid pool. The pool is much larger than the jet.
Cavity retraction and closure occur within a submillisecond. That speed tests dynamic surface tension reduction ability. They compare two surfactants with varied adsorption speeds. Sodium dodecyl sulfate adsorbs at moderately fast rates. Its collapse pathway looked nearly like pure water. Dynamic surface tension reduction seemed negligible there. Surfynol 465 adsorbs at ultrafast rates instead. It allowed deeper cavities that persisted longer. A harmonic oscillator model captured cavity retraction well. That held in the deep seal regime specifically. Fitted damping ratios matched dynamic surface tensions always.
Catalog record
| CREATOR | D. Fernández-Martínez, E. J. Vega, J. M. Montanero, U.J. Gutiérrez-Hernández, D. Fernández Rivas |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 31 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-25469
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Influence of surfactant kinetics on rapid interface creation via microjet impact on liquid pools D. Fernández-Martínez, E. J. Vega, J. M. Montanero, U.J. Gutiérrez-Hernández, D. Fernández Rivas Abstract We experimentally investigate the influence of surfactant adsorption kinetics on cavity dynamics during the rapid formation of interfaces. For this purpose, we use a submillimeter jet impacting onto a surfactant-laden liquid pool much larger than the jet dimensions. Cavity retraction and closure occur on a submillisecond timescale, posing a stringent test of the ability of surfactants to reduce surface tension dynamically. Our experiments reveal the difference between the effects of sodium dodecyl sulfate (SDS), a surfactant with moderately fast adsorption kinetics, and Surfynol 465, a surfactant with ultrafast adsorption kinetics. For SDS, the collapse pathway is nearly indistinguishable from that of pure water, suggesting negligible dynamic surface tension reduction. In contrast, Surfynol allows the emergence of deeper cavities that persist longer in the liquid pool. The harmonic oscillator model accurately captures the cavity retraction in the deep seal regime. The fitted values of the damping ratios are consistent with the dynamic surface tensions. I Introduction The formation and evolution of liquid–fluid interfaces occur in a wide range of physical, biological, and technological processes. The presence of surfactants heavily influences the dynamics of these interfaces. Surfactants dissolved in a liquid phase adsorb at the liquid-fluid interface and alter interfacial mechanics ( Anna 2016 ; Manikantan and Squires 2020 ; Neel et al. 2021 ; Pierre et al. 2022 ; Vega and Montanero 2024 ; Montanero 2024 ) . Surfactants are nearly unavoidable in real environments and can regulate many interfacial processes even at trace concentrations ( Rodríguez-Aparicio et al. 2025 ) . At higher concentrations, surfactant can drastically change multiphase flows on the millimeter and submillimeter scales. Some relevant examples include droplet coalescence ( Ozan and Jakobsen 2019 ; Constante-Amores et al. 2021a ) and fragmentation ( Kamat et al. 2018 ; Ponce-Torres et al. 2020 ) , bubble stability ( Rubio et al. 2024 ; Herrada et al. 2025 ) , air entrainment ( Constante-Amores et al. 2021b ; Pico et al. 2024 ; Vega and Montanero 2024 ) , and tip streaming ( Anna 2016 ; Montanero 2024 ) , among many others. Surfactant adsorption kinetics at liquid–air interfaces are recognized as a key factor shaping transient interfacial properties during rapid flows ( Varghese et al. 2024 ; Manikantan and Squires 2020 ; Quetzeri-Santiago et al. 2025 ; Constante-Amores et al. 2023 ) . When a new surface is created (e.g., during jet or drop impact on a solid surface or a liquid pool), the initial surface tension practically equals that of the pure solvent. Then, the surface tension progressively decreases as surfactant molecules diffuse and adsorb to the new interface. The timescale over which dynamic surface tension approaches its equilibrium value is set by either diffusion of the surfactant molecule, the interfacial adsorption energy barrier, or a combination of both ( Manikantan and Squires 2020 ) . In many cases, this timescale is much larger than that characterizing the surface growth. Only “ultrafast” surfactants (those with very high adsorption rates) significantly reduce the surface tension during the rapid interface creation in phenomena such as the jet or drop impact, which takes place on timescales of the order of a few milliseconds. Standard surfactants fail to act on those timescales, even though they produce a considerable reduction in surface tension at equilibrium. The effect of surfactant kinetics has been observed in droplets impacting onto both a solid surface ( Varghese et al. 2024 ) and surfactant-laden pools and liquid films ( Quetzeri-Santiago et al. 2025 ; Constante-Amores et al. 2023 ) . Varghese et al. 2024 showed that only ultrafast surfactants significantly affect the maximum spreading diameter of a droplet impacting a smooth substrate. These surfactants trigger splashing or rim breakup at much lower Weber numbers than those of standard surfactants when the droplet impacts onto a surfactant-laden pool. Both numerical and experimental studies have demonstrated that Marangoni stress can delay or reshape the dynamics of interface retraction, particularly when the surfactant efficiently populates the rapidly expanding interface. A new interface is rapidly generated when a train of droplets or a jet strikes a liquid pool. Researchers have mapped out the universal stages of this ballistic process: expansion, retraction, and closure via interface pinch-off of the cavity formed by the impact ( Bouwhuis et al. 2016 ; Speirs et al. 2018 ) . This cavity can develop features similar to those seen in rigid-body impacts ( Aristoff and Bush 2009 ) . A balance of inertia and both capillary and viscous forces governs these stages. Three main cavity closure pathways have been distinguished: shallow seal, deep seal, and surface seal. The selection of the closure pathways can be predicted from the values of the Weber \text{We}=\rho v_{j}^{2}r_{j}/\sigma and Ohnesorge \text{Oh}=\mu/(\rho r_{j}\sigma)^{1/2} numbers characterizing the problem (here v_{j} and r_{j} are the jet velocity and radius, respectively, \rho and \mu are the density and viscosity of the liquid pool, respectively, and \sigma the liquid-air surface tension). Consider a submillimeter jet impacting on a low-viscosity liquid pool (characterized by a low Ohnesorge number). The shallow seal occurs for low enough Weber numbers. In this case, the maximum penetration depth of the cavity is relatively small, and the interface pinches close to the pool’s free surface (Fig. 1 a). Higher Weber numbers result in the deep seal closure, where the cavity typically penetrates deeper into the pool and the interface pinches farther from the surface (Fig. 1 b). In these regimes, the cavity may experience successive pinch-offs at multiple positions. Lastly, the surface seal occurs for sufficiently high Weber numbers. In this case, the surface closure occurs while the cavity is still expanding, and the interface pinches above the pool’s surface (Fig. 1 c). Similar cavity profiles have recently been reported when the target object is a droplet or a capillary liquid bridge ( Quetzeri-Santiago et al. 2021 ; Quetzeri-Santiago and Rivas 2023 ) . In all of these cases, high-speed jets and droplets create cavities that expand and collapse within submillisecond timescales. Numerical simulations reveal how the transition between capillary-driven deep seal closure and gas-pressure-driven surface seal closure becomes sensitive to impact parameters and fluid properties, providing a new methodology on rapid interfacial dynamics ( Kroeze et al. 2024 ) . Figure 1: Cavity closure modes: shallow seal (a), deep seal (b), and surface seal (c). The images were taken with pure water for a jet radius r_{j}= 30.9 \mu m (a), 36.4 \mu m (b), and 38.5 \mu m (c) and velocity v_{j}= 14.9 m/s (a), 19.9 m/s (b), and 29.3 m/s (c), respectively. The arrows indicate the pinch-off location. Directly linking surfactant kinetics to measurable mechanical outcomes during high-speed interface creation remains a challenge. To address this problem, we utilize submillimeter jet impact on liquid pools. This phenomenon allows us to create a new interface at a controlled rate that can match or exceed the adsorption rate of the surfactant dissolved in the liquid pool. Our objective is to report new jet impact experiments and to utilize them as a diagnostic for surfactant kinetics. In this study, we compare the effects