Design and Fabrication of Metal-Shielded Fiber-Cavity Mirrors for Ion-Trap Systems

Wei-Bin Chen, Ding Fang, Cheng-Hao Zhang, Jin-Ming Cui, Yun-Feng Huang, Chuan-Feng Li, Guang-Can Guo · 2025

Read Design and Fabrication of Metal-Shielded Fiber-Cavity Mirrors for Ion-Trap Systems by Wei-Bin Chen, Ding Fang, Cheng-Hao Zhang, Jin-Ming Cui, Yun-Feng Huang, Chuan-Feng Li, Guang-Can Guo (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-25294.txt.

Introduction

Wei-Bin Chen led six co-authors on cavity mirrors. Ding Fang, Cheng-Hao Zhang, and Jin-Ming Cui helped. Yun-Feng Huang, Chuan-Feng Li, and Guang-Can Guo followed. Their 2025 paper serves ion-trap quantum systems. Trapped ions inside micro-cavities form efficient quantum nodes. Such nodes could support scalable quantum networks.

Nearby dielectric materials cause serious practical problems. They cause surface charging on trap parts. They also raise ion heating rates sharply. Those effects can break stable ion trapping. The team designed metal-shielded fiber-cavity mirrors. They also describe how they fabricated the mirrors. With them, they built a needle ion trap. It held a single ion inside the cavity. Heating fell by more than tenfold, they report. That supports integrated ion-photon interfaces for quantum networks.

Catalog record

CREATORWei-Bin Chen, Ding Fang, Cheng-Hao Zhang, Jin-Ming Cui, Yun-Feng Huang, Chuan-Feng Li, Guang-Can Guo
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-25294

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Design and Fabrication of Metal-Shielded Fiber-Cavity Mirrors for Ion-Trap Systems Wei-Bin Chen, Ding Fang, Cheng-Hao Zhang, Jin-Ming Cui, Yun-Feng Huang, Chuan-Feng Li, Guang-Can Guo Abstract Trapped ions in micro-cavities constitute a key platform for advancing quantum information processing and quantum networking. By providing an efficient light–matter interface within a compact architecture, they serve as highly efficient quantum nodes with strong potential for scalable quantum network. However, in such systems, ion trapping stability is often compromised by surface charging effects, and nearby dielectric materials are known to cause a dramatic increase in the ion heating rate by several orders of magnitude. These challenges significantly hinder the practical implementation of ion trap systems integrated with micro-cavities. To overcome these limitations, we present the design and fabrication of metal-shielded micro-cavity mirrors, enabling the stable realization of ion trap systems integrated with micro cavities. Using this method, we constructed a needle ion trap integrated with fiber Fabry–Pérot cavity and successfully achieved stable trapping of a single ion within the cavity. The measured ion heating rate was reduced by more than an order of magnitude compared with unshielded configurations. This work establishes a key technique toward fully integrated ion–photon interfaces for scalable quantum network. I Introduction In quantum networks, efficient quantum interfaces require strong coupling between static and flying qubits kimble2008quantum . Numerous experiments have identified photons as ideal flying qubits krutyanskiy2024multimode ; walker2018long ; walker2020improving ; ward2022generation ; krutyanskiy2023entanglement ; schupp2021interface ; brekenfeld2020quantum , while placing static qubits inside optical cavities can greatly enhance their interaction with photons duan2010colloquium ; reiserer2015cavity ; reiserer2022colloquium . Consequently, extensive studies have been conducted on the interaction between various materials and optical cavities stute2012tunable ; keller2004continuous ; cetina2013one ; krutyanskiy2023entanglement ; schupp2021interface ; benedikter2017cavity ; junge2013strong ; jensen2014cavity ; barclay2009coherent ; krutyanskiy2023telecom ; keller2004calcium ; liu2012optogenetic ; casabone2013heralded . The fiber Fabry–Pérot cavity (FFPC), serving as an open microcavity, provides a compact and highly integrable platform for light–matter interaction. Owing to its fiber-coupled interfaces, photons can be directly collected and transmitted through optical fibers. The reduced mode volume enhances the coupling strength between the ion and the cavity field, thereby facilitating high-bandwidth quantum repeater implementation. Advances in microfabrication techniques hunger2010fiber have enabled successful coupling of diverse emitters to FFPC, including nitrogen–vacancy (NV) and silicon–vacancy (SiV) albrecht2014narrow ; janitz2020cavity ; haussler2019diamond , quantum dots miguel2013cavity , neutral atoms kato2015strong ; gallego2018strong ; uphoff2016integrated ; wang2024ultrafast ; wang2025purcell ; niemietz2021nondestructive , and trapped ions teller2023integrating ; takahashi2020strong ; ballance2017cavity . Among these, trapped ions stand out as excellent stationary qubits with long coherence time and high-fidelity control wang2021single ; sotirova2024high ; erickson2022high , while being stable trapping without reloading. Ion–FFPC integrated system (IFIS) thus combines the ions’ superior coherence and controllability with efficient light collection and scalable interfacing, providing a promising route toward quantum network nodes with high efficiency. However, two main challenges arise in the IFIS: (i) stray ultraviolet light causes charge accumulation on the fiber surface mirror harlander2010trapped , leading to ion-trapping instability brandstatter2013integrated ; and (ii) the nearby dielectric mirrors can increase the ion heating rate by several orders of magnitude teller2021heating . A common approach is to surround the fiber with a metallic shield, such as a metal tube, which has enabled stable ion–cavity coupling steiner2013single ; takahashi2013integrated ; takahashi2017cavity ; takahashi2020strong ; christoforou2020enhanced ; fernandez2021fully ; steiner2014photon ; ballance2017cavity . Nevertheless, this approach still faces several practical challenges, including limited fiber alignment precision kassa2018precise . Here, we present a fabrication technique for metal-shielded fiber-cavity mirrors that preserves optical transmission at the fiber end face while forming a metallic mask on both the fiber side and the outer annular region of the end face to maximize shielding. Compared with the metal-tube method kassa2025integrate , our design exposes a smaller fiber area, providing stronger suppression of electric-field noise. Moreover, the gold layer exhibits excellent thickness uniformity and reproducibility, enabling fiber alignment with precision on the order of a few micrometers. We demonstrate that this structure effectively reduces charge accumulation and significantly suppresses dielectric-induced ion heating, as confirmed by finite-element simulations following teller2021heating . We further characterized the cavity finesse before and after processing, finding negligible degradation for cavity lengths up to 150\>\mu\text{m} and acceptable performance at 250\>\mu\text{m} . Using this fiber electrode in a needle-trap system, we have achieved stable single-ion trapping. The measured heating rate is consistent with the simulation results. II Design and Simulation In the IFIS, the FFPCs primarily influence the trapped ions in two key ways: (i) the accumulation of positive charge on the fiber surface due to photoelectric effect, and (ii) the presence of nearby dielectric layers can significantly increase the ion heating rate. In the following sections, we model and analyze each of these effects separately, and discuss how our process mitigates both issues. II.1 light-induced charge Since the cooling and ionization light for the majority of ions is ultraviolet or near-ultraviolet, irradiation on the optical fiber surface induces the photoelectric effect, causing electrons to be emitted from the valence band of the SiO2 material on the fiber surface, leading to the accumulation of positive charge. Due to the fiber’s extremely low electrical conductivity ( 10^{-14}\sim 10^{-18}\text{ S/m} ), the accumulated positive charges cannot be efficiently conducted away, leading to continuous charge buildup on the fiber surface. As the charge accumulates, the electrical potential on the fiber surface increases. Although the fiber has very low conductivity, it is not entirely non-conductive. As the electrical potential on the fiber surface rises, the current needed to conduct away the accumulated charge also increases. Once this current reaches a balance with the rate at which charge accumulates, a dynamic equilibrium is reached, and the charge accumulation on the fiber surface ceases. Assuming that scattered ultraviolet light is uniformly distributed in space, the irradiance on the fiber surface per unit area is constant, meaning the rate of positive charge generation per unit area is also constant. This rate can be expressed as a surface current density i^{+} . The total current is then given by I^{+}=\iint_{S}i^{+}\,\mathrm{d}\sigma , where S represents the total exposed surface area of the fiber. Based on measurements in ong2020probing , it takes approximately one week for the fiber to accumulate charge up to 4\>\text{e}\!\cdot\!\mu\text{m}^{-2} , leading to an estimated surface current density of i^{+}\sim 10^{-12}\mathrm{A\!\cdot\!m^{2}} . Three scenarios are considered: no shielding, the fiber is enclosed in a metal tube, and the fiber’s end face center is exposed, as illustrated in Fig. 1 . In Fig. 1 (a), both the fiber’s end face and side surfaces accumulate charge, and these charges can only be conducted away through the long fiber, resulting in a significant resistance. Additionally, the larger exposed surface area leads to a higher current I^{+} , which causes the electrical potential on the fiber surface to rise substantially. In Fig. 1 (b), the fiber is enclosed in a metal tube, with the fiber fixed within the tube using optical thermosetting adhesive. This configuration ensures that no charging occurs on the fiber’s side and accelerates the dissipation of accumulated charges from the fiber surface, as they no longer need to traverse the long fiber. As a result, the electrical potential on the fiber surface decreases by several orders of magnitude

Read the complete text