Positive Feedback Drives Sharp Swelling of Polymer Brushes near Saturation

Simon Schubotz, Eva Bittrich, Holger Merlitz, Quinn A. Besford, Petra Uhlmann, Jens-Uwe Sommer, Günter K. Auernhammer · 2025

Read Positive Feedback Drives Sharp Swelling of Polymer Brushes near Saturation by Simon Schubotz, Eva Bittrich, Holger Merlitz, Quinn A. Besford, Petra Uhlmann, Jens-Uwe Sommer, Günter K. Auernhammer (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-24716.txt.

Introduction

Simon Schubotz, Eva Bittrich, Holger Merlitz, Quinn A Besford, Petra Uhlmann, Jens-Uwe Sommer, and Gunter K Auernhammer solve a long puzzle on how polymer brushes swell in damp air. Such brushes are dense chains fixed to a base, used in coats and sensors. Past reads said they swell less in steam than in liquid, a gap called the Schroder paradox.

At full damp, their tests show brush swell does match the liquid state. A sharp rise starts once damp passes a high mark just short of full. Their new field model pins the rise on a loop: more swell makes the fluid mix better, which drives yet more swell. The model also nails a wet shift in drop tests.

Catalog record

CREATORSimon Schubotz, Eva Bittrich, Holger Merlitz, Quinn A. Besford, Petra Uhlmann, Jens-Uwe Sommer, Günter K. Auernhammer
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-24716

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Positive Feedback Drives Sharp Swelling of Polymer Brushes near Saturation Preprint: APS/123-QED Simon Schubotz, Eva Bittrich, Holger Merlitz, Quinn A. Besford, Petra Uhlmann, Jens-Uwe Sommer, Günter K. Auernhammer Abstract We resolve the Schröder paradox for PNiPAAm brushes, showing experimentally that swelling at 100% relative humidity (RH) matches the liquid state. This occurs via a sharp increase in swelling above 98% RH, a behavior standard models fail to explain. Our extended mean-field theory explains this via a positive feedback between swelling and solvent quality, driven by a concentration-dependent χ \chi parameter. The swelling isotherm quantitatively predicts the dynamic wetting crossover: the advancing contact angle at high velocities drops sharply as ambient humidity surpasses the 98% RH threshold. Polymers can respond to a variety of stimuli, such as pH Kuhn et al. 1950 ; Karg et al. 2008 , temperature Taylor and Cerankowski 1975 ; Akiyama et al. 2004 ; Plamper and Richtering 2017 , light Kollarigowda et al. 2017 ; Ishihara et al. 1984 ; Groten et al. 2012 and many others Heskins and Guillet 1968 ; Stuart et al. 2010 ; GIL and HUDSON 2004 . This sensitivity makes them ideal candidates for coatings to control processes like cell adhesion Akiyama et al. 2004 or antifouling Magin et al. 2010 ; Demirci et al. 2017 and applications like filtration Belfort et al. 1994 ; Zhou et al. 2018 , drug delivery Qiu and Park 2001 , sensing Islam et al. 2015 ; Schönberg et al. 2016 , or others Chen et al. 2010 ; Poppinga et al. 2017 ; Galaev 1999 . Thin polymer coatings can be produced by end-grafting polymer chains onto a surface de Gennes 1980 ; MILNER 1991 , where the long polymer chains are grafted so densely that steric interactions forces the chains entropically away from the surface, referred to as a polymer brush. Similarly to bulk polymers, polymer brushes swell when in contact with solvents Brown et al. 1990 ; Wittmer et al. 1994 ; Tsujii et al. 2006 ; Advincula et al. 2004 . From a theoretical standpoint, the driving force for the polymers’ response is the chemical potential; thus, in a fully saturated gas phase, the response should be the same as in liquid Birshtein and Lyatskaya 1994a ; Ritsema van Eck et al. 2022a . In 1903, Schröder observed that gels swell more in liquid than in a “completely” saturated gas phase. Since then, a difference between swelling in liquid and swelling in a saturated gas phase is often observed Chen et al. 2023 . However, these observations are also controversially discussed Onishi et al. 2007 ; Beers et al. 2014 ; Jeck et al. 2011 . Various solutions have been proposed to resolve this controversy: possible heterogeneities in the material should be taken into account Vallieres et al. 2006 ; Eikerling and Berg 2011 , strong changes near absolute saturation Beers et al. 2014 make extrapolations tricky, and surface contributions to free energy Hartmann et al. 2024 should be considered. Using stimuli-responsive polymers, like poly(N-isopropylacrylamide) (PNiPAAm) Kubota et al. 1990 , gives polymer brushes with pronounced responsiveness Bittrich et al. 2012 ; Plamper and Richtering 2017 . Most commonly, temperature is used as external trigger. PNiPAAm chains in aqueous solution collapse above a critical temperature called the lower critical solution temperature (LCST). The LCST depends on the polymer concentration in solution Afroze et al. 2000 ; Halperin et al. 2015 . This behavior can be modeled using the Flory-Huggins approach, with an interaction parameter varying with polymer concentration Afroze et al. 2000 . Whereas the properties of such brushes in full contact with a liquid have been studied in detail, only recently, studies have been reported of partially wetted polymer brushes, i.e., of brushes wetted by single drops Butt et al. 2018 ; Hartmann et al. 2024 . One and the same brush can have different wetting properties Schubotz et al. 2021 ; Sychev et al. 2023 , which can be controlled via the vapor phase Schubotz et al. 2023 ; Diekmann and Thiele 2024 , or the wetting history Schubotz et al. 2021 . For partially wetted brushes, there is a gradual increase in vapor saturation to full saturation near the drop, leading to brush swelling around the drop, creating a halo Kap et al. 2023 ; Besford et al. 2022a ; Besford et al. 2022b . Since at the free surface of a drop the surrounding atmosphere is fully saturated, the response of polymer coatings to the full range of relative humidities (RHs) is relevant. In studies performed in the vapor phase, the response was significantly less as full saturation was not reached Biesalski and Rühe 2000 ; Ritsema van Eck et al. 2022b . This behavior is an example of adaptive wetting, where the substrate’s properties change in response to the liquid Butt et al. 2018 . In this Letter, we address the century-old Schröder paradox by investigating the thermodynamic response of PNiPAAm brushes to a vapor phase. Using a novel setup for precise control of RH and with that chemical potential, we resolve the paradox by measuring the full swelling isotherm up to 100% relative humidity (RH). We find that swelling in a fully saturated vapor matches the liquid state but occurs via a sharp continuous increase concentrated above 98% RH. This behavior is not captured by standard mean-field theory. Because of this, we extend the mean-field model by a concentration-dependent \chi parameter, determined directly from our experimental data, which reveals a positive feedback loop between swelling and solvent quality. This sharp increase in equilibrium swelling is directly mirrored in the dynamic wetting, creating a velocity-dependent crossover: at high speeds, the advancing contact angle is governed by ambient humidity, while at low speeds, it is dictated solely by the droplet’s local vapor halo, which in close proximity to the contact line is nearly independent of the ambient. We build on our methods described previously Schubotz et al. 2023 . For consistency, we give only a brief summary here; full experimental details are provided in the Supplemental Material (SM) SM , Sec. S1. Polymer brushes were synthesized on silicon using the grafting-to method, resulting in a dry thickness of about 10\text{\,}\mathrm{nm} . We determined the brush thickness with a ellipsometer, on which we use a custom-built cell that can be filled with liquid or vapor to vary conditions. The resulting data were determined by a box model using CompleteEASE software (J. A. Woollam Co. Inc.). To control the temperature when measuring in various vapor concentrations, the entire ellipsometer is placed in the climate chamber, the LHU-113 (ESPEC North America, Inc., in Hudsonville, MI, US) with a temperature accuracy of 0.5\text{\,}\mathrm{\SIUnitSymbolCelsius} . For RHs in the range of 10\text{\,}\mathrm{\%}90\text{\,}\mathrm{\%} , we used appropriate mixtures of dry and saturated nitrogen flux through the measurement cell. RH and temperature are measured with the HYT 939 sensor (ist AG, Switzerland), which operates from 0(1.8)\text{\,}\%100(1.8)\text{\,}\% RH and -40(0.2)\text{\,}\mathrm{\SIUnitSymbolCelsius}125(0.2)\text{\,}\mathrm{\SIUnitSymbolCelsius} . Data is read using the HYT module Evalkit (iST AG, Switzerland) and saved to a CSV file via a Python script. The sensor is integrated into the 3D-printed lid that seals the ellipsometer cell. Data from all devices is merged and processed using an

Read the complete text