Adaptive-twist Soft Finger Mechanism for Grasping by Wrapping
Hiroki Ishikawa, Kyosuke Ishibashi, Ko Yamamoto, Member, IEEE · 2025
Read Adaptive-twist Soft Finger Mechanism for Grasping by Wrapping by Hiroki Ishikawa, Kyosuke Ishibashi, Ko Yamamoto, Member, IEEE (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-23963.txt.
Introduction
Hiroki Ishikawa and two co-authors build a soft robot finger that twists as it bends, so it can wrap around objects and lift them out of clutter. Picking one item from a dense bin demands a finger that slips into narrow gaps, which requires twisting both in its plane and out of it. After insertion, the finger must press with the right normal force while holding the twisted shape — a combination the authors call grasping by wrapping.
Both abilities run off a single actuation source, thanks to a variable stiffness mechanism whose stiffness rises with pressure. The team ran finite element analysis on the design and fixed its parameters from the results. A built prototype then demonstrated the idea in basic experiments, grasping a variety of objects. The work targets the messy case that defeats rigid grippers: mixed piles where the target is wedged between neighbors.
Catalog record
| CREATOR | Hiroki Ishikawa, Kyosuke Ishibashi, Ko Yamamoto, Member, IEEE |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 32 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-23963
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Adaptive-twist Soft Finger Mechanism for Grasping by Wrapping Hiroki Ishikawa, Kyosuke Ishibashi, Ko Yamamoto, Member, IEEE Abstract This paper presents a soft robot finger capable of adaptive-twist deformation to grasp objects by wrapping them. For a soft hand to grasp and pick-up one object from densely contained multiple objects, a soft finger requires the adaptive-twist deformation function in both in-plane and out-of-plane directions. The function allows the finger to be inserted deeply into a limited gap among objects. Once inserted, the soft finger requires appropriate control of grasping force normal to contact surface, thereby maintaining the twisted deformation. In this paper, we refer to this type of grasping as grasping by wrapping . To achieve these two functions by a single actuation source, we propose a variable stiffness mechanism that can adaptively change the stiffness as the pressure is higher. We conduct a finite element analysis (FEA) on the proposed mechanism and determine its design parameter based on the FEA result. Using the developed soft finger, we report basic experimental results and demonstrations on grasping various objects. I Introduction There is great demand for task automation across industries, especially in the agricultural and food industries, because of constantly shrinking work-age population. In a vegetable factory, for example, the task of picking and transportation of large and heavy vegetables, such as cabbage, is manually performed, which places a heavy burden on workers. Soft robotic hands [ 1 ] have many potential applications owing to their adaptability, including in food manipulation [ 2 , 3 ] . Lightweight food items including vegetables require soft and gentle grasping and manipulation, which are the key features of a soft robotic hand. There are several actuation methods for soft robots, including wire-driven systems [ 4 , 5 , 6 ] , the use of shape-memory alloys [ 7 , 6 ] , pneumatics [ 8 , 9 ] and hydraulics [ 10 ] . In particular, hydraulic actuation allows for higher pressure and stiffness, which is suitable for manipulating a large and heavy vegetables [ 10 ] . Fig. 1: (a) A soft finger that only allows in-plane deformation. As shown, it is sometimes difficult to insert all fingers into unequal gap spaces among densely contained objects. (b) A soft finger that also allows out-of-plane directions can be easily inserted into gap spaces by adaptively-twisting deformation. (a) (b) (c) Fig. 2: Concept of grasping by wrapping and the developed soft finger. Figure 1 shows a soft hand grasping and picking up an object from densely contained multiple objects. One example is the picking task of large and heavy cabbages that are densely contained in a box, as seen in a vegetable factory. A long and thin finger is suitable for a soft hand performing this task because it can be deeply inserted into limited gaps among objects. However, the randomness of number, position and size of gaps complicates the task. For example, Fig. 1 shows a case in which a soft hand has three fingers equally aligned whereas there are five gaps that are not equally spaced. To adapt to such a situation, a soft robot requires the following functions: 1. A finger should be able to adapt to the location of a gap. A soft finger with in-plane directional softness (in the xz plane shown in Fig. 1 (a)) has low adaptability for unequally-spaced gaps. However, a finger with at least two-directional softness as shown in Fig. 1 (b), which is usually referred to as out-of-plane motion, can adapt to this situation by twisting deformation in the three-dimensional space. 2. Once inserted, the soft finger requires appropriate control of grasping force normal to contact surface, as shown in Fig. 2a , while maintaining the twisted deformation. In this study, we refer to this type of grasping as grasping by wrapping . If a soft finger has a flexibility in directions tangential to the contact surface, the actuation force is not directly converted to the grasping force in the normal direction. Therefore, a soft finger should be rigid in the tangential direction while grasping an object, as shown in Fig. 2b . According to the basic principle of soft robot actuation, deformation in the desired directions is extracted from the expansion of the soft material with the other directions constrained [ 11 ] . Usually, the number of deformable directions is equal to that of the actuation sources, which ensures that the actuation force is directly transformed into deformation. Therefore, the aforementioned two functions can be achieved by multiple actuation sources, which usually requires a complicated structure consisting of multiple flow paths or chambers corresponding to the number of actuation sources [ 12 ] . However, the control algorithm for grasping by wrapping is complicated. In particular, it is difficult to fabricate such a complicated shape using materials with a high tensile strength, such as nitrile-butadiene rubber (NBR), when using hydraulics to generate a pressure of several MPa [ 10 ] . A system with a single actuation source simplifies the control algorithm, is suitable for simple shapes made of high-tensile-strength materials, and downsizes the total system. Numerous studies have employ a single actuation source, allowing an in-plane motion [ 13 ] or limiting out-of-plane motion through the use of a specific structure [ 14 , 10 ] or optimization of design parameters [ 15 , 16 ] . The actuation force can be directly transformed into the deformation; however, flexibility and adaptability in the out-of-plane directions are sacrificed. In this study, we developed a soft finger capable of adaptive-twist deformation and grasping-by-wrapping function using a single actuation source. To achieve these two functions by a single actuation source, we propose a variable stiffness mechanism that can adaptively change the stiffness as the pressure becomes higher. Although variable stiffness mechanisms have been proposed in the literature, including the jamming mechanism [ 17 ] and lock mechanism [ 18 ] , these studies mainly focused on variable stiffness in a single bending direction. Other studies [ 19 , 20 ] required multiple actuation sources. Therefore, we propose a simple self-locking mechanism for the expansion of soft materials. We determined a design parameter of the proposed mechanism based on a finite element analysis (FEA) result. Basic experimental results and demonstrations of various objects being grasped are reported. The rest of this paper is organized as follows. Section II presents the structure of the proposed soft finger. Then, Section III describes the design and fabrication of the proposed finger, including the parameter design based on the FEA and the validation of the FEA result by an experiment. Section IV reports the experimental results obtained using the three fingered soft hand, demonstrating that various objects can be grasped. We also conducted an experiment involving the picking task in a vegetable factory. Finally, Section V discusses the findings, and Section VI summarizes the obtained results and concludes this paper. II Soft Finger for Grasping by Wrapping Fig. 3: (a) Developed soft finger and (b) its structure. The finger consists of a rubber tube and an exoskeleton that converts internal pressure into desired finger movements, as shown in (c). Fig. 4: 2-DOF joint unit in the exoskeleton, which enables adaptive-twist deformation