Thickness dependent rare earth segregation in magnetron deposited NdCo 4.6 thin films studied by Xray reflectivity and Hard Xray photoemission
J. Díaz, 1,2, J. Rodríguez-Fernández, 1,2, J. Rubio-Zuazo, 3,4 · 2025
Read Thickness dependent rare earth segregation in magnetron deposited NdCo 4.6 thin films studied by Xray reflectivity and Hard Xray photoemission by J. Díaz, 1,2, J. Rodríguez-Fernández, 1,2, J. Rubio-Zuazo, 3,4 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-23852.txt.
Introduction
J. Díaz and two co-authors investigate why thin films of a neodymium-cobalt alloy flip their preference as they grow thicker. In these rare-earth transition-metal films, magnetization points in the plane for thin layers but stands perpendicular above forty nanometers. The story blames rare-earth atoms sitting in lopsided environments, yet what creates those environments was unclear.
Using X-ray reflectivity and hard X-ray photoemission on films from five to sixty-five nanometers, the team tracked composition near the surface. A layer grows between the cap and the film as thickness rises, and the cobalt share near the surface stays below the recipe. The reading: neodymium segregates to the surface in a layer two to three nanometers thick, more strongly in thicker films. Squeezing neodymium into the cobalt lattice costs strain energy, and shedding it favors the lopsided sites that produce perpendicular anisotropy.
Catalog record
| CREATOR | J. Díaz, 1,2, J. Rodríguez-Fernández, 1,2, J. Rubio-Zuazo, 3,4 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 45 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-23852
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Thickness dependent rare earth segregation in magnetron deposited NdCo 4.6 thin films studied by Xray reflectivity and Hard Xray photoemission J. Díaz, 1,2, J. Rodríguez-Fernández, 1,2, J. Rubio-Zuazo, 3,4 Abstract The magnetic anisotropy of amorphous NdCo 4.6 compounds deposited by magnetron sputtering change with film thickness from in plane to out of plane anisotropy at thickness above 40 nm. Xray reflectivity measurements shows the progressive formation of an additional layer in between the 3 nm thick Si capping layer and the NdCo compound film. Hard Xray Photoemission spectroscoy (HAXPES) was used to analyze the composition and distribution of cobalt and neodymium at the top layers region of NdCo 4.6 films of thickness ranging from 5 nm to 65 nm using 7 keV, 10 keV and 13 keV incident photon energies, with inelastic electron mean free paths ranging from 7.2 nm to 12.3 nm in cobalt. The atomic cobalt concentration of the alloy deduced from HAXPES measurements at the Nd 3d and Co 2p excitations results to be below the nominal value, changing with thickness and incident photon energy. This proves a segregation of the rare earth at the surface of the NdCo 4.6 thin film which increases with thickness. The analysis of the background of the Co 2p and Nd 3d peaks was consistent with this conclusion. This demonstrates that neodymium incorporation in the cobalt lattice have a cost in energy which can be associated to strain due to the difference in volume between the two elements. The lowering of this strain energy will favor atomic anisotropic environments for neodymium that explains the perpendicular anisotropy and its thickness dependence of these NdCo compound films. I INTRODUCTION Amorphous NdCo 4.6 is a ferromagnetic intermetallic rare earth-transition metal (RE-TM) compound with a modest perpendicular magnetic anisotropy (PMA) at room temperature (RT), whose anisotropy energy quality factor Q=Ku/4\pi M_{s} is less than 1. This property makes it less anisotropy dominant and more flexible for the implementation in different applications. They are produced at RT and can be stacked or combined with other different materials giving rise to devices with interesting functionalities. Most of them are based on the stripe magnetic domains formed in thin films which have interesting properties like well defined constant period, reconfigurable orientation, rotatable anisotropy Fujiwara et al. 1964 and topological textured features Hierro-Rodríguez et al. 2020 . This compound is used, for instance, in bidimensional array composites with tunable exchange bias effect Hierro-Rodriguez et al. 2014 , in reconfigurable magnonic devices Markó et al. 2019 ; Szulc et al. 2022 and in domain wall racetracks Fernández et al. 2025 . The PMA of RE-TM compounds is caused by the strong spin-orbit coupled 4f electron of the RE atoms. This orbital is nearly isolated from valence atoms. The magnetic coupling between the spin of the TM and the 4f electrons occurs thanks to the intratomic exchange with their valence 6s and 5d electrons which are spin polarized by the 3d TM electrons Pivetta et al. 2020 . This coupling is weak, in the range of tenths of meV, and competes in energy with the crystal field at the RE Buschow 1977 ; Pivetta et al. 2020 which fixes the orientation of its 4f angular moment defining the anisotropy of the compound. The asymmetry of the RE atomic environment is, therefore, key to understand the PMA properties of the RE-TM alloys Cargill III and Mizoguchi 1978 ; Suzuki et al. 1987 ; Yan et al. 1991 . Structural asymmetry has been demonstrated in other RE-TM compounds like TbFe by difraction Yan et al. 1991 , transmission electron microscopy Kennedy et al. 2024 and Extended Xray Absorption Fine Spectroscopy Harris et al. 1992 ; Díaz et al. 2013 . The understanding of how RE gets into this kind of asymmetric environments is an old problem due to the complexity of the system Fu and Mansuripur 1992 ; Harris and Pokhil 2001 ; Mergel et al. 1993 . But the most accepted explanation for thin films deposited using magnetron sputtering methods, which have relatively low incident adatom energies, is based on lowering the surface energy during thin film growth Hellman 1994 ; Hellman and Gyorgy 1992 . If a majority of RE are in asymmetric environments is because the corresponding adatom locations during growth are the ones that reduces the surface energy the most, creating a structural texture that give rise to the resulting anisotropic environments. Then, to have a control of the PMA and the magnetic properties of the NdCo compounds requires elucidating the parameters that condition the adatom diffusion during thin film growth. The mixing of a transition metal and a rare earth in a solid is conditioned by the large differences in their atomic volume, which is three times lager for neodymium (3.4 \times 10^{-29} m 3 ) than cobalt (1.1 \times 10^{-29} m 3 ). This should cause strain that the system might try to avoid by segregating the larger volume atom Abraham et al. 1979 ; Ruban et al. 1999 . Segregation has been reported in NdCo and in DyCo alloys using Xray magnetic circular dichoism (XMCD) Cid et al. 2017 ; Díaz and Blanco-Roldán 2021 . RE segregation has been also reported in other different RE-TM compounds like TbFeCo Haltz et al. 2018 and GdCo Bergeard et al. 2017 . The consequent gradation in concentration of the RE at the surface has given rise to interesting magnetic effects in ferrimagnetic DyCo compounds Chen et al. 2015 . Interestingly, thickness dependent experiments done in GdCo and TbCo ferrimagnetic compounds using metallic buffer layers have detected magnetic soft o even dead layers at the interface with the substrate Ceballos et al. 2022 ; Suzuki et al. 2023 , what may indicate that RE distribution within the RE-TM compound film could be modify by choosing the right interface. The PMA properties of our NdCo 4.6 are thickness dependent. PMA appears above a threshold thickness of 30 to 40 nm and gradually increases until reaching its saturation value at thickness below 100 nm, indicating that it is built during the growth process of the film. Therefore, surface sensitive techniques applied at different thin films thickness should give information on how PMA is formed. For this study we used X-ray reflectivity (XRR) and HAXPES Panaccione and Kobayashi 2012 ; Panaccione and Kobayashi 2012 . XRR is very sensitive to the layer interfaces and should detect changes in thickness, electron densities and roughness. However, it cannot give the precise nature of the elemental composition of the layers and interfaces without some ambiguity. Electron densities for cobalt and neodymium might not be large enough to be distinguished if there is some intermixing. Photoemission spectroscopies are elemental sensitive probes with probe depths which can be about three times the inelastic electron mean free path ( \lambda_{IMFP} ) of the photoemitted electrons Tanuma et al. 2011 . By using hard Xrays, HAXPES reaches larger probing depths than Xray absorption spectroscopy, when using secondary electron detection Abbate et al. 1992 , or Xray photoemission (XPS). Moreover, its probe depth can be modified by the incident photon energy and/or by choosing the specific excitation peaks Panaccione and Kobayashi 2012 . This allows the study of the composition and