Estimating applied potentials in cold atom lattice simulators
Bhavik Kumar, Daniel Malz · 2025
Read Estimating applied potentials in cold atom lattice simulators by Bhavik Kumar, Daniel Malz (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-23302.txt.
Introduction
Bhavik Kumar and Daniel Malz propose a simple protocol to measure the applied potential at each site of a cold atom lattice simulator. Atoms in optical lattices realize Hubbard models with site-resolved readout, and arbitrary site potentials can in principle be applied. In practice the tight spacing sits below the diffraction limit, so calibrating potentials is hard.
Their protocol measures any potential with high precision using an efficient experimental sequence. Accurate knowledge of the potential is essential before simulator results can be trusted as physics. The method should help labs verify the landscapes they think they imposed.
Catalog record
| CREATOR | Bhavik Kumar, Daniel Malz |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-23302
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Estimating applied potentials in cold atom lattice simulators Bhavik Kumar, Daniel Malz Abstract Cold atoms in optical lattices are a versatile and highly controllable platform for quantum simulation, capable of realizing a broad family of Hubbard models, and allowing site-resolved readout via quantum gas microscopes. In principle, arbitrary site-dependent potentials can also be implemented; however, since lattice spacings are typically below the diffraction limit, precisely applying and calibrating these potentials remains challenging. Here, we propose a simple and efficient experimental protocol that can be used to measure any potential with high precision. The key ingredient in our protocol is the ability in some atomic species to turn off interactions using a Feshbach resonance, which makes the evolution easy to compute. Given this, we demonstrate that collecting snapshots from the time evolution of a known, easily prepared initial state is sufficient to accurately estimate the potential. Our protocol is robust to state preparation errors and uncertainty in the hopping rate. This paves the way toward precision quantum simulation with arbitrary potentials. I Introduction and motivation Cold atom quantum simulators aim to implement paradigmatic models of quantum many-body physics, such as the Bose–Hubbard model with precise microscopic control Bloch et al. 2008 ; Bloch et al. 2012 . A key objective in this context is the ability to realize arbitrary site-dependent optical potentials, that is, to independently tune the on-site energy at each lattice site. Such flexibility enables a broad range of applications in both quantum simulation Feynman 1982 ; Georgescu et al. 2014 and quantum information processing—including neutral-atom qubit arrays where addressable local potentials enable site-selective qubit control, programmable problem Hamiltonians, and atomtronic circuits Weitenberg et al. 2011 ; Seaman et al. 2007 ; Amico et al. 2022 . The capability to sculpt spatially complex potentials renders cold atom platforms highly versatile for the study of disordered systems, many-body localization, thermalization, and exotic far-from-equilibrium phenomena such as the quantum simulation of lattice gauge theories Schreiber et al. 2015 ; Choi et al. 2016 ; Lukin et al. 2019 ; Mark et al. 2023 ; Choi et al. 2023 ; Halimeh et al. 2023 . Moreover, applying spatially-varying quasiperiodic potentials has emerged as a powerful tool for probing rich topological phenomena Roy et al. 2024 ; Lahiri and Basu 2024 . This is why an increasing number of cold-atom experiments incorporate spatial light modulators, digital micromirror devices, or other custom optics to achieve controllable potential landscapes. While a lot of progress has been made towards single-site controllability, it is fundamentally limited by optical diffraction, which means that potentials can only be realized with finite spatial resolution even in state-of-the-art setups Henderson et al. 2009 ; Weitenberg et al. 2011 ; Zupancic et al. 2016 ; Asteria et al. 2021 ; Bakr et al. 2010 . As a result, the following situation arises: the experimenter wishes to apply a certain on-site potential V , but instead they apply the potential W . The difference V-W is constant over many repetitions of the experiment, i.e., it constitutes a bias (and not fluctuating noise). The difference between the expected and actual implemented Hamiltonian will lead to a simulation error that accumulates with time, thus preventing high-precision quantum simulation. v_{0} v_{1} v_{2} v_{3} v_{4} v_{5} QGM C_{ii}(t) Imaging Figure 1: Schematic of an optical lattice formed by counter-propagating lasers, generating periodic wells, with on-site energies v_{i} . The atoms can hop from one site to the next. At the end of the experiment, a quantum gas microscope (QGM) is used to read out the location of all the atoms in the lattice, which yields a snapshot. By running the evolution for different times, we can infer the applied potential from the snapshots. This roadblock can be overcome by learning the Hamiltonian. A sufficiently efficient and robust algorithm to learn the actually implemented potential could also be used to use iterative feedback calibration Koch et al. 2022 , and could be complemented by machine-learning techniques Rosi et al. 2013 ; Cao et al. 2020 ; Reinschmidt et al. 2023 ; Wigley et al. 2016 . There exist a number of proposals to learn Hamiltonians from its dynamics and local measurements Bairey et al. 2019 ; Stilck França et al. 2024 ; Valenti et al. 2022 ; Hincks et al. 2018 ; Yu et al. 2023 ; Haah et al. 2024 ; Li et al. 2020 ; Burgarth and Maruyama 2009 ; Villa et al. 2020 ; Hangleiter et al. 2024 . These typically employ polynomial interpolation techniques or time series data analysis and require state preparation and measurements in many different local bases. They are therefore difficult to implement in ultracold atom setups, where the standard measurement is a quantum-gas microscope, which measures the positions of the atoms and is thus in a fixed basis (the number basis). Recent work has shown that limiting oneself to one measurement basis and fixed Hamiltonians need not necessarily prevent state learning Hu et al. 2023 ; Tran et al. 2023 ; Liu et al. 2024 . Their key insight is that the scrambling dynamics of the simulator can be used to change the measurement basis. One limitation of such an approach is that it often requires one to classically simulate the time evolution of the system, which is difficult for many-body quantum simulators. Several works have thus developed protocols to extract information from non-interacting quantum dynamics using methods such as convex optimization and (random) free-fermion evolution Gluza and Eisert 2021 ; Huang et al. 2020 ; Naldesi et al. 2023 ; Denzler et al. 2024 ; Wan et al. 2023 ; Zhao et al. 2021 ; Wu and Koh 2024 . Motivated by this progress, we present a simple protocol to estimate the applied potential (and the hopping) in analogue cold-atom lattice experiments that unifies all favourable properties of previous schemes: (i) implementable without additional experimental modifications (in particular, no local control), (ii) classically efficient postprocessing, (iii) robustness to errors, (iv) constant time evolution ( <10 hopping times), and (v) low sample complexity. Taken together, these properties ensure that our protocol is scalable to arbitrary system sizes and that it can be implemented directly in a large number of existing experiments. To make our protocol classically efficient, we exploit the ability in certain atomic species to turn off interactions via a Feshbach resonance Mazurenko et al. 2017 ; Chin et al. 2010 ; Bauer et al. 2009 . Our key result is that time-resolved measurement of diagonals of the correlation matrix C_{ii}(t)=\langle c_{i}^{\dagger}(t)c_{i}(t)\rangle provides sufficient information to reconstruct the actual potential landscape. Our scheme is well-suited to analog platforms with native access to particle-number readout, requires only easily preparable initial states such as a charge-density wave, and remains robust to realistic preparation errors. II Setting For simplicity, we consider a spinless free fermion system on a 1D lattice governed by the quadratic Hamiltonian H=h\sum_{i,j}\left(c_{i}^{\dagger}c_{j}+h.c.\right)+\sum_{i}v_{i}c_{i}^{\dagger}c_{i}\eqqcolon\mathbf{c}^{\dagger}\cdot\mathcal{H}\cdot\mathbf{c}, (1) which describes experiments based on cold atoms hopping in an optical lattice. Here, v_{i} are unknown onsite potentials and c_{i} is the annihilation operator acting on site i obeying the canonical anticommutation relations \{c_{i},c_{j}^{\dagger}\}=\delta_{{i},{j}} . We assume that one can prepare a known initial state with correlation matrix C(0) . The system subsequently evolves unitarily