Method for restoring the orientation of ocean bottom seismometers using distant earthquakes records
Oleg V. Ponomarev, Sergey V. Kolesov, Mikhail A. Nosov · 2025
Read Method for restoring the orientation of ocean bottom seismometers using distant earthquakes records by Oleg V. Ponomarev, Sergey V. Kolesov, Mikhail A. Nosov (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-21760.txt.
Introduction
Oleg V. Ponomarev, Sergey V. Kolesov, and Michail A. Nosov recover the lost sense of up and down for seismometers resting on the ocean floor. Instruments lowered to seafloor observatories land at unknown tilts, and every later measurement of ground motion needs that orientation to mean anything, yet no diver can visit to level them.
Their method exploits a direct consequence of Newton's second law. In a certain frequency band, the vertical acceleration of the seafloor tracks the pressure wiggles above it, giving a built-in plumb line from distant earthquakes. Tested on six stations of Japan's S-net during three major quakes, including the 2024 Noto event, the recovered orientations agree with an independent method within about a degree at most stations. The trick serves velocity sensors as well as accelerometers.
Catalog record
| CREATOR | Oleg V. Ponomarev, Sergey V. Kolesov, Mikhail A. Nosov |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-21760
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Method for restoring the orientation of ocean bottom seismometers using distant earthquakes records Oleg V. Ponomarev, Sergey V. Kolesov, Mikhail A. Nosov Abstract A method is presented for determining the vertical direction relative to the axes of seismometers installed in seafloor observatories. The method is based on the linear relationship between the vertical component of seafloor acceleration and pressure variations at the ocean bottom, which follows directly from Newton’s second law and holds within the frequency range of “forced oscillations”. The method’s performance was validated using data from ocean bottom seismometers (accelerometers) and pressure gauges of six S-net stations during three seismic events: Gulf of Alaska M w 7.9 M_{w}7.9 (23.01.2018), Chignik M w 8.2 M_{w}8.2 (29.07.2021) and Noto M w 7.5 M_{w}7.5 (01.01.2024). The results were compared with an independent alternative method, showing discrepancies within 1 ∘ 1^{\circ} for most stations. A key advantage of the proposed method is its applicability not only to accelerometers but as well to velocimeters. keywords seafloor observatory, S-net, ocean-bottom seismometer, pressure gauge, earthquake, sensor testing 1 Introduction The first experiments involving seismic measurements on the ocean floor date back to the first half of the 20th century Ewing and Vine 1938 , while active development of this field began much later — in the 1960s Bradner 1964 . Around the same time, a hydrophysical method for tsunami forecasting was proposed and implemented, based on high precision measurements of pressure variations on the seafloor Soloviev 1968 ; Jaque and Soloviev 1971 . In the early 21st century, the deployment of ocean bottom seismometers (OBS) and pressure gauges (PG) became widespread Suetsugu and Shiobara 2014 ; Rabinovich and Eblé 2015 ; Levin and Nosov 2016 . One of the most well-known continuously operating systems is DART (deep-ocean assessment and reporting of tsunamis, https://nctr.pmel.noaa.gov/Dart/), which consists of approximately 60 autonomous deep-ocean tsunami-meters located at various locations in the World ocean, transmitting sea level information via the hydroacoustic channel and satellite communication Mungov et al. 2013 . Compared to autonomous stations, cabled systems have clear advantages in terms of data volume, transmission speed, and operational lifespan. The largest cabled systems currently in operation are DONET (Dense Oceanfloor Network System for Earthquakes and Tsunamis — 51 stations) Kaneda 2011 and S-net (150 stations) Mochizuki et al. 2018 , both installed in the Pacific Ocean near the Japanese islands. In addition, there are many other systems, such as NEPTUNE (The Canadian North-East Pacific Underwater Networked Experiments) Barnes and Team 2007 , EMSO (European Multidisciplinary Seafloor and Water Column Observatory) Favali and Beranzoli 2009 , MACHO (MArine Cable Hosted Observatory) Hsiao et al. 2014 , among others. Seafloor observatories enable the resolution of numerous important scientific and practical tasks, the foremost of which is obtaining the information about underwater earthquakes and/or tsunamis in close proximity to the source, i.e., in the shortest possible time. The characteristics of signals recorded by OBS and PG during seismic seafloor movements were discussed as early as the late 20th century in works such as Filloux 1983 ; Webb 1998 . A comprehensive physical model, based on advanced theoretical understanding and analysis of synchronous measurements of pressure variations and vertical accelerations of the seafloor, is presented in Bolshakova et al. 2011 ; Levin and Nosov 2016 ; Nosov et al. 2018 . A compressible water layer of depth H is characterized by two characteristic frequencies: f_{g}=0.366\cdot\sqrt{g/H} and f_{ac}=c/(4H) , where c is the speed of sound in water and g is gravitational acceleration. Seismic motions of the seafloor with frequency f<f_{g} generate gravity waves, whereas motions with f>f_{ac} generate hydroacoustic waves. If the seafloor moves within the frequency range f_{g}<f<f_{ac} , neither gravity waves nor hydroacoustic waves are generated, and the water layer undergoes forced oscillations that replicate the motion of the seafloor. In the case of a flat horizontal seafloor, a relationship holds between bottom pressure variations p and the vertical acceleration component a_{v} , which follows directly from Newton’s second law: p=\rho H\cdot a_{v}, (1) where \rho is the vertically averaged water density. The validity of Equation 1 has been confirmed in a number of studies An et al. 2017 ; Matsumoto et al. 2017 ; Iannaccone et al. 2021 ; Nosov et al. 2021 ; Deng et al. 2022 . The strict fulfillment of the relationship 1 enabled the development of the Method for Examining the Performance of Seafloor Observatory Sensors, and in particular, allowed the identification of incorrect calibration of station E18 (DONET) Nosov et al. 2018 ; Karpov et al. 2020 . The practical applications of the relationship 1 are not limited to verifying sensor calibration. It is known that strong, nearby earthquakes can alter the orientation of seismometer axes. Considering the S-net system, the seismometer axes are not aligned with any fixed directions at all Dhakal and Kunugi 2023 . There exists a method for recovering accelerometer axis orientation based on detecting the constant components of acceleration signals due to gravity Takagi et al. 2019 . However, this method is not universal; for example, it cannot be applied to the recovery of velocity sensor axes. The aim of this study is to develop a method for determining the vertical direction relative to the axes of an ocean bottom seismometer based on the relationship 1 . The functionality of the method is demonstrated using data from six S-net stations for the following three earthquakes: Gulf of Alaska M_{w}7.9 (23.01.2018), Chignik M_{w}8.2 (29.07.2021), and Noto M_{w}7.5 (01.01.2024). 2 Method Description Seismometers typically have three orthogonal axes: x , y , and z , oriented toward the east, north, and vertically upward, respectively. However, the actual orientation of these axes may deviate due to errors during the installation of observatories or shifts occurring during operation, caused by strong seismic motions or other factors. The analyzed dataset includes time series of pressure and the three mutually perpendicular acceleration components. According to equation 1 , the application of the method requires the presence of some nonzero dynamic acceleration at the seafloor; therefore, data from periods of earthquake activity are used. It is known that the ability of the earthquake to excite low-frequency seismic waves grows with an increase in magnitude M_{w} Denolle and Shearer 2016 . Therefore, it is important to select earthquakes that are strong enough to produce ocean bottom motions within the range of forced oscillations (for stations at depths H\in[1;\;3]\;km , M_{w}\geq 7.5 Nosov et al. 2021 ). Until this point, the seafloor was assumed to be flat and horizontal. The case of sloped bathymetry was discussed in detail in Nosov et al. 2018 : under real seafloor conditions, horizontal acceleration components also begin to influence pressure variation. However, it was shown that, due to the generally small depth gradients in the real ocean, the normal to the seafloor surface can be assumed to be close to the vertical direction, and the influence of steep underwater slopes can be neglected if they are located outside the range with a radius of 3H . We will define a Cartesian coordinate system 0xyz associated with the seismometer. Let the accelerations along the three orthogonal axes be known: a_{x}(t) , a_{y}(t) , a_{z}(t) . Then, the projection of acceleration onto an