Magnetic Field Configuration of a Quiescent Prominence Revealed by Large-amplitude Longitudinal Oscillations in End-view Observations
Jun Dai, Ayumi Asai, Dechao Song, Ye Qiu, Zhe,Xu · 2025
Read Magnetic Field Configuration of a Quiescent Prominence Revealed by Large-amplitude Longitudinal Oscillations in End-view Observations by Jun Dai, Ayumi Asai, Dechao Song, Ye Qiu, Zhe,Xu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-21487.txt.
Introduction
Jun Dai and four co-authors read the magnetic skeleton of a quiet solar prominence from the way it swayed. A prominence is a cool cloud of gas hanging in the Sun's corona. A collision with a hot neighboring structure set it swinging lengthwise. Two coronal jets were tied to that structure. The swing had a period of about seventy-seven minutes.
The team combines images and spectra taken in end view. They track two signal groups with matched timing. The initial swing spans forty million meters, with speeds near fifty kilometers per second. Two separate methods convert the motion into the bend of the magnetic dips cradling the gas. Both give dip radii growing from ninety to two hundred twenty million meters before shrinking again. The sideways field measures near twenty-five gauss. The dips trace a smooth sinusoidal shape.
Catalog record
| CREATOR | Jun Dai, Ayumi Asai, Dechao Song, Ye Qiu, Zhe,Xu |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-21487
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Magnetic Field Configuration of a Quiescent Prominence Revealed by Large-amplitude Longitudinal Oscillations in End-view Observations Jun Dai, Ayumi Asai, Dechao Song, Ye Qiu, Zhe,Xu Abstract Prominence seismology, applied to the large-amplitude longitudinal oscillation, is used to indirectly diagnose the geometry and strength of the magnetic fields inside the prominence. In this paper, combining imaging and spectroscopic data, the magnetic field configuration of a quiescent prominence is revealed by large-amplitude longitudinal oscillations observed in end view on 2023 December 4. Particularly, the prominence oscillation involved blueshift velocities in Dopplergrams and horizontal motions in extreme-ultraviolet (EUV) images. Originally, the prominence oscillation was triggered by the collision and heating of an adjoining hot structure associated with two coronal jets. The oscillation involved two groups of signals with similar oscillatory parameters, a three-dimensional (3D) initial amplitude of ∼ \sim 40 Mm and a 3D velocity amplitude of ∼ \sim 48 km s -1 , both lasting for ∼ \sim 4 cycles with a period of ∼ \sim 77 minutes, with a phase difference of ∼ π / 4 \sim\pi/4 . While the angle between 3D velocities and the prominence axis ranges from 10 ∘ – 30 ∘ {}^{\circ}\mbox{--}30^{\circ} . Two methods, utilizing time-distance diagrams and velocity fields, are employed to calculate the curvature radius of magnetic dips supporting the prominence materials. Both methods yield similar value ranges and trends from the bottom to the top of magnetic dips, with the curvature radius increasing from ∼ \sim 90 Mm to ∼ \sim 220 Mm, then decreasing to ∼ \sim 10 Mm, with transverse magnetic field strength ≥ \geq 25 Gauss. From this, the realistic 3D geometry of the prominence magnetic dips is determined to be sinusoidal. To the best of our knowledge, we present the first accurate calculation of the 3D curvature radius and geometry of the prominence magnetic dips based on longitudinal oscillatory motions. I Introduction Prominences or filaments are the structural features filled with cool-dense plasma materials suspended in the solar corona ( Labrosse et al. 2010 ; Mackay et al. 2010 ) . The oscillatory motions of prominence are separated into two categories based on the velocity amplitude, including small-amplitude oscillations ( \leq 10 km s -1 ) involved a small volume of prominence materials and large-amplitude oscillations (LAOs; \geq 10-20 km s -1 ) affecting the full prominence or most part of it ( Arregui et al. 2018 , see the review of) . Furthermore, according to the direction, the LAOs of prominence can be divided into large-amplitude transverse oscillations ( Isobe & Tripathi 2006 ; Isobe et al. 2007 , LATOs; e.g.,) and large-amplitude longitudinal oscillations ( Jing et al. 2003 ; Jing et al. 2006 ; Vršnak et al. 2007 , LALOs; e.g.,) . LATOs of prominences are usually considered as a long uniform cylinder oscillating perpendicular to its axis, where the main restoring force is supplied by the magnetic tension force of the prominence ( Kleczek & Kuperus 1969 ) . LATOs are typically triggered by the interaction between Moreton waves ( Eto et al. 2002 ; Asai et al. 2012 ; Liu et al. 2013 ) or EUV waves ( Dai et al. 2012 ; Zhang & Ji 2018 ; Dai et al. 2023 ) sweeping over and squeezing, which transfers kinetic energy. In detail, relative to the plane of the local photosphere, LATOs can be divided into vertical and horizontal oscillations (see the review of Tripathi et al. 2009 ; Arregui et al. 2018 , and references therein) . Based on previous reports, the observational characteristics of the vertical and horizontal LATOs from different viewpoints can be generally summarized as follows: 1. Top-view: when observed on the disk, the line-of-sight (LOS) and plane-of-sky (POS) motions of the whole filament correspond to the nearly vertical ( Okamoto et al. 2004 ; Shen et al. 2014a , e.g.,) and horizontal ( Shen et al. 2017 , e.g.,) oscillations. Among these, the vertical LATOs are accompanied with the ”winking filament” characterized by the alternative appearance and disappearance in H \alpha wing images, resulting from the LOS velocity leading to the Doppler shift from H \alpha center to the line wings. Moreover, when far away from the disk center, 3D projection effects of LATOs and the local photosphere plane are both required to be considered ( Dai et al. 2023 ) . 2. Side-view: when observed on or near the limb, LOS and POS motions correspond to the horizontal ( Isobe & Tripathi 2006 , e.g.,) and vertical ( Kim et al. 2014 ; Zhang et al. 2016 , e.g.,) oscillations. 3. End-view: when observed on the limb, POS motions parallel to the local photospheric plane correspond to the horizontal oscillations ( Liu et al. 2012 ; Gosain & Foullon 2012 , e.g.,) . While the vertical oscillations have not been detected or reported (to our best knowledge), this is probably due to the leg and shoulder of the prominence blocking the oscillating signals. Generally, the prominence materials of LALOs are considered to oscillate along the magnetic dips in the supporting flux rope, where the projected gravity along the dip is dominant for the restoring force. Prominence seismology based on this can effectively estimate the curvature radius and transverse magnetic field strength of the dips ( Luna et al. 2012 ; Zhang et al. 2012 ; Luna & Karpen 2012 ) . LALOs are frequently triggered by solar flares or subflares ( Jing et al. 2003 ; Jing et al. 2006 ; Vršnak et al. 2007 ; Li & Zhang 2012 ; Zhang et al. 2012 ; Zhang et al. 2017a ; Zhang et al. 2020 ) , as well as coronal jets ( Luna et al. 2014 ; Zhang et al. 2017b ; Luna & Moreno-Insertis 2021 ; Ni et al. 2022 ) adjacent to the footpoints of the prominences where the plasma is subjected to evaporation, resulting in hot flow to push the cold-dense materials away from the initial position ( Luna & Karpen 2012 ; Luna et al. 2012 ) , and sometimes are induced by the impact of coronal shock waves in a direction roughly along the prominence axis ( Shen et al. 2014b ; Pant et al. 2016 ; Pan et al. 2025 ) or by the merging of two adjacent filaments ( Luna et al. 2017 ) . Furthermore, in most observational cases ( Luna et al. 2018 ) and 3D scenario ( Zhou et al. 2018 ) , there is a certain angle ( \leq 40^{\circ} ) between the magnetic field of the dips supporting LALOs and the axis of flux ropes. Therefore, the LALOs observed from different viewpoints also appear different distinctions: 1. Top-view: which are most frequently observed on the disk, the materials roughly oscillate along the spine of filaments, but have a certain angle ranging from 10^{\circ} to 30^{\circ} ( Luna et al. 2014 ; Zhang et al. 2017b ; Luna et al. 2018 , e.g.,) . 2. Side-view: which are rarely observed on the limb, the materials also roughly move along the horizontal axis of the prominence ( Zhang et al. 2017a ; Ouyang et al. 2020 , e.g.,) with a slight Doppler shift ( Zapiór et al. 2019