Magneto-optical trapping of zinc
Lukas Möller, Simon Stellmer · 2025
Read Magneto-optical trapping of zinc by Lukas Möller, Simon Stellmer (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-21376.txt.
Introduction
Lukas Möller and Simon Stellmer report the first laser cooling and magneto-optical trapping of zinc atoms. They cool the atoms on a transition in the deep ultraviolet, at a wavelength of 213.9 nanometers, the shortest ever used for this kind of trap, which makes the technical feat notable on its own.
The trap holds every stable isotope of zinc, including a fermionic one whose very narrow transition could anchor an optical atomic clock. The authors map how different settings change the number of trapped atoms and how fast the trap loads. They frame the result as a first step toward using zinc for high-precision spectroscopy, which measures light absorbed or emitted by atoms, and for quantum information work.
Catalog record
| CREATOR | Lukas Möller, Simon Stellmer |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 15 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-21376
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Magneto-optical trapping of zinc Lukas Möller, Simon Stellmer Abstract We report on laser cooling and magneto-optical trapping of atomic zinc. The atoms are cooled using the 213.9 nm 1 S 0 → \rightarrow 1 P 1 transition, making this the shortest wavelength employed for magneto-optical trapping thus far. We demonstrate trapping of all stable isotopes of zinc, including the fermionic isotope 67 Zn, which features a very narrow 1 S 0 → \rightarrow 3 P 0 transition that could form the basis of an optical atomic clock. We characterize the influence of various parameters on the MOT population and loading rate. The results presented here constitute the first step towards the application of zinc for high-precision optical spectroscopy and quantum information processing. The magneto-optical trap (MOT) is one of the most widely used methods in modern atomic physics and usually provides the first cooling stage for optical atomic clocks Ludlow et al. 2015 ; Aeppli et al. 2024 , atom interferometers Poli et al. 2011 ; Abe et al. 2021 ; Tino 2021 ; Ruschewitz et al. 1998 , quantum gas experiments Kraft et al. 2009 ; Stellmer et al. 2009 ; de Escobar et al. 2009 ; Chen et al. 2022 , and various efforts in the field of quantum computation and simulation Daley et al. 2008 ; Madjarov et al. 2020 ; Bloch et al. 2012 ; Schäfer et al. 2020 ; Gorshkov et al. 2010 ; Daley 2011 ; Bluvstein and et al. 2024 . Here, elements with two valence electrons, generally referred to as alkaline earth(-like) metals, enjoy particular attention due to their long-lived metastable states and correspondingly sharp clock transitions. A subgroup of these species are the so-called group-IIB-elements (Zn, Cd, Hg, and Cn). The principal transitions of these elements are situated in the deep ultra-violet (DUV) region of the spectrum. Laser cooling and manipulation of these elements requires the development of powerful, tunable continuous wave (cw), DUV laser systems, which has already been achieved for Cd and Hg Kaneda et al. 2016 ; Yamaguchi et al. 2019 ; Ohmae et al. 2020 ; Bandarupally et al. 2023 ; Gibble 2024 ; McFerran et al. 2012 ; Lavigne et al. 2022 ; Zhang et al. 2022a ; Zhang et al. 2022b . In return, these elements offer very broad dipole transitions for powerful cooling and fast read-out, as well as narrow intercombination lines for second-stage cooling. Their clock transitions are less sensitive to black-body radiation compared to elements typically used for optical lattice clocks, such as Sr and Yb Ludlow et al. 2015 ; Dzuba and Derevianko 2019 . The short wavelengths allow for high spatial resolution in addressing and imaging dense arrays of individual atoms, a technique advantageous in neutral-atom quantum computing. For a long time the shortest wavelength used for magneto-optical trapping was the 229 nm 1 S 0 \rightarrow 1 P 1 transition in Cd Brickman et al. 2007 . This record was recently broken by the magneto-optical trapping of AlF using a 227.5 nm transition Padilla-Castillo et al. 2025 . Zinc, with five stable bosonic isotopes (nuclear spins I=0 ) and one fermionic isotope ( 67 Zn, I=5/2 ), favorably combines many of the properties demanded of elements used in optical clocks, but has received little attention thus far due to the challenges in DUV laser development Wang and Ye 2007 . In this Letter, we present the first magneto-optical trap of atomic zinc. We demonstrate trapping of all five stable isotopes, perform a careful optimization of parameters, and show that ionization losses are not detrimental to laser cooling. Our work represents the first step in the exploration of zinc as a candidate for an optical clock or for quantum information processors. The cooling transition at 213.9 nm makes this the shortest wavelength used for magneto-optical trapping thus far. Figure 1: Partial level diagram of zinc, showing transitions relevant for laser cooling and precision spectroscopy, as well as their wavelengths \lambda and natural linewidths \Gamma/2\pi . For the two states relevant to this work, the hyperfine splitting of the fermionic isotope 67 Zn is shown as wll. Fig. 1 shows a diagram of the relevant transitions. As mentioned above, the DUV transitions of Zn require a powerful and tunable cw laser. Fig. 2 (b) shows a schematic depiction of the laser system.. We use frequency quadrupling of a titanium-sapphire laser (Ti:sapph) to generate the necessary 213.9 nm light. The Ti:sapph is pumped by a frequency-doubled Nd:YAG with 18 W output power, generating 4 W output of NIR light at 855.6 nm, which is first frequency-doubled in a LiB 3 O 5 (LBO) crystal using an enhancement cavity, with an efficiency of >80\% resulting in up to 3.5 W at 427.8 nm. The light is then coupled into a second enhancement cavity containing a BaB 2 O 4 (BBO) crystal. This second cavity uses an elliptical focus at the surface of the BBO crystal to minimize radiation damage while maintaining high conversion efficiencies Gumm et al. 2025 . One mirror of each cavity is mounted to a piezo, allowing the cavity length to be stabilized to the laser frequency via the Hänsch-Couillaud locking scheme Haensch and Couillaud 1980 . This laser system can generate up to 130 mW of output at 213.9 nm. During the measurements presented here, the output power was reduced to about 70 mW to minimize radiation damage to the BBO crystal. Figure 2: (a) Schematic representation of the experimental chamber. (b) Schematic representation of the 214-nm laser system. Due to the elliptical focus of the second enhancement cavity, the UV light is strongly divergent. While this divergence is compensated during beam shaping, the resulting beam is still elliptical, with a waist of 6.3 mm in the major axis and 3.7 mm in the minor. After beam shaping and collimation the beam is split into three parts, which are retro-reflected after passing the experimental chamber, forming the six MOT beams. Losses on the viewports ( \sim 5\% per viewport) lead to a mild power imbalance between counter-propagating beams, which does not impact MOT performance severely. Due to the retro-reflection the light intensity is at the position of the atoms is higher than the input power, which needs to be considered for some of the calculations presented in this paper. For clarity all powers given in this paper are input power, measured before the beam is split into the individual MOT beams. The experimental chamber is depicted in Fig. 2 (a). The main part of the chamber consists of a CF40 cube. Four of the sides are occupied by viewports, the other two by CF40 tubes. One of these tubes connects to a 4-way cross, allowing for the connection to vacuum pumps as well as another viewport. A small oven containing zinc pellets is welded onto the opposite pipe at an acute angle. This oven is heated by a cartridge heater to control the zinc vapor pressure within the cell. The pressure is monitored and maintained at 4\cdot 10^{-8} mbar by an ion pump. The large linewidth of the cooling transition ( \Gamma/2\pi=114 MHz) necessitates a large magnetic field gradient of more than 100 G/cm. A commonly used solution for