A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids

Ahmed Saad Al-Karsani, Maryam Khanbaghi, Aleksandar Zečević · 2025

Read A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids by Ahmed Saad Al-Karsani, Maryam Khanbaghi, Aleksandar Zečević (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-21025.txt.

Introduction

Ahmed Saad Al-Karsani leads two co-authors on a in linked form stable and robust control scheme for standalone networks of small grids. Islanded operation must hold frequency and voltage steady despite variable clean sources and loads, without help from the main grid.

Shared averaging proportional integral control is a known approach for droop controlled resources, but it falters under operational and structural disturbances. The proposed variant aims to keep stability and robustness when lines switch, loads jump, or units drop out. Reliable standalone control underpins resilient local energy systems for campuses, bases, and remote communities.

Catalog record

CREATORAhmed Saad Al-Karsani, Maryam Khanbaghi, Aleksandar Zečević
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE59 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-21025

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids Ahmed Saad Al-Karsani, Maryam Khanbaghi, Aleksandar Zečević Abstract The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode. However, they face challenges in terms of secondary level frequency and voltage regulation, due to the variable nature of Renewable Energy Sources (RES) and loads. Distributed-Averaging Proportional-Integral (DAPI) control has been proposed in the literature for distributed frequency and voltage control of droop-controlled DERs, but it is not robust to operational or structural perturbations. To address this, we propose a robust DAPI frequency and voltage control scheme that ensures robustness using the concept of connective stability, along with the invariant ellipsoid technique for disturbance rejection. Simulation of an NMG model in MATLAB ® /Simulink ® consisting of 3 MGs and 5 DERs validates the effectiveness of the proposed method, and demonstrates that it can successfully mitigate the effects of major disturbances such as cyberattacks. I Introduction The introduction of Renewable Energy Sources (RES) has brought forth a new school of thought regarding the structure of the power grid. Typically, electricity is generated in power plants on a large scale before being transmitted at a high voltage and distributed to the load in a centralized and unidirectional manner. However, due to the adoption of RES at the distribution level, power flow is becoming bidirectional within a distributed structure of small-scale generation sources such as Distributed Energy Resources (DERs). Increased RES usage with their distributed and variable nature, coupled with the effects of climate change, are transforming power grid operation. This transformation is affecting the reliability, robustness and resilience of the grid. To address the grid transformation, the integration of DERs can be leveraged to form Microgrids (MGs), a microcosm of the bulk power grid with local sources and loads. Using suitable control schemes, MGs provide a solution for DER integration with stable grid operation [ 1 ] . One school of thought proposes further leveraging the advantages of MGs by forming Networks of MGs (NMGs), an agglomeration of cyber-physically linked MGs that operate in a coordinated manner. This concept falls under the IEEE 2030 standards definition of smart grid interoperability [ 2 ] . It should be noted that after the outages resulting from Hurricane Maria in 2017, Puerto Rico has undergone large-scale DER integration, leading to an NMG-like structure with increased resiliency compared to individual MGs [ 3 ] . NMGs can operate in grid-connected or islanded modes, safely integrating RES into a large-scale power grid with scalable and resilient operation, especially during extreme scenarios such as blackouts. Hence, NMGs may be considered as a potential catalyst for added robustness, resilience and efficiency [ 1 ] . That said, NMG integration is still in the research and development stages. The operational challenges of NMGs in islanded mode affect robustness and flexibility. Such challenges have necessitated changes to the hierarchical control scheme responsible for stabilization, regulation and energy management of generation sources within NMGs. In this context, hierarchical control refers to a three-layer control scheme at separate timescales, with frequency and voltage stabilization and power sharing at the primary level (within seconds), frequency and voltage regulation at the secondary level (within seconds to minutes) and optimization or energy management at the tertiary level (within minutes to hours). It is important to note, however, that this type of hierarchical control was designed for a centralized, unidirectional, slow-varying and high-inertia bulk power grid. Stabilization and regulation of islanded NMGs under the legacy control schemes may not be able to manage the perturbations resulting from generation and load changes as well as MG connections and disconnections. There are a number of operational differences between NMGs in grid-connected and islanded modes. Since our objective is robust distributed frequency and voltage control, in this study we focus on secondary level control in islanded mode. Primary level control is typically decentralized and based on the well-established droop control technique, with a linear relation between frequency (voltage) and active (reactive) power for proportional power sharing [ 1 , 4 , 5 , 6 ] . There is a growing interest in secondary level control of NMGs, especially under different scenarios, topologies and restrictions. This problem can be addressed by scaling the MG schemes proposed in the literature to be used within NMGs [ 4 , 5 , 6 ] . The aforementioned issues require robust control schemes that consider the sensitivity to imbalances between local generation and load fluctuations, and the sensitivity to cyber-physical topological uncertainties within NMGs [ 7 ] . The UNIFI consortium [ 8 ] proposes a framework for grid-forming Inverter-Based Resources (IBRs) that can provide fast frequency and voltage response to survive disturbances while prioritizing system-wide stability. Moreover, there is also a need to develop flexible distributed control to maintain supply and demand balance during prolonged outages [ 9 ] . In view of that, in this paper we will consider whether it is possible to establish a distributed frequency and voltage control scheme that guarantees NMG-wide robustness with respect to: (1) fluctuations in generation and load at the DER level and (2) topological uncertainties at the NMG cyber-physical level. Before addressing secondary level control within NMGs, it is helpful to describe some of the spatiotemporal challenges facing the hierarchical control of MGs. Regarding the nature of separate timescales in hierarchical control, Dörfler et al. [ 10 ] discussed the potential of real-time hierarchical control to take advantage of fast-paced IBRs. Nonetheless, from a spatial perspective, their proposition of real-time secondary level control schemes would require extensive computational efforts, which would have to be alleviated by distributed control communication architectures. Based on Nawaz et al. ’s [ 11 ] survey on secondary level control of MGs, the most studied secondary level control technique is consensus-based control of DERs within MGs, a form of cooperative control where agents (i.e., DERs) reach an agreement on control signals to regulate frequency and voltage in an equitable manner. Consensus-based control is suitable for influencing global behavior using distributed local controllers that can operate within a short timescale. A popular consensus-based approach at the secondary level is Distributed-Averaging Proportional-Integral (DAPI) control of DERs within MGs. Simpson-Porco et al. [ 12 ] propose primary level droop control and distributed real-time secondary level regulation effectively while maintaining power sharing of droop-controlled DERs. Their cooperative control method was a step towards efficient real-time control that partially recreates the performance of central controllers, such as Automatic Generation Control (AGC), in the aggregate. In terms of distributed secondary level control within NMGs, Zamora and Srivastava [ 13 ] propose a novel multi-layer architecture for frequency and voltage control that works in a wide range of operating points, using modified droop control. However, they only considered grid-connected NMGs. Wang et al. [ 14 ] attempted to bridge the gap between theory and practice by Hardware-in-the-Loop (HIL) simulation of peer-to-peer distributed control of Multi-agent Systems (MAS) within NMGs. Their control scheme is akin to the conventional grid scheme of separate and slower timescales. An issue in real-time distributed control

Read the complete text