A Multiscale Approach for Enhancing Weak Signal Detection

Dixon Vimalajeewa, Ursula U. Müller, Brani Vidakovic · 2025

Read A Multiscale Approach for Enhancing Weak Signal Detection by Dixon Vimalajeewa, Ursula U. Müller, Brani Vidakovic (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-20828.txt.

Introduction

Dixon Vimalajeewa, Ursula U Muller, and Brani Vidakovic improve weak signal detection by joining stochastic resonance with multiscale analysis. Stochastic resonance uses a tuned dose of noise to lift a faint signal over a detector threshold, an idea born in climate modeling.

Classic single threshold detectors suit only steady signals and often need so much noise that complex signal traits get warped. The team builds a double threshold detector from two single units and tests it both on raw data and in a wavelet multiscale view that splits signals by resolution. On simulated and real signals the double design beats single threshold rivals in the raw view, and the multiscale view improves it further.

Catalog record

CREATORDixon Vimalajeewa, Ursula U. Müller, Brani Vidakovic
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE83 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-20828

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Multiscale Approach for Enhancing Weak Signal Detection Dixon Vimalajeewa, Ursula U. Müller, Brani Vidakovic Abstract Stochastic resonance (SR), a phenomenon originally introduced in climate modeling, enhances signal detection by leveraging optimal noise levels within non-linear systems. Traditional SR techniques, mainly based on single-threshold detectors, are limited to signals whose behavior does not depend on time. Often large amounts of noise are needed to detect weak signals, which can distort complex signal characteristics. To address these limitations, this study explores multi-threshold systems and the application of SR in multiscale applications using wavelet transforms. In the multiscale domain signals can be analyzed at different levels of resolution to better understand the underlying dynamics. We propose a double-threshold detection system that integrates two single-threshold detectors to enhance weak signal detection. We evaluate it both in the original data domain and in the multiscale domain using simulated and real-world signals and compare its performance with existing methods. Experimental results demonstrate that, in the original data domain, the proposed double-threshold detector significantly improves weak signal detection compared to conventional single-threshold approaches. Its performance is further improved in the frequency domain, requiring lower noise levels while outperforming existing detection systems. This study advances SR-based detection methodologies by introducing a robust approach to weak signal identification, with potential applications in various disciplines. 1 1 footnotetext: The author Dixon Vimalajeewa is with the Department of Statistics, University of Nebraska Lincoln, Nebraska, USA; Ursula U. Müller and Brani Vidakovic are with the Department of Statistics, Texas A&M University, College Station, Texas, USA. 2 2 footnotetext: ∗ Corresponding author: [email protected] I Introduction The concept of stochastic resonance (SR) was introduced by Benzi et al. [ 1 ] in climate modeling to describe the periodic recurrence of ice ages. The recurrence of ice ages can be explained by a signal, the orbital eccentricity, which alone is too weak to have an effect. It must therefore be assisted by other factors, modeled as noise, which help the signal to switch from one state point to the other. This phenomenon is called “stochastic resonance”. Stochastic resonance can also be applied to enable the detection of signals that are typically too weak for conventional detectors, by artificially adding noise. SR occurs when the signal-to-noise ratio in a non-linear system improves by increasing the noise so that a weak signal becomes detectable. Since its introduction, the concept of stochastic resonance has attracted a lot of attention in many fields, for example in physics, neuroscience and engineering, where it has found various applications [ 2 , 3 , 4 ] . Stochastic resonance enables signal detection from threshold data, i.e. when a noisy signal exceeds one or more thresholds, without requiring a detailed understanding of the system’s underlying dynamics. That is, thresholding creates a discontinuous, piecewise response to an input signal, so the output depends on whether the input exceeds a certain threshold value, allowing SR studies to be conducted independently of specific system characteristics [ 5 ] . Threshold detectors are therefore useful for investigating SR in complex systems. Threshold data can be regarded as pulses that are generated when the input signal surpasses a predefined threshold. At high noise levels, the probability of threshold exceedance can be quite large (up to 50% if the noise distribution is symmetric), whereas at low noise levels it remains close to zero The core principle of SR is to identify an optimal noise level referred to as the “SR point” [ 6 ] , at which the observed threshold exceedances most accurately reflect variations in signal intensity. Introducing this optimal noise level enables the detection of weak signals that would otherwise remain undetectable. Studies also suggest that multi-threshold systems can enhance weak signal detection. (See, e.g., Figure 1 , which illustrates a double-threshold system.) Greenwood et al. [ 7 ] demonstrated for a scenario with standard normal noise, that a single-threshold system retains up to 0.6366 information, while a dual-threshold system increases this retention up to 0.7596. However, a critical challenge of the existing threshold systems is that they are predominantly limited to constant (time-invariant) signals. As a result, their applicability is limited as most of the signals monitored at real-world processes are time-variant. This in turn has increased the demand for advanced threshold detectors capable of detecting time-variant signals. Standard SR techniques often require a large amount of noise, so that more complex signal characteristics cannot be restored. A promising alternative is to implement SR in a different domain, where the requirement for large noise amplitudes is reduced, enabling the recovery of finer signal details. Signals in their multiscale (frequency) domain, obtained by using wavelet transforms, have proven to be effective in enhancing hidden signal properties. More specifically, the strength of wavelet transforms lies in their ability to decompose signals into discrete, time-localized frequency components, meaning they can precisely identify both the frequency content of a signal and the specific time intervals during which these frequencies occur. Through recursive decomposition, only low-frequency (smooth) approximation coefficients are retained, progressively refining the signal’s low-frequency structure at each level [ 8 ] . This process enhances the likelihood of exceeding a given threshold, particularly in higher decomposition levels. Literature, such as [ 9 , 10 ] , illustrates that wavelet transform-based SR systems improve contrast in dark images, outperforming conventional methods like the discrete cosine transform. The existing wavelet transform based SR systems are primarily based on constant signals such as images. The application of wavelet-based SR methods to non-constant (time-varying) signals is little researched, despite their great potential in many practical scenarios. A detailed motivational example that explains the usefulness of wavelets in a communication scenario is provided in Section IV-A . In that scenario, a receiver observes only signal values outside a given band. The use of wavelets can be seen as a preprocessing tool that makes it possible to identify details of the signal with greater accuracy. This study has two primary objectives. First, it aims to highlight the significance of employing SR techniques with multi-threshold systems for detecting time-varying signals. Second, it investigates the application of SR in the multiscale and frequency domains to enhance weak signal detection while reducing the reliance on high noise levels. A key contribution of this study is the development of a novel estimator for double-threshold systems. To assess its effectiveness, we conducted experiments evaluating its ability to detect time-varying weak signals in both the time and frequency domains. The wavelet transform is used to convert signals into the frequency domain. The experiments involve various one-dimensional (1D) and two-dimensional (2D) signals, including both simulated data and commonly used signals. The results demonstrate that the proposed double-threshold detector outperforms standard single-threshold detectors in detecting weak signals. Additionally, its performance improves further, with reduced noise, when applied in the frequency domain. These findings provide new insights into enhancing SR techniques for weak signal detection, contributing to advancements in practical signal processing applications. This paper is structured as follows. In Section II we present the formulation of our problem and derive an estimator designed to detect weak signals using a double-threshold SR system. The performance evaluations are described in Section III while Section III-B presents evaluation outcomes. In Section IV , we examine

Read the complete text