A polygonal Reissner-Mindlin plate element based on the scaled boundary finite element method
Anna Hellers, Mathias Reichle, Sven Klinkel · 2025
Read A polygonal Reissner-Mindlin plate element based on the scaled boundary finite element method by Anna Hellers, Mathias Reichle, Sven Klinkel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-20044.txt.
Introduction
Anna Hellers, Mathias Reichle, and Sven Klinkel present a polygonal plate element for the Reissner-Mindlin plate model based on the scaled boundary finite element method. Unlike the original semi-analytical version, their formulation uses linear shape functions for both the scaling and radial directions. The fully discretized result allows polygonal elements with any number of edges, even shapes that are not star-convex, which simplifies meshing.
To prevent transverse shear locking in the thin-plate limit, they derive an assumed natural strain treatment for these elements. A two-field variational form also lets three-dimensional material laws be used while enforcing plane stress conditions in the weak form. Several numerical examples demonstrate that the element performs as intended.
Catalog record
| CREATOR | Anna Hellers, Mathias Reichle, Sven Klinkel |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 78 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-20044
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A polygonal Reissner-Mindlin plate element based on the scaled boundary finite element method Anna Hellers, Mathias Reichle, Sven Klinkel Abstract In this work, a polygonal Reissner–Mindlin plate element is presented. The formulation is based on a scaled boundary finite element method, where in contrast to the original semi-analytical approach, linear shape functions are introduced for the parametrization of the scaling and the radial direction. This yields a fully discretized formulation, which enables the use of non-star-convex-polygonal elements with an arbitrary number of edges, simplifying the meshing process. To address the common effect of transverse shear locking for low-order Reissner-Mindlin elements in the thin-plate limit, an assumed natural strain approach for application on the polygonal scaled boundary finite elements is derived. Further, a two-field variational formulation is introduced to incorporate three-dimensional material laws. Here the plane stress assumptions are enforced on the weak formulation, facilitating the use of material models defined in three-dimensional continuum while considering the effect of Poisson’s thickness locking. The effectiveness of the proposed formulation is demonstrated in various numerical examples. keywords Scaled Boundary Finite Element Method, Polygonal element, Reissner–Mindlin, Shear locking, Assumed Natural Strains, Voronoi tessellation 1 Introduction Thin plate structures are of wide use in different domains of engineering. Their structural analysis is commonly performed using finite element methods (FEM). In this context, common plate elements are constrained to simple triangular and quadrilateral shapes. This restriction complicates the meshing process, especially in case of complex geometries and local mesh refinements. User intervention is often required, which compromises the computational efficiency Song2018 . Here, polygonal element formulations have proven to be beneficial. They facilitate the automatic handling of hanging nodes, local mesh refinements Zhang2020 and the meshing of a domain with voids or cracks Khoei2015 . The first polygonal shaped elements with linear interpolation functions have been developed after the introduction of the rational Wachspress shape functions Wachspress1971 in 1971. Nowadays, they belong to the polygonal elements based on barycentric coordinates, among which not only rational, but also logarithmic and trigonometric shape functions are used Perumal2018 . Due to their complexity, a higher order quadrature rule is often necessary Nguyen2017 . Ngyuen–Xuan presented in Nguyen2017 polygonal plate elements based on barycentric coordinates. A different approach is used in the Virtual Element Method (VEM), first introduced in 2012 Beirao2012 . VEM based thin plate formulations can be found in Brezzi2013 ; Chinosi2018 ; DAltri2022 . In this method, the shape functions are not explicitly defined. Thus, the displacement field within the element domain is unknown and therefore determined through projection onto a polynomial subspace. This induces the need for stabilization methods to avoid zero energy modes Cangiani2015 . With the Scaled Boundary Finite Element Method (SBFEM) proposed by Song and Wolf in 1997 Song1997 , polygonal elements restricted to star shaped geometries are derived. They stand out by a scale separation of a radial and circumferential direction. Originally, the weak form of equilibrium is only applied along the element boundary, whereas in scaling direction, the strong form is enforced, yielding a semi-analytical formulation. However, the analytical approach in scaling direction poses a significant challenge to solving of nonlinear problems. In Klinkel2019 , a fully discretized SBFEM membrane formulation is presented, which allows an independent definition of shape functions in radial and in circumferential direction and the use of non-star-convex element shapes. An extension to nearly incompressible materials is provided in Sauren2023 . To derive thin plate formulations in SBFEM, Kirchoff-Love plate theory Kirchhoff1850 was used at first Hughes1988 . Formulations relying on this theory require a C 1 -continuity across element boundaries for their shape functions, which complicates the derivations of finite elements Bischoff2018 . Here, Reissner–Mindlin theory Reissner1945 ; Mindlin1951 can be beneficial due to a lower continuity requirement. In difference to Kirchhoff-Love, this theory incorporates transverse shear strains. However, it is known that especially low-order Reissner–Mindlin plate formulations suffer from transverse shear locking if the same shape functions are used for the interpolation of the displacements and the rotations. This results in an overestimation of the stresses, while the deformations are underestimated, which compromises the effectiveness of finite element formulations. Therefore, various remedies have been derived over the years, among which the selective reduced integration method is a first attempt Hughes1977 ; Hughes1978 . Here, transverse shear strains, being the parasitic components, are integrated using a deficient amount of Gauss-points. This leads to a rather simple approach, which successfully removes locking, but reduces the element stability due to zero energy modes Spilker1982 . Batoz et al. followed a different approach which enforces the zero-shear condition at discrete points Batoz1980 . Starting point is a plate formulation which considers transverse shear deformations. Though, the energy related to shear is neglected and the Kirchhoff hypothesis is introduced along the element edges, hence the name discrete Kirchhoff triangle or quadrilateral (DKT, DKQ), depending on the element shape. In 1990, Simo and Rifai proposed an alleviation of locking through enhanced assumed strains (EAS) Simo1990 , where the shear components that cause locking are balanced through enhancement. But, the numerical cost is high compared to other locking remedies, such as the discrete shear gap approach (DSG) Bletzinger2000 . In this framework, the gaps, being the difference between the total and bending deformations, are evaluated at the nodes, where they contain no parasitic terms. Afterwards, they are interpolated over the element domain. Similarities to the assumed natural strain approach (ANS) can be found, see Bletzinger2000 . Originally introduced by Bathe and Dvorkin, for a bilinear quadrilateral finite plate element Bathe1985 , this approach has been widely used for the alleviation of shear locking in plates and shells, such e.g. Lee2010 ; Ko2016 ; Choi2024 . The shear strains are evaluated at the so-called tying points, while the curvature strains are evaluated at the nodes, resulting in a distinctive interpolation of both components. This yields the terminology of Mixed Interpolation of Tensorial Components (MITC). Most of the locking remedies are limited to an application on triangular or quadrilateral element shapes and a shortage of robust remedies for polygonal elements still remains. So far, a polygonal Reissner–Mindlin element formulation has been presented by Nguyen-Xuan and Videla using barycentric coordinates Nguyen2017 ; Videla2019 . Recently, the discrete shear projection method was extended towards an application on arbitrary polygons using polygonal serendipity shape functions Akhila2025 . The transverse shear locking effects are reduced by enforcing Timoshenko’s beam assumptions along the edges of the polygons. Considering the framework of VEM, transverse shear locking can be alleviated through replacement of the rotations in the variational formulation by the transverse shear strains Beirao2017 . In semi-analytical SBFEM, a polygonal element has been derived using the discrete Kirchhoff theory, see Dieringer2011 ; Li2021 . Meanwhile, there remains a lack of thin plate formulations based on Reissner–Mindlin plate theory in the framework of fully-discretized SBFEM. Considering the material laws of plate formulations, they are usually limited to a two dimensional description by enforcement of the plane stress assumptions on the strong form. However, an incorporation of three dimensional laws is of interest, especially in case of more complex material models, since they are usually expressed in 3D -continuum Klinkel2002 . For the incorporation, an enhancement of the thickness strains based on