Flexel ecosystem: simulating mechanical systems from entities with arbitrarily complex mechanical responses

Paul Ducarme a,b , Bart Weber b,c , Martin van Hecke a,d , Johannes T.B. Overvelde a,e a AMOLF, Amsterdam, The Netherlands b Advanced Research Center for Nanolithography, Amsterdam, The Netherlands c Van der Waals–Zeeman Institute, Institute of Physics, Universiteit van Amsterdam, Amsterdam, The Net · 2025

Read Flexel ecosystem: simulating mechanical systems from entities with arbitrarily complex mechanical responses by Paul Ducarme a,b , Bart Weber b,c , Martin van Hecke a,d , Johannes T.B. Overvelde a,e a AMOLF, Amsterdam, The Netherlands b Advanced Research Center for Nanolithography, Amsterdam, The Netherlands c Van der Waals–Zeeman Institute, Institute of Physics, Universiteit van Amsterdam, Amsterdam, The Net (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-19741.txt.

Introduction

Paul Ducarme and three co-authors present flexels, a modeling unit for structures whose response is strongly nonlinear. Buckling, pre-tension, and negative stiffness give structures useful tricks. But finite element simulations of them are costly and clumsy. A flexel extends the idea of a nonlinear spring. Its multi-valued response curves capture a compound part's whole mechanical behavior in a single unit.

With flexels, stretching, bending, contact, air-driven motion, and cable-driven motion can all be modeled and combined. The team simulates pre-stressed tensegrities, tape-spring mechanisms, pairs of buckled beams, and a soft air gripper, each with just a few units. The framework ships as an easy Python library for exploring nonlinear mechanical designs fast.

Catalog record

CREATORPaul Ducarme a,b , Bart Weber b,c , Martin van Hecke a,d , Johannes T.B. Overvelde a,e a AMOLF, Amsterdam, The Netherlands b Advanced Research Center for Nanolithography, Amsterdam, The Netherlands c Van der Waals–Zeeman Institute, Institute of Physics, Universiteit van Amsterdam, Amsterdam, The Net
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-19741

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Flexel ecosystem: simulating mechanical systems from entities with arbitrarily complex mechanical responses Paul Ducarme a,b , Bart Weber b,c , Martin van Hecke a,d , Johannes T.B. Overvelde a,e a AMOLF, Amsterdam, The Netherlands b Advanced Research Center for Nanolithography, Amsterdam, The Netherlands c Van der Waals–Zeeman Institute, Institute of Physics, Universiteit van Amsterdam, Amsterdam, The Netherlands d Huygens-Kamerlingh Onnes Lab, Leiden Institute of Physics, Universiteit Leiden, The Netherlands e Institute for Complex Molecular Systems and Department of Mechanical Engineering, Technische Universiteit Eindhoven, Eindhoven, The Netherlands Abstract Nonlinearities and instabilities in mechanical structures have shown great promise for embedding advanced functionalities. However, simulating structures subject to nonlinearities can be challenging due to the complexity of their behavior, such as large shape changes, effect of pre-tension, negative stiffness and instabilities. While traditional finite element analysis is capable of simulating a specific nonlinear structure quantitatively, it can be costly and cumbersome to use due to the high number of degrees of freedom involved. We propose a framework to facilitate the exploration of highly nonlinear structures under quasistatic conditions. In our framework, models are simplified by introducing ‘flexels’, elements capable of intrinsically representing the complex mechanical responses of compound structures. By extending the concept of nonlinear springs, flexels can be characterized by multi-valued response curves, and model various mechanical deformations, interactions and stimuli, e.g., stretching, bending, contact, pneumatic actuation, and cable-driven actuation. We demonstrate that the versatility of the formulation allows to model and simulate, with just a few elements, complex mechanical systems such as pre-stressed tensegrities, tape spring mechanisms, interaction of buckled beams and pneumatic soft gripper actuated using a metafluid. With the implementation of the framework in an easy-to-use Python library, we believe that the flexel formulation will provide a useful modeling approach for understanding and designing nonlinear mechanical structures. 1 Introduction These last years have garnered a significant interest in understanding how to leverage large deformation, nonlinearities and instabilities to design structures capable of complex yet functional mechanical responses [ 1 , 2 ] . For example, compliant mechanisms leverage flexibility to mimic conventional mechanism usually composed of many stiff components connected by joints [ 3 ] . Soft robots utilize shape changes to be intrinsically more robust, adaptable and autonomous, often by harnessing mechanical instabilities to embed sequenced [ 4 ] , asymmetric [ 5 ] , fast [ 6 ] or amplified [ 7 ] actuation. Recent progress in mechanical metamaterials have exploited large geometric changes and nonlinearities to achieve increasingly complex deformation pathways, enabling multistability [ 8 ] or high energy dissipation [ 9 ] . While the advancements driven by the exploitation of nonlinearities increase the capabilities of these fields, they also introduce new challenges for simulation and design. Whereas numerically studying structures in their small-deformation regime follows established approaches given their linear responses, studying a structure subject to large geometric changes is more challenging due to the nonlinearities involved. Nonlinear finite element analyses suffer from limitations that make them less applicable for conceptual design, and do not always contribute to the understanding of systems that undergo large deformation and instabilities. For example, due to the high number of degrees of freedom involved, they can have prohibitive computational costs, fail upon facing mechanical instabilities or distorted meshes, and act as black boxes that are challenging to gain insight from. To cope with these difficulties, reduced-order models that are characterized by fewer degrees of freedom offer a more practical alternative to finite element analyses. They are easier to define, solve, and interpret by promoting qualitative understanding over quantitative accuracy. They usually employ fewer elements which together are still able to capture the qualitative phenomenology. For example, the pseudo-rigid body model uses a combination of rigid links and torsional springs to represent flexible, slender parts [ 3 ] . Trusses of bars can be used to model and even inverse design multistable compliant structures [ 10 ] . Cosserat rods have shown great promise for modeling soft robotic [ 11 ] or soft living [ 12 ] systems. Simple spring or beam models that can be expressed analytically have been valuable in gaining insight into a wide variety of geometrically nonlinear mechanical structures [ 13 , 14 , 15 , 16 , 17 , 18 , 19 ] . Essentially, such existing approaches aim for a higher-level description of the mechanical system. Instead of describing the system as a mesh of many material elements, combining fewer abstract components allows to construct models that are cheaper to solve and easier to understand. However, strongly nonlinear mechanical behaviors such as nonmonotonic or multi-valued force-deformation paths are still either modeled from the bottom-up, by combining multiple more simple components, or by using overly abstract models such as ‘hysterons’, which require complex modeling to connect them to physical systems and moreover can lead to ill-defined systems [ 20 , 21 , 22 , 23 ] . Here, we introduce an easy-to-use framework that defines components at a level of abstraction that allows them to single-handedly and intrinsically capture highly nonlinear static mechanical responses that are traditionally achieved using multiple components. Our formulation is based on energy potentials tuned to be stationary on prescribed, arbitrarily complex, possibly multi-valued generalized force-displacement curves. We show that this energy-based formulation can generate a broad ecosystem of mechanical components, with a wide range of geometries and intrinsic complexities. We also show that the framework allows for a relatively straightforward approach to build aggregate models where the various interactions between simple and complex elements can be simulated and explored. We conclude this work by demonstrating that our framework allows to model, simplify, and simulate a wide variety of mechanical systems studied previously that are subject to, e.g., geometric nonlinearities, pre-stress, hysteresis, buckling, snapping, contact, cable-driven or pneumatic actuation. 2 Flexels Before introducing the full ecosystem, let us stress that structures composed of linear springs can exhibit nonlinear force-displacement relations resulting from geometric nonlinearities. A classic example is the Von-Mises truss, which, despite being composed of three linear springs, produces a non-monotonic (Fig. 1a) or even a multi-valued force-displacement curve (Fig. 1b), depending on the relative stiffness of the springs. The foundation of our approach is to represent such structures by single entities, which we call ‘flexels’. As shown in Fig. 1c,d, the intrinsic nonlinear behavior of a flexel can be tuned to capture, and be equivalent to, the geometric nonlinear behavior of compound structures, such as the Von-Mises trusses shown in Fig. 1a,b (Movie S1). More formally, a flexel is defined as a deformable element whose elastic energy directly depends on its geometric measure \alpha , a scalar quantity determined from the coordinates of the nodes composing the element, such as its length. The intrinsic nonlinear behavior of a flexel is defined by a generalized force-displacement curve, which relates the derivative of its elastic potential with respect to the geometric measure (that is, the generalized force f ) to the change in geometric measure (that is, the generalized displacement u=\Delta\alpha ). This relation encapsulates the nonlinear response and is used to construct an energy potential from which the ingredients needed for numerical simulations can be derived (SI section 1.1). Flexels can be assembled to investigate how interactions between

Read the complete text