Sliding Disassembly of van der Waals Heterostructures

Jordan Pack, Karl V. Falb, Sanat Ghosh, Xuehao Wu, Keng Tou Chu, Florie Mesple, Ellis Thompson, Zhuquan Zhang, Carolin Gold, Kenji Watanabe, Takashi Taniguchi, Dmitri N. Basov, A. N. Pasupathy, Matthew Yankowitz, Cory R. Dean, Aravind Devarakonda · 2025

Read Sliding Disassembly of van der Waals Heterostructures by Jordan Pack, Karl V. Falb, Sanat Ghosh, Xuehao Wu, Keng Tou Chu, Florie Mesple, Ellis Thompson, Zhuquan Zhang, Carolin Gold, Kenji Watanabe, Takashi Taniguchi, Dmitri N. Basov, A. N. Pasupathy, Matthew Yankowitz, Cory R. Dean, Aravind Devarakonda (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-19064.txt.

Introduction

Jordan Pack and fifteen co-authors show a new trick with layered stacks. The stacks join thin sheets of distinct materials. Such stacks drive much recent work on electrons. Their weak bonds allow very clean mixes. Normal film growth cannot match that.

The team uses shaped polymer stamps to slide the layers. Sliding can change what surrounds a graphene sheet. It can bare thin sheets for microscope study. It can also reset a stack after it was built. A finished stack thus stays open to change. Researchers can test more forms from the same pieces.

Catalog record

CREATORJordan Pack, Karl V. Falb, Sanat Ghosh, Xuehao Wu, Keng Tou Chu, Florie Mesple, Ellis Thompson, Zhuquan Zhang, Carolin Gold, Kenji Watanabe, Takashi Taniguchi, Dmitri N. Basov, A. N. Pasupathy, Matthew Yankowitz, Cory R. Dean, Aravind Devarakonda
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE41 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-19064

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Sliding Disassembly of van der Waals Heterostructures Jordan Pack, Karl V. Falb, Sanat Ghosh, Xuehao Wu, Keng Tou Chu, Florie Mesple, Ellis Thompson, Zhuquan Zhang, Carolin Gold, Kenji Watanabe, Takashi Taniguchi, Dmitri N. Basov, A. N. Pasupathy, Matthew Yankowitz, Cory R. Dean, Aravind Devarakonda Abstract \justify Many recent advances in our understanding of two-dimensional (2D) electron systems stem from van der Waals (vdW) heterostructures. The assembly process relies on the weak bonding across interfaces between layered vdW compounds, making it possible to construct exceptionally clean heterostructures from chemically and structurally distinct materials–a challenging task for traditional thin-film growth techniques. Here we demonstrate an additional, dynamic degree of freedom afforded by vdW interfaces, wherein we use microstructured polymer stamps to disassemble and reconfigure vdW heterostructures by sliding. We apply this technique to alter the dielectric environment of monolayer graphene, perform scanning tunneling microscopy on semiconducting and air-sensitive monolayers, and manipulate strain-sensitive moiré materials. Together these demonstrations suggest a new paradigm for assembling and dynamically modifying van der Waals heterostructures, with the potential to reveal new insights into 2D electron systems. Figure 1: Sliding disassembly of van der Waals heterostructures. (A) Schematic illustration of the sliding disassembly technique. First, a heterostructure is assembled using the conventional dry-assembly technique, followed by a short plasma treatment to clean the surface. To manipulate the layers, we use a PDMS stamp designed to limit the contact area to the target layer for sliding. By contacting the top layer with the sample and sliding laterally, for example, it can be removed from the heterostructure to reveal the layer underneath. (B) Optical image of an encapsulated monolayer graphene (mlg) before sliding the top hBN. (C) Optical image of the device in (B) after sliding the top BN to partially reveal the monolayer graphene. (D) AFM topograph of the exposed graphene edge (white box in (C) ), revealing a clean, flat monolayer graphene surface. Figure 2: Reconfigurable van der Waals heterostructures. (A) Schematic reconfiguration of a vdW heterostructure by replacing the top encapsulating material. (B) Optical images shown at multiple stages of the reconfiguration. After standard dry-transfer assembly, the top hBN is shifted to partially reveal the underlying monolayer graphene, then shifted back to cover it. Next the top hBN is completely removed, exfoliated 2 H -WSe 2 is placed over top, and then shifted to partially expose the graphene. (C) The spatial variation of the graphene 2D Raman peak \omega_{\mathrm{2D}} for each stage pictured in (B) . (D) Scatter plot of the graphene Raman G ( \omega_{\mathrm{G}} ) and 2D ( \omega_{\mathrm{2D}}) peaks of fully hBN-encapsulated graphene as assembled and after sliding manipulation, showing minimal variation. (E) Scatter plot of \omega_{\mathrm{G}} and \omega_{\mathrm{2D}} in the partially exposed stages, illustrating the systematic shift in \omega_{2D} due to differences in the dielectric environment surrounding the graphene sheet. (F) Median values of (left) \omega_{\mathrm{G}} and (right) \omega_{\mathrm{2D}} histograms, with one standard deviation error bars, as a function of the effective dielectric constant \kappa_{\mathrm{eff}} . Figure 3: Scanning tunneling microscopy of disassembled devices. (A) Schematic cartoon of the assembled monolayer H - \text{WSe}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} heterostructure with charge-transfer contacts, channel gate, and contact gate. The top hBN layer is etched into a removable region using an etch procedure designed to stop on the \alpha -RuCl 3 layer over the contacts. After etching, this region is slid to expose the device channel for (C) STM measurements. False color image of the device (B) before and (D) after the sliding release step. (E) Scanning atomic resolution topography of a gate-tuned region of the sample. (inset) Overlaid H - \text{WSe}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} crystal structure with tungsten (blue) and selenium (gray) atoms. (F) dI/dV spectroscopy of the sample showing a 2.11 \pm 0.08 eV band gap and Fermi level offset due to tip induced band bending. (inset) Two-terminal conductance of the sample as a function of contact gate measured at low temperature prior to removing the top hBN. (G) Schematic illustration of the sample consisting of a sacrificial top hBN, monolayer 1 T^{\prime} - \text{WTe}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} , bottom hBN, with a graphite contact and back gate. (H) False colored optical micrograph of the heterostructure as assembled. (I) Schematic of the final device heterostructure. (J) False color image of device after removing the top hBN layer inside a glovebox. (K) STM topograph of monolayer 1 T^{\prime} - \text{WTe}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} . (inset) Overlaid 1 T^{\prime} - \text{WTe}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} crystal structure with tungsten (blue) and tellurium (yellow) atoms. (L) dI/dV spectrum measured at two different values of V_{\mathrm{g}} averaged within V_{\mathrm{g}} = 0.04 V windows. (inset) dI/dV spectroscopy map versus V_{\mathrm{g}} . Figure 4: Sliding disassembly of moiré heterostructures. (A) Schematic illustration of twisted bilayer graphene (tBLG) aligned to hBN for STM characterization, with graphene-graphene twist angle \theta_{\mathrm{g-g}} and graphene-hBN twist angle \theta_{\mathrm{g-BN}} . In this device, exfoliated 2 H - \text{WSe}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} is used as the removable top layer. (B) STM topograph of the hBN-aligned twisted graphene device. The inset Fourier transform evidences two coexisting periodicities – one from the twisted graphene moiré and one from the graphene-hBN moiré. (C) Schematic of a twisted double bilayer graphene (tDBLG) sample measured with scanning near-field optical microscopy (SNOM). Two pulling steps are used – first to remove a topmost hBN layer to reveal a clean thin hBN surface, and a second to move the thin hBN partially to reveal the tDBLG. (D) Mid-infrared near-field phase image traversing the thin hBN edge showing domains of rhombohedral (dark) and Bernal (light) stacking orders. A dashed line indicates the edge of the thin hBN layer. The underlying domain structure evolves continuously across this boundary. (E) Schematic cartoon for the construction of a tBLG device by extracting a middle hBN spacer that initially separates the two graphene layers. (F) False-color AFM topography image of a tBLG prepared by technique. (G) Lateral force microscopy (LFM) image of the tBLG moiré formed by extracting the middle hBN of the device shown in (F) . (H) Fast Fourier transform of (G) . (I) Fourier filtered section of (G) (white dashed window) highlighting the moiré superlattice. Heterostructures fabricated from two-dimensional (2D) materials are rich and highly tunable platforms for studying novel electronic states. With strong in-plane bonding and weaker van der Waals (vdW) bonds oriented out-of-plane, 2D materials may be layered with little concern for interlayer chemistry and lattice registry. This makes it possible to interface materials with wide-ranging properties, free from the chemical considerations that constrain conventional heterostructure synthesis Geim and Grigorieva 2013 . The unique, additional degrees of freedom afforded by vdW interfaces are exemplified by moiré patterning, where lattice mismatch and rotational faults at 2D interfaces can be exploited to engineer band structures supporting new correlated and topological ground states Balents et al. 2020 ; Kennes et al. 2021 . Experimental progress with vdW heterostructures has stemmed from continued advances in assembly methods. For example, mechanical transfer, in which exfoliated layers are physically laminated together, has enabled the fabrication of increasingly complex geometries with pristine 2D interfaces Dean et al. 2010 ; Wang et al. 2013 ; Kim et al. 2016 ; Saito et al. 2020 ; Liu et al. 2020 ; Mannix et al. 2022 ; Wang et al. 2023 . In tandem with heterostructure construction, various electrical contact methods have been

Read the complete text