Formation characteristics of Taylor bubbles in power-law liquids flowing through a microfluidic co-flow device Journal: Journal of Industrial and Engineering Chemistry
Somasekhara Goud Sontti, Arnab Atta · 2025
Read Formation characteristics of Taylor bubbles in power-law liquids flowing through a microfluidic co-flow device Journal: Journal of Industrial and Engineering Chemistry by Somasekhara Goud Sontti, Arnab Atta (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-18930.txt.
Introduction
Somasekhara Goud Sontti and Arnab Atta model how Taylor bubbles form in power-law liquids inside a small co-flow device. Taylor bubbles are long gas bubbles that move through liquid in a narrow channel, and their size and shape affect how microfluidic systems mix and transport fluids.
Using computer simulation, the authors vary the strength of a polyacrylamide solution, gas and liquid speeds, and surface tension. They observe different breakup routes, sort the flows into two regimes by bubble length, build flow pattern maps, and propose scaling laws that estimate bubble length from the operating conditions.
Catalog record
| CREATOR | Somasekhara Goud Sontti, Arnab Atta |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-18930
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Formation characteristics of Taylor bubbles in power-law liquids flowing through a microfluidic co-flow device Journal: Journal of Industrial and Engineering Chemistry Somasekhara Goud Sontti, Arnab Atta Abstract Formation and dynamics of Taylor bubble in power-law liquids flowing through a circular co-flow microchannel are numerically investigated using coupled level set and volume-of-fluid method. Aqueous solutions of polyacrylamide (PAAm) are used as power-law liquids. Influences of PAAm concentration, gas-liquid velocities, and surface tension on bubble characteristics are explored. Various mechanism of bubble breakup are observed in different concentration of PAAm. Based on the bubble length with respect to the channel diameter, two different flow regimes are identified. Flow pattern maps are constructed based on inlet velocities, and scaling laws are proposed to estimate the bubble length. 1 Introduction Taylor flow in microfluidics is categorized as one of the critical two-phase flow patterns, where capsular bubbles, mostly termed as Taylor bubbles, are formed in a continuous stream of liquid. The equivalent diameter of such a bubble is typically larger than the same of the associated microchannel. There exists a thin layer of liquid near the channel wall, which surrounds the Taylor bubble, and two consecutive bubbles are separated by a liquid slug [ 1 ] . Due to reduced axial, and enhanced radial mixing [ 2 , 3 ] , analysis of Taylor flow is of paramount importance in the context of multiphase reactions [ 4 , 5 ] and micromixing [ 6 , 7 ] . Moreover, in several applications, the Taylor bubble size and flow behavior need to be controlled and precisely manipulated. Numerous studies have delineated various flow regimes [ 8 , 9 , 10 , 11 ] , and have proposed flow maps for wide-ranging microchannel configuration with gas–liquid systems. Although, these attempts had limited applicability, but it is corroborated that Taylor flow regime occupies a significant part of any flow map. Over the years, considerable attention has been devoted to understand the bubble formation mechanism in various microchannel designs e.g., co–flow [ 12 , 13 ] , T–junction [ 14 , 15 , 16 ] , and flow–focusing [ 17 , 18 ] devices. Goel and Buwa 2008 , and Shao et al. 2008 numerically studied bubble formation in circular capillaries using volume–of–fluid (VOF) technique and investigated various influencing parameters, such as inlet conditions, superficial velocities, capillary diameter, and wall contact angle. Chen et al. 2009 employed level set (LS) method to study the Taylor bubble formation in a co–flow configuration. Fu and Ma 2015 reviewed numerous experimental and numerical studies on bubble formation, and breakup dynamics in microfluidic devices. Recently, Fletcher and Haynes 2017 proved conflicting results on liquid film thickness around a Taylor bubble, and provided several guidelines for reporting two–phase flow systems in microchannels. Few researchers successfully captured the thin liquid film thickness in their numerical studies through near wall mesh refinement [ 24 , 25 , 26 ] . There is considerable amount of literature on Taylor bubble formation in Newtonian liquids. Interestingly, several fluids that are frequently encountered in industry and daily life including blood, protein, crude oil, polymer solution, etc. are likely to exhibit non-Newtonian behavior [ 27 ] . Moreover, in a two–phase flow system, liquid properties play critical roles in heat and mass transfer studies [ 28 , 25 ] . Consequently, the bubble formation and breakup mechanism are complicated due to distinctive characteristics of non–Newtonian fluids. Few experimental studies have depicted the effect of rheological properties on Taylor bubble formation in various microchannel configurations [ 29 , 30 , 31 ] . Li et al. 2002 developed a theoretical model to understand the bubble formation in non–Newtonian liquids (carboxymethylcellulose (CMC) and polyacrylamide (PAAm) solutions) by revising the model used for a Newtonian system. Predicted bubble volume and formation frequency were in reasonable agreement with the experiments. Tang et al. 2012 studied flow characteristics of water and PAAm in untreated and hydrophobic microchannels. Their results showed that friction factors of PAAm solution were higher than theoretical values, and the hydrophobic microchannel was capable of reducing flow resistance as compared to untreated microchannels. Using a T–junction microchannel, Fu et al. 2011 experimentally investigated bubble formation mechanism in non–Newtonian liquids, and observed various flow patterns by adjusting the gas and liquid flow rates. Their results revealed that rheological parameters of non–Newtonian fluid significantly influence bubble size, shape of the gaseous thread, and formation mechanism. Wang et al. 2011 also demonstrated different flow patterns such as slug flow, slug–annular flow, and annular flow in a T–junction microchannel using a gas–CMC system. With the help of micro-particle image velocimetry ( \mu PIV), Fu et al. 2012 analyzed the breakup of slender bubbles in non-Newtonian liquids flowing through a flow-focusing microchannel. Velocity and viscosity distributions around the gaseous thread were analyzed to understand the bubble breakup mechanism, and a scaling law was proposed to estimate the bubble size. Mansour et al. 2015 studied two–phase flow in a rectangular T-junction microchannel with different mass concentration of PAAm aqueous solutions. Their analysis also suggested significant effects of rheological properties on the flow pattern, bubble length, liquid slug length, bubble velocity, and frictional pressure drop. Picchi et al. 2015 studied the characteristics of air-CMC system in horizontal and inclined smooth pipes. The effect of pipe inclination and rheology of CMC were reported in terms of flow pattern maps obtained by visual observation. For various operating conditions, slug length, velocity, and frequency were also described. Laborie et al. 2016 illustrated the effect of yield stress fluids on bubble formation in T–junction, and flow–focusing microchannels. They also provided a phase diagram for transient operation of bubble production in yield stress fluids. Chen et al. 2013 developed a three-dimensional numerical model for bubble formation in a T–junction microchannel containing Newtonian and non–Newtonian liquids using VOF method. Initially, their numerical model was verified for Newtonian liquids with in-house experimental visualization, and thereafter the model was extended for the power-law and Bingham fluids. However, there are limitations of the VOF method regarding surface tension force modeling, which limit its applicability in estimating smoothed physical properties across the interface. Improper formulation of balance between surface tension induced capillary force and pressure jump across the interface leads to the development of unphysical velocity near the interface, which is typically referred to as spurious currents [ 39 , 40 ] . Several researchers have attempted to reduce spurious currents with different approaches [ 41 , 42 , 43 , 44 ] . Sussman and Puckett 2000 developed a coupled LS and VOF (CLSVOF) technique by combining the advantages of both the methods. This strategy helps to utilize the advection of the VOF function for conserving the mass, and to smoothly capture the interface by calculating the radius of curvature from the LS function, simultaneously. Numerous studies have been reported using CLSVOF method in different applications, e.g. bubble rise in viscous liquids [ 46 ] , bubble formation on submerged orifices [ 47 ] , droplet impact on a liquid pool [ 48 ] , influence of the fluid properties on Taylor bubble formation [ 49 ] , axisymmetric droplet formation [ 50 ] , droplet coalescence [ 51 ] , and demulsification [ 52 ] .