CFD study on Taylor bubble characteristics in Carreau–Yasuda shear thinning liquids Journal: The CJCE Special Issue on CFD Symposium at WCCE-10
Somasekhara Goud Sontti, Arnab Atta · 2025
Read CFD study on Taylor bubble characteristics in Carreau–Yasuda shear thinning liquids Journal: The CJCE Special Issue on CFD Symposium at WCCE-10 by Somasekhara Goud Sontti, Arnab Atta (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-18928.txt.
Introduction
Somasekhara Goud Sontti and Arnab Atta run a computational fluid study of Taylor bubbles in Carreau-Yasuda shear-thinning liquids. In such liquids, thickness drops as flow speeds up, and that change can alter bubble length, shape, speed, and the thin liquid film around each bubble in a narrow channel.
Solutions of carboxymethyl cellulose at several strengths serve as the test liquids. As viscosity and liquid inlet speed rose, bubbles formed more often and moved faster, but grew shorter. The authors also chart velocity inside bubbles and liquid slugs, and build flow maps from the inlet conditions.
Catalog record
| CREATOR | Somasekhara Goud Sontti, Arnab Atta |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 30 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-18928
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
CFD study on Taylor bubble characteristics in Carreau–Yasuda shear thinning liquids Journal: The CJCE Special Issue on CFD Symposium at WCCE-10 Somasekhara Goud Sontti, Arnab Atta Abstract In the present study, Taylor bubble formation in two–phase gas–non-Newtonian Carreau liquid flowing through a confined co–flow microchannel is investigated. Systematic analysis are carried out to explore the influences of rheological properties, inlet velocities, and surface tension on Taylor bubble length, shape, velocity and liquid film thickness. Aqueous solutions of carboxymethyl cellulose (CMC) with different mass concentrations are considered as the non–Newtonian liquids to understand the fundamentals of flow behaviour. With increasing solution viscosity and liquid phase inlet velocity, Taylor bubble formation frequency and velocity increased, however, the bubble length was found to decrease. Velocity profiles inside the Taylor bubble and liquid slug were analyzed, and distinct velocity distributions were found for different CMC concentrations. Flow pattern maps are constructed based on inlet velocities for Carreau liquids in co–flow microchannel. This study essentially provides useful guidelines in designing non-Newtonian microfluidic system for precise control and manipulation of Taylor bubbles. Introduction In recent years, studies on two–phase flow in microchannels have attracted vast interest due to its wide range of applications in microfluidics, lab-on-a-chip devices, and microreactors. 1 , 2 Two–phase flow patterns are generally classified as bubbly, Taylor, churn, annular, and stratified flow. Taylor bubble flow is one of the critical two–phase flow patterns, where elongated bubbles are separated by liquid slug, and is characterized by a length larger than the equivalent diameter of the channel. Significant advantages of the Taylor bubble flow are its superior heat and mass transfer performance, which are distinguished by interfacial area and internal circulation. 3 , 4 , 5 , 6 These parameters are determined by the bubble length, near-wall liquid film thickness, and velocity field inside the Taylor bubble, as well as in liquid slug. Internal circulatory flow patterns enhance convective mass transport, and reduce axial dispersion. 7 Co–flow configuration is one of the simplest microfluidic geometries that is typically utilized for Taylor bubble formation, where the dispersed and continuous phases flow in parallel to one another. To obtain the desired segmented flows, specific ranges of flow rates for both phases need to be controlled. Numerous studies have proposed various flow regimes for different flow condition in microchannels. 8 , 9 , 10 Salman et al. 11 studied Taylor bubble formation in capillary tubes using co–flow microchannel, and observed different mechanism of bubble formation and coalescence for low liquid flow rates. To identify the interface between two phases, different numerical methods are typically available namely, Front-Tracking (FT) 12 , Volume of Fluid (VOF) 13 , 14 , Level Set (LS) 15 , Phase Field 16 and Lattice Boltzmann method (LBM) 17 , 18 . Yu et al. 19 carried out experiments and LBM simulations of air–oil two-phase flow in cross and converging shaped microchannels to understand the bubble shape, size, and formation mechanism under different flow rates and mixer geometries. They identified bubbly and slug flow regimes depending on the Capillary number (Ca). Chen et al. 20 investigated Taylor bubble formation in a nozzle–tube co–flow configuration using LS method, and predicted liquid film thickness around the bubble, which was in fair agreement with the experimental observation by Bretherton 21 . Goel and Buwa 22 analyzed bubble formation in circular capillaries using VOF method, and described the effect of various parameters, such as superficial velocities, capillary diameter, and wall contact angle. With the help of a VOF model, Gupta et al. 23 critically analysed Taylor bubble flow in a circular microchannel, and provided guidelines to capture liquid film thickness around the Taylor bubble by imposing refined mesh in the vicinity of wall. Wang 24 also applied VOF method to understand Taylor bubble flow for air–water system in a tapered co–flow geometry, where the effects of flow rates and nozzle injection length on bubble sizes and bubbling frequencies were explored. From the literature, it is apparent that most of the efforts are devoted in understanding and modelling of the Taylor flow hydrodynamics and its characteristics associated with Newtonian liquids at the microscale. However, the fluid behaviour of non–Newtonian fluids are known to be different from that of Newtonian fluid, as the viscosity depends on the shear rate. 25 , 26 In reality, many commercial chemicals (e.g., colloidal suspensions and polymer solutions) and bio–logical samples (e.g., blood and DNA solutions) exhibit non–Newtonian shear thinning and viscoelastic characteristics. 27 Bubble formation and breakup mechanism in such liquids are complex due to distinctive attributes of non–Newtonian liquids. 28 Consequently, the fundamental studies of two–phase flow involving non–Newtonian fluids are of paramount interest, and considerable attention have been devoted to gain insights into the effect of rheological properties on Taylor bubble formation in different microchannel configurations. 29 , 30 , 31 , 32 Fu et al. 30 experimentally studied bubble formation in T–junction microchannels using different concentrations of polyacrylamide (PAAm) solutions, and observed various flow patterns by varying gas and liquid flow rates. It is evident from their results that the bubble size increases non–linearly with the gas-liquid flow rate ratios, and decreases with the concentration of PAAm solutions. Chen et al. 31 developed a three–dimensional numerical model to understand bubble formation in a T–junction microchannel for Newtonian and non–Newtonian liquids using VOF method. Initially, their numerical model was verified for Newtonian liquids with in–house experimental visualization, and then the model was extended for power–law and Bingham liquids. Laborie et al. 32 illustrated the effect of yield stress fluids on bubble formation in T–junction, and flow–focusing microchannels. They also provided a phase diagram for transient operation of bubble production in yield stress fluids. Wang et al. 33 also studied different flow patterns such as slug, slug–annular, and annular flow in a T–junction microchannel using a gas–carboxymethyl cellulose (CMC) system. We have recently reported Taylor bubble formation in a co–flow microchannel with Newtonian and power–law liquids using VOF method. 34 Different mass concentrations of CMC were considered as the non–Newtonian liquid phase, and the results showed that in the presence of CMC, bubble length decreased, but formation frequency increased due to enhanced effective viscosity of the liquid phase. We also reported flow pattern maps in co–flow microchannel based on gas and liquid phase inlet velocities for power–law liquids. 35 This work aims to investigate the characteristics of Taylor bubble flow in high viscous liquids. Taylor bubble formation in non–Newtonian CMC solutions is studied using finite volume method. To understand the underlying physics of Taylor bubble formation in shear thinning liquids, a Carreau–Yasuda viscosity model is considered, which has not been addressed earlier in literature. For a better understanding of the non–Newtonian flow field associated with Taylor bubbles, the effects of rheological properties, liquid inlet velocity, and surface tension are studied by analyzing the bubble length, velocity, shape, surrounding liquid film thickness, and velocity field distribution inside the Taylor bubble. Numerical model In general, the physical process of multiphase flow is described by a set of conservation equations like mass, momentum, and a marker function to identify the fluid-fluid interface. As discussed in the previous section, there are several interface capturing methods available with its own advantages and disadvantages. VOF model is relatively simple