Hydrogen redistribution in Zr-base cladding under gradients in temperature and stress Presented in SMiRT-28, August 10-15, 2025, Toronto, Canada .
L. O. Jernkvist & A. R. Massih · 2025
Read Hydrogen redistribution in Zr-base cladding under gradients in temperature and stress Presented in SMiRT-28, August 10-15, 2025, Toronto, Canada . by L. O. Jernkvist & A. R. Massih (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-18685.txt.
Introduction
Lars Jernkvist and Ali Massih simulate how hydrogen moves inside the zirconium cladding that wraps nuclear fuel. During reactor operation the cladding picks up hydrogen, and where that hydrogen gathers, brittle hydride compounds can form and weaken the tube. Two patterns matter most: hydrogen collecting along the tube near the cooler gaps between fuel pellets, and hydrogen forming a dense rim just under the outer oxide layer.
A purpose-built model handles the first pattern, while a more general model handles the inward radial drift behind the rim. The authors compare their calculated results with experimental observations and with similar published studies. Their conclusion underlines that hydrogen redistribution, driven by gradients in temperature and stress, is central to the local embrittlement that can limit cladding life.
Catalog record
| CREATOR | L. O. Jernkvist & A. R. Massih |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-18685
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Hydrogen redistribution in Zr-base cladding under gradients in temperature and stress Presented in SMiRT-28, August 10-15, 2025, Toronto, Canada . L. O. Jernkvist & A. R. Massih Abstract Computational models are used here for simulating diffusion-controlled redistribution of hydrogen that is picked up by zirconium-base nuclear fuel cladding during light water reactor operation. Axial localization of hydrogen, leading to localized precipitation of zirconium hydrides at lower-temperature regions near interpellet gaps, is studied with a bespoke model, while radial diffusion, leading to formation of a densely hydrided rim subjacent to the waterside oxide layer, is studied with a more general model. The calculated results are compared with experimental observations and similar computational studies reported in the literature. The results underline the importance of hydrogen redistribution with regard to local embrittlement of the cladding tubes. 1 Introduction Zirconium base alloys utilized for fuel cladding in water-cooled nuclear reactors pick up hydrogen as a consequence of oxidation and irradiation during reactor service. When the hydrogen reaches its solid solubility concentration in the metal ( \alpha -phase), precipitates of zirconium hydride ( \delta -phase) nucleate and grow. The uptake of hydrogen and its precipitation to hydride may potentially embrittle the cladding. The embrittlement is generally localized to regions with low temperature and/or high tensile stress, since hydrogen in solid solution redistributes to these regions by migration along gradients in temperature and stress. Light water reactor (LWR) fuel cladding inevitably operates with radial, axial and circumferential temperature gradients, which may be locally augmented by geometric irregularities, e.g. interpellet gaps and spalled oxide layers. To understand the localized embrittlement, modelling hydrogen redistribution in Zr-alloys under temperature gradients has been an enduring effort over the years. Early works include [ Mar58 ] , [ SV61 ] , [ AT70 ] and [ Mar72 ] . Many of these early models were not suitable for treating conditions that prevail in LWRs, where the cladding operate with temperature gradients while continuously picking up hydrogen that precipitates into hydride phase. A model for hydrogen redistribution in the presence of radial and axial temperature gradients in boiling water reactor (BWR) fuel cladding, suitable for describing how hydrogen would localize in the interpellet region of the cladding, was offered in [ FM90 ] . It used a single-phase description of hydride precipitation. In the first part of our paper, we use an extended version of the [ FM90 ] method to compute the time evolution of axial hydrogen redistribution both in \alpha -phase and \delta -phase in a BWR Zircaloy-2 cladding close to an interpellet gap. In the second part of the paper, we study the formation of a densely hydrided rim, subjacent to the waterside oxide layer of severely corroded pressurized water reactor (PWR) fuel cladding. Calculations are done with a general model [ JM14 ] that treats temperature- and stress-induced hydrogen diffusion in both phases ( \alpha+\delta ), in order to elucidate the effects of -hydride precipitates on hydrogen transport. 2 Single-phase thermal model The model used in the first part of our computations has been presented previously [ FM90 ] and in more detail in [ FM25 ] with some modifications. Here, we shall be brief. 2.1 Governing equations Hydrogen absorbed at the waterside surface of the zirconium alloy cladding tube diffuses into the material under temperature gradients with a flux \mathbf{j} . The basic equations describing the processes are \displaystyle\frac{\partial N}{\partial t}=-\nabla\cdot\mathbf{j} (1) \displaystyle\mathbf{j}=-D_{\alpha}\big(\nabla-Q^{\ast}_{\alpha}\nabla\beta\big)N_{s\alpha}, (2) where \nabla is the gradient operator, N is the total concentration of hydrogen, N_{s\alpha} is the concentration of hydrogen in solid solution within the \alpha -phase metal, D_{\alpha} and Q^{\ast}_{\alpha} are the hydrogen diffusion coefficient and the heat of transport, respectively, in \alpha -phase, and \beta=(RT)^{-1} is the inverse of temperature with R being the molar gas constant. For D_{\alpha} and Q^{\ast}_{\alpha} , we use the correlations presented in [ JM14 ] . Equation ( 2 ) models the Soret effect [ DGM13 ] , which causes migration of solute particles, here hydrogen atoms, from the hotter to colder region of the solid under a temperature gradient. The above equations are solved with a quasi steady-state approximation: We know from the theory of diffusion that the mean distance travelled by the particle in a specimen during any time, t_{0} , is proportional to the square root of time, namely \langle r^{2}\rangle=4Dt_{0} in two dimensions, see e.g. [ LL59 ] . Using D_{\alpha} for a typical cladding operating temperature of 583 K and a mean distance of 2 mm, t_{0}\approx 4 hours. Since this time is short in comparison with the hydrogen uptake rate during reactor operation, the solution to eqs. ( 1 )-( 2 ) is approximately a sequence of equilibrium solutions. Hence, eq. ( 1 ) in the model is replaced with a relation for the hydrogen uptake rate that defines the evolution of average hydrogen concentration in the material, while a sequence of solutions to \mathbf{j}=0 provides the hydrogen distribution at any time. As in [ FM90 ] , in our calculations, we use a constant hydrogen uptake rate at the cladding outer surface, viz. \frac{dN_{g}}{dt}=c_{1},\quad\quad\Longrightarrow\quad\quad N_{g}=c_{0}+c_{1}t, (3) where c_{0} is the initial or residual hydrogen impurity concentration in the as-fabricated material, which is here set to c_{0}=0 , and c_{1} is a constant that corresponds to a hydrogen uptake rate of 1062 \mu g(m 2 day) -1 . This rate of hydrogen uptake may be considered as fairly high for Zr base cladding in LWR conditions. As noted in the introduction, when hydrogen in zirconium alloys reaches a certain level of concentration at a given temperature, it precipitates into zirconium hydride (e.g. ZrH 1.6 ), referred to as the \delta -phase as distinguished from the \alpha -phase in which hydrogen resides in solid solution. The genre of this phase transformation is nucleation with subsequent growth of nuclei to zirconium hydride platelets. The boundary of this phase transformation, i.e., temperature vs. concentration is expressed by N_{p\alpha}=N_{c}\exp(-\beta H), (4) where N_{p\alpha} is referred to as the terminal solid solubility for hydride precipitation, or TSSP, N_{c} is a constant and H is the heat of mixing or the enthalpy of the \delta -phase formation. These quantities are determined by measurements which are affected by irradiation; see e.g. [ UIE+09 ] . Numerical values for these parameters, which we have used in our calculations, are listed in Table 1 . Table 1: Constant model parameters used in calculations. Symbol [unit]: Value Definition N_{c} [wppm] 32700 Constant in eq. ( 4 ) for TSSP \overline{H} [kJmol -1 ] 25.04 Mean value of \delta -phase formation enthalpy \widetilde{\upsigma}_{\mathrm{H}} [kJmol -1 ] 0.416 Standard deviation for \delta -phase formation enthalpy N_{\delta} [wppm] 16500 Hydrogen concentration in \delta -phase at \delta/(\alpha+\delta) phase boundary 2.2 Methods of solution As discussed above, hydrogen uptake in Zr-base cladding under LWR conditions is much slower than hydrogen diffusion. This allows hydrogen to reach a state of equilibrium expediently with \mathbf{j}=0 . So, in thermal equilibrium, eq. ( 2 ) can be integrated to give N_{s\alpha}=C\exp(\beta Q^{\ast}_{\alpha}), (5) where C is an integration constant to be determined by the boundary condition. If the outer surface temperature of the cladding is considered to be constant, i.e. T=T_{o} or \beta=\beta_{o} , corresponding to a concentration