Modeling Polaron Excitations and Stabilization Mechanisms in Conjugated Polymers

Vishal Jindal, Scott T. Milner ∗ · 2025

Read Modeling Polaron Excitations and Stabilization Mechanisms in Conjugated Polymers by Vishal Jindal, Scott T. Milner ∗ (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-18677.txt.

Introduction

Vishal Jindal and Scott Milner investigate polarons in a plastic semiconductor. A polaron forms in a clear way. A charge carrier pulls its surroundings out of shape. It then becomes trapped by that distortion. Their model describes the polymer P3HT with tight-binding math. Stabilization comes from the surrounding dielectric. The model settings come from first-principles calculations.

Computed polaron states matched key infrared features. One match was a shift in an intrachain peak. The shift depends on chain length. Orderly and disorderly polymer forms also differed as in the data. A rival account blamed local ring distortions. That account gave binding that was too weak. Its excitation energies clashed with experiment too. The authors say dielectric polarization forms these polarons. Their framework links polaron energy to spectra that labs can measure.

Catalog record

CREATORVishal Jindal, Scott T. Milner ∗
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2510-18677

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Modeling Polaron Excitations and Stabilization Mechanisms in Conjugated Polymers Vishal Jindal, Scott T. Milner ∗ Abstract Charge carriers in organic semiconductors form polarons, which are self-localized states stabilized by interactions with their environment. Using a dielectric-stabilized tight-binding model parameterized from first-principles calculations, we compute ground and excited polaron states in poly(3-hexylthiophene) (P3HT). Our results quantitatively reproduce key mid-infrared absorption features, notably the chain-length-dependent shift of the intrachain polaron excitation peak (peak B) and its variation between regioregular and regiorandom P3HT. Comparison to an alternative stabilization mechanism based on local ring distortions reveals that dielectric polarization dominates polaron formation, as ring distortions yield insufficient binding and excitation energies inconsistent with experiments. These findings clarify the microscopic origin of polarons in conjugated polymers and provide a predictive framework linking polaron energetics to spectroscopic observables, advancing the understanding of charge transport in organic semiconductors. 1 Introduction In organic semiconductors, a charge carrier (electron or hole) tends to form a polaron. A polaron results when a charge carrier interacts with its environment to produce a self-bound state in which the carrier is stabilized by the deformation of the surrounding medium. [ 1 ] The two basic mechanisms are moving partial charges and deforming of electron clouds. The former involves moving the positions of atoms on which partial charges resides, and the latter involves distorting the electron clouds that form chemical bonds. Together, these local and electronic distortions create a self-consistent potential well that localizes the carrier and defines the polaron state. Polarons are important in organic semiconductors because hopping is only strong in one dimension and the disorder messes up delocalization. Unlike organic crystals with three dimensional intermolecular coupling, the conductivity in semiconducting polymers is only one-dimension with weak connections across chains which led to charges being localized into one-dimensional polarons. Polaron hopping mechanisms have been used to model charge transport in disordered organic polymers such as amorphous poly(3-hexyl)thiophene (P3HT). While the direct experimental access to polaron size, shape, or mobility remain challenging, mid-infrared absorption spectroscopy provides a window into the energy landscape of polaronic states. Specifically, it probes optical transitions between ground and excited polaron configurations. [ 2 , 3 , 4 ] In poly(3-hexylthiophene) (P3HT), the mid-infrared absorption spectrum (see Fig. 1) reveal two prominent features: a narrow, low-energy peak (labeled as peak A) and a broader, higher-energy peak (peak B). Peak A appears relatively insensitive to chain morphology, while peak B shifts significantly between regioregular (RR) and regiorandom (RRa) P3HT, suggesting a dependence on the underlying polymer structure. Figure 1 : Experimental mid-infrared absorption spectra of regioregular (RR) and regiorandom (RRa) poly(3-hexylthiophene) (P3HT). Two distinct absorption features are observed: Peak A, a narrow low-energy band that appears in both RR and RRa P3HT, and Peak B, a broader high-energy band whose position and intensity vary significantly between RR and RRa-P3HT. These spectral features reflect optical transitions between polaronic states, but they do not directly measure the spatial extent or mobility of the polaron. Interpreting these transitions requires a theoretical framework that connects the observed energies to specific electronic configurations. In this work, we treat the polaron as a bound state whose ground and excited wavefunctions can be computed using a tight-binding model incorporating dielectric stabilization. Within this model, the energy difference between ground and excited states corresponds to the observed absorption peaks, and the spatial profile of the wavefunction, which we refer to as delocalization, affects the transition energy. Previous models of polaron absorption spectra in conjugated polymers have often relied on phenomenological assumptions, introducing adjustable parameters to fit experimental spectra without microscopic justification. Many models described polaron absorption by introducing localized in-gap states stabilized by lattice distortions, with their energies and spatial extent tuned empirically to reproduce the observed two-peak mid-infrared structure. [ 5 , 6 ] To account for variations between ordered and disordered films, these models invoked empirical distributions of conjugation lengths or energetic disorders [ 7 ] , or treated the absorption features as collective plasmonic modes with parameters adjusted to match mobility values. [ 8 , 9 ] While such approaches captured broad spectral features, they lacked predictive power and did not clarify the microscopic origin of polaron stabilization or excitation energetics. Here, we apply a previously established tight-binding model incorporating dielectric stabilization to investigate polaron excitations in conjugated polymers. [ 10 ] The model accounts for both kinetic delocalization along the conjugated backbone and electrostatic stabilization from induced polarization in the surrounding dielectric medium. All model parameters including onsite energies, hopping matrix elements, and dielectric polarization energies are either extracted or calculated from first-principles electronic structure calculations using density functional theory (DFT). We use this framework to interpret the shift in peak B as a consequence of changes in intrachain polaron structure. Regioregular P3HT, with its planar backbone and extended conjugation, supports broader polaron wavefunctions and lower excitation energies. In contrast, regiorandom P3HT introduces torsional disorder that restricts conjugation length, leading to more localized polarons and higher excitation energies. By comparing model predictions to experimental spectra, we aim to evaluate whether dielectric stabilization alone can account for these trends, or whether local vibrational modes such as local ring distortions must be considered. This paper is structured as follows. First, we present the dielectric-stabilized tight-binding model and its parameterization scheme using DFT. Next, we compute polaron ground and excited states across varying chain lengths, and compare the predicted excitation energies with polaron absorption spectrum peak B. To assess the possible role of local geometric distortions, we formulate a model of ring-coupled polarons based on quantum chemical calculations. Finally, we analyze and contrast the contributions of both stabilization mechanisms, providing a quantitative framework for understanding polaron formation in conjugated polymers. 2 Tight-binding polaron model A charge carrier on a conjugated polymer chain induces dipoles in the surrounding polarizable medium. The attractive interaction between the charge and its induced polarization lowers the system’s total energy, leading to a stabilized, self-localized polaron state. This stabilization arises from electronic polarization of nearby molecules and the polymer environment, distinct from local geometric distortions of the polymer backbone. The total polaron energy E_{\mathrm{Pol}} is expressed as the sum of two terms: E_{\mathrm{Pol}}=E_{K}+E_{P}, (1) where E_{K} is the electronic kinetic energy of the delocalized carrier along the chain, and E_{P} is the polarization energy arising from dielectric stabilization. The kinetic energy is described using a one-dimensional tight-binding Hamiltonian: H_{\mathrm{TB}}=-t\sum_{k=1}^{n-1}\left(c_{k}^{\dagger}c_{k+1}+c_{k+1}^{\dagger}c_{k}\right). (2) where c_{k}^{\dagger} and c_{k} are creation and annihilation operators on site k , and t is the nearest-neighbor hopping matrix element, extracted from DFT calculations on thiophene monomer and dimer. For a planar P3HT chain, we obtain t=1.23 eV for hole polarons. [ 11 ] The tight-binding wavefunction is written as \psi_{a}=\sum_{i}a_{i}|i\rangle , where |a_{i}|^{2} is the probability of finding the charge on site i . The kinetic energy is then: E_{K}=-t\sum_{i}\left(a_{i}^{*}a_{i+1}+a_{i+1}^{*}a_{i}\right) (3) To compute the polarization energy, we treat the surrounding environment as a linear dielectric continuum with relative permittivity \epsilon_{r} . The charge density on each site is approximated as a three-dimensional Gaussian distribution with width \sigma_{i} . This smeared-charge representation avoids the divergence of the Coulomb self-interaction for point charges. The Gaussian width is extracted from DFT calculations of the charge distribution on monomer units, yielding \sigma_{i}=2\rm\AA for thiophene monomers.

Read the complete text