Impact of Jet Density on Intracluster Medium Heating in Self-Regulated AGN Feedback Simulations 2026 Impact of Jet Density on Intracluster Medium Heating in Self-Regulated AGN Feedback Simulations – References
Tzu-Wei Tsai, Hsiang-Yi Karen Yang · 2025
Read Impact of Jet Density on Intracluster Medium Heating in Self-Regulated AGN Feedback Simulations 2026 Impact of Jet Density on Intracluster Medium Heating in Self-Regulated AGN Feedback Simulations – References by Tzu-Wei Tsai, Hsiang-Yi Karen Yang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-17518.txt.
Introduction
Tzu-Wei Tsai and Hsiang-Yi Karen Yang simulate black hole jets heating galaxy clusters in a 2025 arXiv paper. Huge clusters of galaxies hold hot gas that should cool and flow inward over time. Jets from a central black hole can reheat that gas and slow the cooling. How jet density changes this heating was not well understood.
The pair ran 3D fluid simulations of a cluster much like Perseus. Light jets blew rounder bubbles and bent more easily in cold gas, spreading energy widely. Yet light jets heated less well overall and needed more power to stay balanced. Heavy jets heated more with less power. Cold gas amount and placement also shaped how well heating worked.
Catalog record
| CREATOR | Tzu-Wei Tsai, Hsiang-Yi Karen Yang |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 29 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-17518
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Impact of Jet Density on Intracluster Medium Heating in Self-Regulated AGN Feedback Simulations 2026 Impact of Jet Density on Intracluster Medium Heating in Self-Regulated AGN Feedback Simulations – References Tzu-Wei Tsai, Hsiang-Yi Karen Yang Abstract Active galactic nucleus (AGNs) feedback is widely accepted as the key mechanism to suppress cooling flows in galaxy clusters. However, the dependence of heating efficiency on jet properties is not fully understood. In this work, we present three-dimensional hydrodynamic simulations of a Perseus-like cluster, including both single-jet and self-regulated models, to investigate how jet density affects bubble evolution and the thermal balance of the intracluster medium. Our results confirm previous findings that lighter jets inflate more spherical bubbles and are more easily deflected by cold gas, enabling isotropic energy deposition throughout the cluster core. However, despite their broader spatial impact, lighter jets display lower overall heating efficiency, requiring higher average jet power to maintain self-regulation compared to heavier jets. We also find that the distribution and amount of cold gas significantly influence the effectiveness of jet heating. These results highlight jet density as a critical parameter in AGN feedback and emphasize the need to incorporate additional physical processes such as magnetic fields, viscosity, and cosmic rays in future studies for realistic comparisons with observations. 1 Introduction A galaxy cluster with a short central cooling time is known as a cool-core (CC) cluster. These clusters exhibit high central gas density ( \gtrsim 10^{-2}\text{ cm}^{-3} ) and low central entropy ( \lesssim 50\text{ keV cm}^{2} ), conditions that are expected to lead to significant gas inflows. This flow is predicted by the "cooling-flow" model ( Fabian 1994 ) and could induce the intensive star formation in the central brightest cluster galaxy. However, such inflows and the predicted high star formation rates (SFRs) have not been observed ( Peterson & Fabian 2006 ) . This is the "cooling-flow problem". Active galactic nucleus (AGN) feedback at the cluster center is now widely accepted as a key solution to the cooling flow problem (see reviews by McNamara & Nulsen 2012 ; Bourne & Yang 2023 ). In simulations, insufficient AGN feedback can result in unrealistically high SFRs compared to observational data ( Li et al. 2015 ) . Meanwhile, X-ray observations have provided compelling evidence for AGN feedback and its associated heating effects in galaxy clusters. ( Fabian 2012 ; Dunn & Fabian 2008 ) . This feedback expels gas from the core and heats the intracluster medium (ICM), counteracting radiative cooling and thereby reducing the SFRs as observed. The outflows are intermittent and are triggered by rapid variations in accretion via the process of chaotic cold accretion ( Gaspari et al. 2012 ) . After the cluster cools again, another cycle of feedback is initialed. With sustained AGN feedback, the cluster can become self-regulated, where heating and cooling are globally balanced ( Gaspari et al. 2011 ; Li et al. 2015 ; Prasad et al. 2015 ; Yang & Reynolds 2016b ; Li et al. 2017 ; Beckmann, R. S. et al. 2019 ; Ehlert et al. 2022 ) . Despite its success, the exact AGN heating mechanisms are still not fully understood. Various processes have been proposed, including bubble mixing ( Hillel & Soker 2015 ; Yang & Reynolds 2016b ) , weak shock heating ( Fabian et al. 2003 ; Nulsen et al. 2005 ) , thermal conduction ( Voigt & Fabian 2004 ; Yang & Reynolds 2016a ) , turbulence ( David et al. 2001 ; Kim & Narayan 2003 ) , and cosmic ray heating ( Guo & Oh 2008 ; Pfrommer 2013 ; Ruszkowski et al. 2017 ; Yang et al. 2019 ) . In addition to the relative importance of these mechanisms, some fundamental physical properties of AGN jets, such as jet density, may also play a critical role in determining the overall heating efficiency. Using magnetohydrodynamic (MHD) simulations of self-regulated AGN feedback, Ehlert et al. 2022 suggested that lighter jets can achieve more efficient and isotropic heating of the ICM. However, the question remains: how does jet density directly affect the heating efficiency and isotropy? In this work, to build upon the findings of Ehlert et al. 2022 and to isolate the effect of jet density in a more controlled model, we perform three-dimensional (3D) hydrodynamic (HD) simulations with cold-mode accretion. In both single-jet ejection and self-regulated feedback scenarios, we vary the jet density to closely examine its impact on the heating process. Our results show that lighter jets can indeed heat the cluster more isotropically and influence the heating efficiency. This suggests that jet density is a key parameter in realistic AGN feedback modeling. The outline of this paper is as follows, We summarize the essential elements of our simulation setups in Section 2 . The simulation results of the single-jet and self-regulated setups are presented in Sections 3.1 and 3.2 , respectively. We test the convergence of our results in Section 4.1 , compare with previous studies in Section 4.2 , and discuss the limitations of our simulations in Section 4.3 . Finally, we conclude our findings in Section 5 . 2 Methods We carry out 3D HD simulations for two different models, single-jet and self-regulated AGN feedback in an isolated Perseus-like cluster using the adaptive-mesh-refinement (AMR) code FLASH ( Fryxell et al. 2000 ; Dubey et al. 2008 ) . More details of the simulation setup can be found in Yang et al. 2019 for the single-jet model and Yang & Reynolds 2016b for the self-regulated model. Here, we provide a brief summary and highlight the key differences. The ICM in the cluster is initialized by empirical fits to the surface brightness of the observed Perseus cluster assuming hydrostatic equilibrium with a static NFW ( Navarro et al. 1996 ) gravitaional potential: \Phi(r)=-\frac{GM_{\text{vir}}}{r}\frac{\ln{(1+r/r_{s})}}{\ln(1+c)-c/(1+c)}, (1) where M_{\text{vir}} is the cluster virial mass, r_{s}\equiv r_{\text{vir}}/c is the scale radius, r_{\text{vir}} is the virial radius, and c is concentration parameter. We set M_{\text{vir}}=8.5\times 10^{14}M_{\odot} , r_{\text{vir}}=2440\text{ kpc} , and c=6.81 for both the single-jet and self-regulated models. Since the gas contributes little to gravity, we neglect the self-gravity effect. In both models, we add radiative cooling computed by the tabulated table of Sutherland & Dopita ( Sutherland & Dopita 1993 ) with 1/3 solar metallicity. 2.1 Single-jet setup In the single-jet simulations, the computational domain spans 500 kpc on each side and is adaptively refined based on temperature gradients, reaching up to an AMR level of 8, corresponding to a peak resolution of 0.5 kpc. Reflective boundary conditions are applied; however, due to the relatively short simulation time about 100 Myr, the forward shock generated by the jet injection has not reached the boundary, and the reflected waves are not expected to significantly impact the results. In this single-jet model, we set a fixed jet power of 5\times 10^{45} erg s -1 , jet duration of 10 Myr, and inject the jet mass, momentum, and energy into a cylindrical nozzle at the cluster center with radius of 2 kpc ( r_{\rm ej} ) and height of 4 kpc ( h_{\rm ej} ). The jets are ejected in a bipolar fashion along the z -axis and are assumed to be purely kinetic. Therefore,