Activities of the Korea ALICE group for the development and production of the next-generation silicon tracker
Sanghoon Lim \fnsep for the ALICE Collaboration · 2025
Read Activities of the Korea ALICE group for the development and production of the next-generation silicon tracker by Sanghoon Lim \fnsep for the ALICE Collaboration (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2510-17424.txt.
Introduction
A next generation heavy ion experiment called ALICE 3 is planned for the Large Hadron Collider at CERN, and its tracking system will be far larger than the current one. Sanghoon Lim, writing alone, reports on work by the Korea ALICE group toward building that tracker. The design pairs a precise inner detector, tucked inside the beam pipe on a retractable frame, with a wide outer tracker, both built from thin silicon pixel sensors.
The silicon area will be about five times that of the present tracker, so testing sensors and assembling modules at that scale is the central challenge. Lim describes sensor checks, a packaging machine adapted for fast and accurate sensor placement, and prototype modules. The aim is a production method that can grow to full scale.
Catalog record
| CREATOR | Sanghoon Lim \fnsep for the ALICE Collaboration |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 15 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2510-17424
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Activities of the Korea ALICE group for the development and production of the next-generation silicon tracker Sanghoon Lim \fnsep for the ALICE Collaboration Abstract ALICE 3 is the proposed next-generation heavy-ion experiment at the CERN Large Hadron Collider (LHC), envisioned for operation during Run 5. The tracking system of ALICE 3 will consist of a high-precision vertex detector integrated into a retractable structure inside the beam pipe, complemented by a large-area outer tracker covering a broad pseudorapidity range. Both systems will be based on the Monolithic Active Pixel Sensor (MAPS) technology, building upon the developments realized for the recently upgraded ALICE Inner Tracking System (ITS2) and the future ITS3 upgrade. The total silicon area of the ALICE 3 tracking system is expected to be approximately five times larger than that of ITS2, presenting significant challenges in terms of large-scale sensor testing and module production. To address these challenges, research and development activities have been initiated in Korea, including the adaptation of an automated die-attach machine—commonly used in the semiconductor packaging industry—for efficient sensor-to-substrate assembly. This contribution presents the ongoing efforts of the Korea ALICE group toward the development and production of the ALICE 3 silicon tracker. The scope includes sensor evaluation, automated assembly techniques, and prototype module construction, with the aim of establishing scalable procedures for future mass production. 1 Introduction The ALICE (A Large Ion Collider Experiment) collaboration at CERN is advancing toward its next major upgrade—ALICE 3, planned for LHC Run 5, with the primary goal of conducting high-precision studies of the quark-gluon plasma (QGP) at unprecedented sensitivity levels RefA ; RefB . A central component of this new detector is a state-of-the-art silicon tracking system based on Monolithic Active Pixel Sensors (MAPS), engineered to meet the stringent requirements of high spatial resolution, minimal material budget, fast time response, and radiation tolerance in the high-luminosity environment of future heavy-ion collisions. Figure 1: The schematic view of the ALICE 3 detector. As illustrated in Fig. 1 , the ALICE 3 apparatus will feature a fully integrated suite of detectors optimized for low- p_{\mathrm{T}} tracking and comprehensive particle identification. The detector system includes the Inner and Outer Trackers (both MAPS-based), inner and outer Time-of-Flight (TOF) detectors, Ring Imaging Cherenkov (RICH) detectors, a superconducting magnet, an electromagnetic calorimeter (ECal), a muon identifier (MID) with an integrated hadron absorber, and the Forward Conversion Tracker (FCT) placed within a small dipole magnet. Together, these components will enable ALICE 3 to conduct detailed investigations of QGP properties with enhanced precision and a broader physics reach compared to its predecessors. The ALICE 3 tracking system is designed to meet the stringent performance requirements of reconstructing low-transverse-momentum ( p_{\mathrm{T}} ) particles in the extreme environment of high-multiplicity heavy-ion collisions. The Inner Tracker (IT) delivers unprecedented impact parameter resolution and vertexing performance, which are indispensable for the identification of multi-charm baryons and low- p_{\mathrm{T}} beauty hadrons. Complementing this, the Outer Tracker (OT) extends the overall lever arm of the tracking system, significantly improving momentum resolution and enhancing the robustness of pattern recognition algorithms—both essential for ensuring reconstruction quality across the full detector acceptance. The OT barrel geometry comprises four cylindrical layers positioned at radial distances of 30, 45, 60, and 80 cm. This configuration has been chosen based on detailed simulation studies that demonstrate the necessity of all four layers to preserve tracking performance in both low and high- p_{\mathrm{T}} regimes. Attempts to reduce the number of barrel layers to three—for example, adopting a layout with layers at 30, 50, and 80 cm—were shown to result in a substantial degradation in transverse momentum resolution, especially in the absence of the outermost hit. In contrast, the four-layer design limits the resolution loss to within 20–25%, even in cases of localized failure, thus validating its selection as the baseline layout for the ALICE 3 OT. To further enhance its physics reach, ALICE 3 incorporates forward tracking disks that extend the pseudorapidity coverage up to |\eta|=4 , surpassing the acceptance of previous ALICE configurations. This design ensures nearly continuous geometric coverage and enables long-range correlation measurements with large \eta -gaps and sufficient statistical precision. The OT utilizes Monolithic Active Pixel Sensors (MAPS) developed in the 65-nm CMOS imaging process by Tower Partners Semiconductor Co. (TPSCo), continuing the technological advancements of the ITS3 project. Each sensor has dimensions of approximately 3.2\times 2.5~\mathrm{cm}^{2} , with an additional peripheral region of 3.2\times 0.15~\mathrm{cm}^{2} along its long edge reserved for readout electronics. A single 30-cm wafer accommodates 57 such sensors. Considering a production yield of approximately 67%, the full-scale fabrication will require about 1300 wafers to produce 73,900 sensors for the barrel and 620 wafers to deliver 35,300 sensors for the endcap disks. For the estimates of the numbers of modules and for the R&D on module assembly, a sensor size of 3.2\times 2.5~\mathrm{cm}^{2} is currently considered. The sensor modules for the OT are standardized to support both barrel and endcap implementations. Each module comprises eight sensors arranged in two rows with 200 µm spacing, covering an active area of 12.88\times 5.04~\mathrm{cm}^{2} , or approximately 65 cm². These sensors are bonded to a flexible printed circuit (FPC) and subsequently attached to a high-thermal-conductivity substrate designed with mechanical locators for accurate placement. In total, approximately 5,620 modules are required for the OT barrel, and 2,688 modules are needed to equip 12 replicated endcap disks. Accounting for production yield (85%) and additional units for pre-production and validation, the total number of modules to be fabricated reaches approximately 10,750. Given the large production scale and the need for timely delivery, the module assembly process will be outsourced to industry, and preliminary engagements with commercial vendors have already been initiated. 2 Activities of the Korea ALICE group The Korean ALICE group has participated in the ITS2 project by contributing to ALPIDE sensor testing and the production of Outer Barrel (OB) modules RefC ; RefD , thereby gaining essential experience in silicon detector assembly. The project was successfully executed through collaborations with domestic semiconductor-related companies, including FUREX, C-ON Tech, and MEMSPACK. Building on this experience, the group aims to contribute to the ALICE 3 Outer Tracker (OT) development by promoting the automation and industrialization of module production. During the ITS2 OB production, module assembly was carried out in parallel at five different sites using the ALICIA machine RefE . The precise placement of sensors onto assembly jigs was automated using chip-handling equipment. However, subsequent steps—such as glue dispensing on the Flexible Printed Circuit (FPC) and the attachment of the sensor to the FPC—were performed manually. The adhesive used, Araldite 2011, is a two-component epoxy that requires pre-mixing and a long curing time of approximately five hours, limiting daily production to about two modules per site. In the case of ALICE 3 OT, the number of required modules is approximately five times greater than that of the ITS2 OB. Therefore, significant improvement throughout the production is critical to meet the schedule. The Korean team plans to leverage its prior experience and existing industrial partnerships to enhance production efficiency through greater automation and process optimization. 2.1 Industrialization of module assembly The Korean ALICE group collaborated with MEMSPACK, which participated in the wire bonding process during the ITS2 OB module production, to