Harnessing Oscillatory Dynamics for Reprogrammable Mechanical Functionality
Sophie Monnery, Giada Risso, Loucas Plado Costante, Arnaud Lazarus, Katia Bertoldi · 2025
Read Harnessing Oscillatory Dynamics for Reprogrammable Mechanical Functionality by Sophie Monnery, Giada Risso, Loucas Plado Costante, Arnaud Lazarus, Katia Bertoldi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-26317.txt.
Introduction
Sophie Monnery and co-authors turn swinging pendulums into rewritable mechanical bits, in a 2025 study. Mechanical computing seeks structures whose function can be reset on demand, like data on a hard drive. Past work leaned on two-state blocks, but programming large arrays stayed hard. Here an array of pendulums with uneven boundary rules acts as the bits. Quick timing shifts at the boundary set each bit's state.
With pulses shorter than the swing period, state control comes from timing alone. The team shows free writing of information and even a mechanical piano that plays chosen notes and chords in a few swings. The scheme should extend to membranes and beams.
Catalog record
| CREATOR | Sophie Monnery, Giada Risso, Loucas Plado Costante, Arnaud Lazarus, Katia Bertoldi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-26317
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Harnessing Oscillatory Dynamics for Reprogrammable Mechanical Functionality Sophie Monnery, Giada Risso, Loucas Plado Costante, Arnaud Lazarus, Katia Bertoldi Abstract Structures are usually designed to perform fixed functions determined by their geometry and materials, which remain unchanged even as environmental conditions or performance requirements shift. To overcome this rigidity, researchers have introduced responsiveness directly into structures, for example through smart materials that alter their properties under external stimuli Kim et al. 2018 ; Wu et al. 2021 ; Gladman et al. 2016 or jamming-based mechanisms Brown et al. 2010 ; Wang et al. 2019 ; Brigido-González et al. 2019 . Large deformations and instabilities have also been harnessed to realize tunable or reconfigurable responses Wang et al. 2014 ; Florijn et al. 2014 ; Reis 2015 ; Coulais et al. 2016 ; Faber et al. . Yet these approaches fall short of true mechanical reprogrammability, where structural functions can be dynamically defined, modified, and accessed on demand, akin to rewriting data on a hard drive. To address this challenge, recent efforts have focused on building blocks that act as mechanical analogs of digital bits Yasuda et al. 2021 . Bistable units are particularly attractive because their two stable states naturally replicate binary logic Treml et al. 2018 . Programming arrays of such units has been pursued through two main strategies: individually addressing each bit Chen et al. 2021 , or exploiting interactions between neighboring units to reach desired configurations under global inputs Gorissen et al. 2017 ; Kwakernaak and van Hecke 2023 ; Liu et al. 2024 . The first offers full control but requires complex actuation schemes, while the second reduces actuation demands but often involves intricate loading sequences and nontrivial coupling design. To overcome these limitations, more recently, a dynamic control approach has been introduced that enables arbitrary transitions through global rotational driving cycles Gutierrez-Prieto et al. 2025 . Here we introduce an alternative approach for arbitrarily defining and modifying the state of arrays of mechanical bits, inspired by recent advances in oscillating–diverging systems Lazarus 2019 ; Grandi et al. 2021 ; Grandi et al. 2023 . We investigate arrays of pendula whose boundary conditions break symmetry, effectively transforming them into mechanical bits. When the actuation window is short relative to the natural oscillation timescales, the state of each pendulum can be programmed solely by tuning the timing of global boundary conditions. We show that this approach enables rapid reprogramming, arbitrary information writing, and even the construction of a “mechanical piano” capable of producing user-defined note and chord sequences within just a few oscillation periods. Because it integrates seamlessly with diverse functionalities, this strategy establishes a scalable framework for dynamic, efficient, and reprogrammable mechanical systems. † † lead-author: Monnery Mechanical bits are typically non-volatile, implemented using bistable structures with a double-well energy landscape in which each stable configuration represents a digital state, either state 0 or state 1 Chen et al. 2021 ; Treml et al. 2018 . A key advantage of this approach is that the states are inherently robust and require no external energy to be maintained. However, switching between states requires an external energy input to drive the transition. In contrast, monostable structures exhibit a globally convex energy landscape with a single stable equilibrium configuration (Fig. 1 a). While they are not inherently suited for storing states, they can still be used for mechanical computing by harnessing their predictable harmonic oscillations and associating logical states with the direction of motion Yasuda et al. 2021 . However, due to damping, these oscillations decay over time and persist only when energy is continuously supplied through external excitation, thereby mimicking the behavior of volatile memory Mahboob and Yamaguchi 2008 . A promising pathway towards mechanical reprogrammable systems is to develop a hybrid system that can switch between monostable and bistable energy landscapes through a single control parameter. In this framework, the bistable (double-well) phase serves as a non-volatile regime that stores mechanical information without continuous energy input, while the monostable (single-well) phase introduces volatility and allows the system to be reprogrammed. Figure 1: Mechanical bit. a) Schematic of the globally convex energy landscape of a freely oscillating pendulum. b) Schematic of the energy landscape when the indenter is lowered, breaking the symmetry of the system. c) Experimental time evolution of the pendulum angular motion (left axis) together with the indenter displacement u_{y} (right axis). The pendulum has a natural period T=0.72 s. Insets show snapshots of the pendulum locked in state s=0 at t=7 s and in state s=1 at t=17 s. Here, we present a proof-of-concept for a hybrid mechanical bit that operates by kinematically breaking the symmetry of an oscillating pendulum. Unlike conventional bistable structures, where the geometry itself gives rise to two energy minima Bažant and Cedolin 2010 , a vertically moving indenter introduces the double-well energy landscape in our system. When the indenter is raised, the pendulum oscillates freely and exhibits a single energy minimum when aligned vertically (i.e. at \theta=0 - Fig. 1 a). Lowering the indenter reshapes the energy landscape into two potential wells separated by an effectively infinite energy barrier, thereby locking the pendulum into one of the wells, each corresponding to a distinct state (Fig. 1 b). The well in which the pendulum settles is determined by its angular displacement \theta at the moment of actuation. If the indenter is lowered while \theta is positive, the pendulum is captured to the left of the vertical axis, which we define as state s=1 (Fig. 1 c). If instead it is lowered when \theta is negative, the pendulum settles to the right, corresponding to state s=0 (Fig. 1 c). Thus, by precisely timing the actuation, we can deterministically set the pendulum to either state 0 or 1. Moreover, by raising the indenter, the pendulum is released into free oscillation, allowing the state to be reprogrammed by lowering the indenter again after a specific time window \Delta t (Fig. 1 c and Supplementary video S1). The pendulum retains the same state if \Delta t\in\big[(n-1)T,\,(n-1)T+\tfrac{T}{4}\big]\cup\big[nT-\tfrac{T}{4},\,nT\big] , where T is the natural period of the pendulum and n is a positive integer. Conversely, it switches state if indentation occurs in \Delta t\in\big[(n-1)T+\tfrac{T}{4},\,nT-\tfrac{T}{4}\big] . Figure 2: State programming via desynchronization. a) Temporal evolution of s(t) for three pendula with T_{\mathrm{min}}=0.59 s, T_{\mathrm{mid}}=0.61 s, and T_{\mathrm{max}}=0.64 s. Gray windows indicate intervals \Delta t_{w}=0.1 s during which all three pendula occupy the desired state. b) Experimental temporal evolution of the angular positions \theta(t) of the three pendula. c) Experimental setup of the reprogrammable linear spring. The system is shown in state 101 with three elastomeric spheres positioned on the left side of each pendulum. d) Experimental force–displacement curves (continuous lines) for three hemispherical shells with thickness-to-radius ratio d/R=1 , 0.3, and 0.2 under pendulum indentation. Curves are obtained by taking the mean of three tests. Dashed lines indicate linear fits. e) Experimental force–displacement curves obtained by further lowering the indenter with the system programmed in all 8 states (continuous lines). Predictions from the summed responses of the indented shells are shown as dotted lines. f) Numerical prediction of \Delta t_{\max}=\max(\Delta t) as a function of the pendula natural periods for \Delta t_{w}=0.1 s. Blue and red markers indicate the