Stretching water between two grooves Preprint: August 10, 2026

M.Leonard, D.Maity, N.Vandewalle, T.Truscott · 2025

Read Stretching water between two grooves Preprint: August 10, 2026 by M.Leonard, D.Maity, N.Vandewalle, T.Truscott (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-25864.txt.

Introduction

Matteo Leonard, Dilip Maity, Nicolas Vandewalle, and Tadd Truscott showed in twenty twenty-five that two simple grooves can hold a wide, steady film of water on a vertical plate. Thin water films are prized for cooling, water harvesting, and self-cleaning surfaces because they cover area and drain well. Pure water's high surface tension usually breaks films apart, and past fixes relied on costly coatings or fine patterns.

A pair of laser-engraved grooves anchors the film sideways, with no other treatment. The film stretched over thirty centimeters, more than one hundred capillary lengths, and its thickness could be tuned by flow rate and groove shape. At the grooves' ends, the film cycles through rupture, retraction, and droplet release. Models predict the film's traits well. The method is cheap and scalable.

Catalog record

CREATORM.Leonard, D.Maity, N.Vandewalle, T.Truscott
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-25864

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Stretching water between two grooves Preprint: August 10, 2026 M.Leonard, D.Maity, N.Vandewalle, T.Truscott Abstract Controlling water motion on surfaces is critical for applications ranging from thermal management, passive water harvesting, to self-cleaning coatings. Yet stabilising continuous water films, desirable for their high surface coverage and drainage capacity, remains challenging with pure water, due to its high surface tension. Existing strategies rely on extreme wettability achieved by coating or fine-scale patterning, which are costly, fragile, or complex to scale. A robust, purely geometric solution is still lacking. We demonstrate that a pair of laser-engraved grooves on a moderately hydrophilic vertical substrate can laterally anchor water and stretch a continuous thin film, without any other surface treatment. Once stabilised, the film extends vertically over 100 capillary lengths ( > 30 ​ cm >30\rm{cm} ), with thickness tunable via both flow rate and groove geometry. At the groove extremities, the end of anchoring triggers a cyclic instability, characterised by film rupture, retraction, and droplet release. The thickness of the film and retraction height obey predictive models, while droplet mass varies systematically with spacing and surface tension. This groove-based method offers a straightforward and scalable approach to creating, sustaining, and controlling thin water films. It opens new directions for passive liquid control in condensation, surface cleaning, and 2D millifluidic systems. I Introduction Controlling how water moves across surfaces is essential in both natural and engineered systems. In arid regions, passive water collection devices aim to harvest moisture from the atmosphere through fog Abdul-Wahab et al. 2007 ; Estrela et al. 2009 ; Henschel and Seely 2008 ; Ritter et al. 2008 ; Bintein et al. 2023 and dew collection Beysens et al. 2003 ; Lekouch et al. 2012 ; Haechler et al. 2021 ; Jacobs et al. 2008 ; Maestre-Valero et al. 2011 ; Muselli et al. 2009 . In industry, the efficient removal of condensate is critical for thermal management in systems such as heat exchangers, where stagnant water can degrade performance Hu et al. 2021 ; Orejon et al. 2017 . Even standard coatings, such as paint or water-repellent finishes, are designed to control how water behaves, whether it spreads out or forms droplets, to keep surfaces clean and working properly Zhu et al. 2021 ; Drelich et al. 2011 ; Geyer et al. 2020 ; Choi et al. 2017 . Across these diverse applications, the challenge remains the same: how to guide water where we want it to go, and when we want it to move, using surfaces that are both robust and scalable. On smooth vertical surfaces, water typically adopts one of two classical morphologies depending on the flow rate: isolated droplets at low flow, and continuous rivulets at higher flow Podgorski et al. 2001 ; Snoeijer et al. 2007 ; Ghezzehei 2004 . In contrast, many natural surfaces exhibit complex behaviours thanks to surface texture. Plants and animals use hairs Chen et al. 2018 ; Duprat et al. 2012 , spines Andrews et al. 2011 ; Bai et al. 2020 ; Lee et al. 2022 , and ridges Ang et al. 2019 ; Chen et al. 2016 to manipulate water, enabling directional transport Kern and Carlson 2024 ; Van Hulle et al. 2024 ; Khattak et al. 2024 , enhanced retention Pan et al. 2018 ; Leonard and Vandewalle 2025 , or self-cleaning Barthlott and Neinhuis 1997 . Among these, grooves stand out for their ability to pin contact lines Chen et al. 2005 ; Dai et al. 2018 , guide liquid in well-defined pathways Comanns et al. 2015 ; Dhiman et al. 2018 ; Van Hulle and Vandewalle 2023 and promote capillary imbibition Leonard and Vandewalle 2025 ; Bintein et al. 2019 ; Seemann et al. 2005 . At smaller scales, nano- and microstructured surfaces can promote rapid liquid spreading Nakajima et al. 2016 ; Zhang et al. 2014 , enabling the formation of thin water films Pou‐Álvarez et al. 2025 ; Dorbolo 2021 , a distinct state that lies between discrete droplets and continuous rivulets. Thin films offer several attractive properties: they maximise surface/volume ratio, provide continuous and stable drainage paths, and enhance heat and mass transfer. Yet, despite these advantages, thin films remain difficult to form and sustain, particularly with pure water, which is characterised by a strong surface tension \sigma . Achieving a stable film typically requires extreme surface wettability, often obtained through chemical coatings or nano- and micro-patterning Quéré 2008 ; Shibuichi et al. 1996 . Such structures, even if ubiquitous in nature Koch et al. 2009 , remain difficult and costly to reproduce synthetically. Moreover, these treatments should be effective across the entire surface, as even minor defects may compromise film stability Couvreur and Daerr 2012 ; Vrij and Overbeek 1968 . Most treatments are short-lived, environmentally unsustainable, or prohibitively expensive to scale. In this work, we introduce a novel method for creating thin films. Imagine holding a stretched elastic sheet between your hands. The moment you let go, it snaps back to its rest state. A thin film of water on a smooth surface behaves similarly; it retracts and collapses. To keep the sheet stretched, you only need to fix its edges. Can the same idea apply to water? Yes, and to do so, we will use grooves. We show that this geometric feature, a pair of laser-engraved vertical grooves spaced a few millimetres apart, is sufficient to anchor and stabilise a thin film of water on a moderately hydrophilic substrate (PMMA), as illustrated in Figure 1 (a). Unlike previous strategies that require treating the entire surface, our method uses localised geometry to maintain a continuous film that extends over heights exceeding 100 capillary lengths. The resulting film is not only robust but also tunable, as its thickness can be continuously adjusted by varying the flow rate or the groove geometry. At the bottom of the grooved region, where lateral confinement abruptly ends, the film becomes unstable. This transition triggers a controlled, localised rupture and the release of a droplet, initiating periodic dripping governed by groove spacing. These findings demonstrate that geometric anchoring can hold a thin water film in place. With only a pair of grooves, we can define the film’s shape, tune its thickness, and trigger regular droplet release through localised instability. This approach provides a simple and scalable alternative to superhydrophilic materials, enabling robust and passive water control in systems ranging from condensation management to surface cleaning. II Experimental Setup To study the properties and the edge instability of vertical water films anchored by grooves, we designed a minimal but robust experimental setup. The substrate is a transparent acrylic plate (TroGlass Clear, 3\,\mathrm{mm} thick, colored in light grey in Figure 1 (a)) engraved with two vertical grooves using a \rm{CO}_{2} laser (Trotec Speedy 100). Each groove extends over 115\,\mathrm{mm} and terminates several centimetres above the lower edge to trigger film rupture, as represented in Figure 1 (a). The plates are moderately hydrophilic, with receding and advancing contact angles of \theta_{R}=48\pm 4^{\circ} and \theta_{A}=78\pm 5^{\circ} , respectively, measured using the droplet inflation/deflation method on horizontal plates. We define the groove geometry by three key parameters: the groove depth d , width w , and centre-to-centre spacing s , represented in

Read the complete text