Dipolar Interfacial Excitons in Lateral Semiconductor Heterostructures
Elie Vandoolaeghe, Francesco Fortuna, Suman Kumar Chakraborty, Biswajeet Nayak, Takashi Taniguchi, Kenji Watanabe, Prasana K. Sahoo, Thibault Chervy, Puneet A. Murthy · 2025
Read Dipolar Interfacial Excitons in Lateral Semiconductor Heterostructures by Elie Vandoolaeghe, Francesco Fortuna, Suman Kumar Chakraborty, Biswajeet Nayak, Takashi Taniguchi, Kenji Watanabe, Prasana K. Sahoo, Thibault Chervy, Puneet A. Murthy (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-24465.txt.
Introduction
One-dimensional quantum systems are a bedrock of many-body physics, but carving them from solids leaves disorder and crude confinement. Elie Vandoolaeghe and 8 co-authors report a bottom-up route: such matter emerges at the atomically sharp seam between two monolayer semiconductors. Excitons, bound electron-hole pairs, sit pinned to that junction.
Light measurements resolve the excitons into a ladder of discrete states, proof of nanoscale confinement. They carry huge permanent electric dipoles and drift for microns along the seam only. Adding charge collapses the dipole and cuts the light-emission lifetime twentyfold. That live tunability makes lateral seams a platform for one-dimensional excitonic circuits.
Catalog record
| CREATOR | Elie Vandoolaeghe, Francesco Fortuna, Suman Kumar Chakraborty, Biswajeet Nayak, Takashi Taniguchi, Kenji Watanabe, Prasana K. Sahoo, Thibault Chervy, Puneet A. Murthy |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-24465
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Dipolar Interfacial Excitons in Lateral Semiconductor Heterostructures Elie Vandoolaeghe, Francesco Fortuna, Suman Kumar Chakraborty, Biswajeet Nayak, Takashi Taniguchi, Kenji Watanabe, Prasana K. Sahoo, Thibault Chervy, Puneet A. Murthy Abstract † These authors contributed equally to the work 1 Institute for Quantum Electronics, ETH Zürich, CH-8093 Zürich, Switzerland 2 Quantum Materials and Device Research Lab, Materials Research Center, Indian Institute of Technology, Kharagpur, India 3 National Institute for Materials Science, Namiki 1-1, Tsukuba, 305-0044, Ibaraki, Japan 4 NTT Research, Inc. Physics & Informatics Laboratories, 940 Stewart Dr, Sunnyvale, CA 94085 ∗ Corresponding author: Puneet A. Murthy, [email protected]; Prasana K. Sahoo, [email protected] Interfaces between materials or phases – whether in condensed matter systems, biological membranes, or catalytic surfaces – are rich with phenomena that are fundamentally distinct from those present in the bulk [ 1 ] . In some cases, interfaces host quasiparticles, such as surface plasmons or Majorana fermions, which can significantly influence the material properties. Here, we investigate a unique 1D interface formed between two monolayer 2D semiconductors, MoSe 2 and WSe 2 , and unambiguously observe a new type of excitonic quasiparticle that resides exclusively at the boundary. Our optical measurements reveal several remarkable properties of this interfacial exciton. First, it possesses an in-plane dipole moment with exceptionally large dipole lengths of \approx 2\, nm. The emission spectrum reveals narrow discrete states, indicating strong quantum confinement of the center-of-mass motion across the interface. Power-dependent measurements show a sublinear saturation behavior, reflecting interactions between dipolar excitons in this low-dimensional system. Moreover, the exciton displays striking sensitivity to charge carriers due to its dipolar character. Our results introduce a new platform for exploring interacting 1D dipolar bosonic systems with unique quantum properties and open pathways for novel optoelectronic devices, including applications in nonlinear quantum photonics. Dimensionality plays a fundamental role in shaping the properties of many-body systems. Since most bulk materials are three-dimensional, interfaces between them typically exhibit two-dimensional surface effects such as Shockley and Tamm surface states in silicon, 2D electron gases (2DEGs) at GaAs/AlGaAs heterojunctions, topological surface states, and surface plasmon polaritons at metal-dielectric interfaces [ 2 , 3 , 4 , 5 ] . Truly one-dimensional interfaces are rare - for instance quantum hall edge states in 2DEGs - as they require the underlying bulk materials or phases to be inherently two-dimensional. Realizing such interfaces with tunable material platforms could enable exploration of new phenomena and open the door to novel applications. The advent of atomically thin van der Waals materials, especially transition-metal dichalcogenides (TMDs), has paved the way for investigating such interface physics in semiconductor materials. To date, most research on van der Waals materials has focused on vertically stacked heterostructures, which give rise to a range of phenomena from interlayer excitons to strongly correlated electrons in moiré superlattices [ 6 , 7 ] . However, recent advances in Chemical Vapor Deposition (CVD) have enabled the growth of unique lateral TMD heterostructures, where two direct bandgap monolayer semiconductors, such as MoSe 2 and WSe 2 , are seamlessly joined laterally by an atomically sharp interface. The one-dimensional interface between two-dimensional materials can be just a few nanometers wide while extending over tens of microns [ 8 , 9 , 10 , 11 ] . An example micrograph of a CVD-grown monolayer lateral heterostructure (LHS) is shown in Fig. 1 a . Here, the inner triangular region of monolayer MoSe 2 is surrounded by a triangular monolayer WSe 2 region. In the inset, we show a High Angle Angular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM) scan of a typical atomically sharp interface. Details on the CVD growth and interface properties are given in the Supplementary Information. These lateral heterostructures feature a type-II band alignment [ 12 ] , with the conduction band minimum in MoSe 2 and the valence band maximum in WSe 2 , as illustrated in Fig. 1 b . The optical properties of monolayer MoSe 2 and WSe 2 are well understood, with both materials supporting strongly bound direct excitons with large oscillator strengths [ 13 ] . The central question of this work is: what is the optical response at the 1D interface where these two semiconductors meet? Does the interface simply reflect a sum of the optical responses of the individual materials, or do new states emerge? Figure 1: Atomically sharp 2D semiconductor lateral interfaces . a Micrograph of a CVD-grown lateral heterostructure (LHS) of monolayer MoSe 2 and WSe 2 . Inset: High Angle Angular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM) image of an atomically sharp interface. b Band edge diagram of the LHS near the interface, illustrating type-II alignment. The neutral excitons in both 2D bulk materials are denoted as X_{\mathrm{Mo}} and X_{\mathrm{W}} . At the lateral interface, a new excitonic state X_{\mathrm{LI}} is predicted, where the electron and hole are bound by Coulomb attraction but reside on separate materials. c Schematic of the LHS, illustrating the electron and hole reduced wavefunctions. Due to spatial separation of charges, a permanent dipole moment d_{e-h} is expected. This problem has been examined theoretically in several previous studies [ 14 , 15 , 16 , 17 , 18 ] . To gain an intuitive understanding, we consider the potential energy landscape experienced by an electron (or hole) across the interface [ 15 , 17 ] (see Fig. 1 b ). The potential energy consists of two main contributions: the electron-hole Coulomb interaction potential ( V_{\mathrm{C}} ) responsible for strong exciton binding energy; and the band-offset potential ( V_{\mathrm{BO}} ) between the band edges of the two monolayers. The band-offset effectively acts as a steep repulsive potential barrier for both electrons and holes, keeping them apart, and thus counteracting the Coulomb attraction. The optical excitations in this region are therefore determined by the interplay between these opposing energy scales. When the band offset V_{\mathrm{BO}} is much smaller than V_{\mathrm{C}} , the excitonic properties should resemble that of the 2D exciton. However, when V_{\mathrm{BO}} becomes comparable to or larger than the Coulomb attraction (characterized by the direct exciton binding energy, E_{\mathrm{B}}\sim 200\, meV [ 17 ] ), a new stable excitonic state X_{\mathrm{LI}} is expected to form at the Lateral Interface (LI). This is a charge-transfer type exciton consisting of a Coulomb-bound electron and hole, each residing in separate regions; the electron in MoSe 2 and the hole in WSe 2 . The band-offset compensates for the reduced Coulomb binding (due to spatial separation), making X_{\mathrm{LI}} the lowest energy optical excitation in the system. The precise conditions for the occurrence of interface excitons have been detailed in Refs [ 15 , 17 ] . An important consequence of spatial separation of charges (distance, d_{e-h} ) is that the interface excitons possess a permanent in-plane dipole moment perpendicular to the interface, \vec{p}_{x}=e\,\vec{d}_{e-h} . The resulting reduced exciton wavefunction is illustrated in Fig. 1 c , with the electron and hole wavefunctions occupying separate regions, and hence having vanishing overlap. Although this scenario may appear analogous to interlayer excitons in vertical TMD heterostructures [ 19 , 20 , 6 ] , there are several fundamental differences. First and foremost, LI excitons are trapped along a 1D interface, leading to dimensional effects such as 1D density of states and