Penalized Weighted Trace Minimization for Optimal Control Device Design and Placement

James Cheung · 2025

Read Penalized Weighted Trace Minimization for Optimal Control Device Design and Placement by James Cheung (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-23477.txt.

Introduction

Placing control devices well is an optimization task built on a Riccati equation, a classic tool in control theory. James Cheung, the sole author, builds a framework to tell when such problems are well-posed, meaning a unique best answer exists. The setting is infinite-dimensional linear quadratic control. First, Cheung proves well-posedness for a new strong form of the time-independent operator Riccati equation.

That result opens the door to trace-class operator tools and the Lagrange multiplier method. With them, he finds conditions for unique solutions in two classes of penalized trace minimization problems. These problems cover both where control devices should go and how they should be designed.

Catalog record

CREATORJames Cheung
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE96 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-23477

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Penalized Weighted Trace Minimization for Optimal Control Device Design and Placement Thanks: The material presented in this paper was developed independently by the author and is not associated with any work related to his affiliated organization. James Cheung Abstract . In this paper, we present a new analytical framework for determining the well-posedness of constrained optimization problems that arise in the study of optimal control device design and placement within the context of infinite dimensional linear quadratic control systems. We first prove the well-posedness of the newly minted ”strong form” of the time-independent operator-valued Riccati equation. This form of the equation then enables the use of trace-class operator analysis and the Lagrange multiplier formalism to analyze operator-valued Riccati equation-constrained optimization problems. Using this fundamental result, we then determine the conditions under which there exists unique solutions to two important classes of penalized trace minimization problems for optimal control device placement and design. 1. Introduction The purpose of the work is to address the fundamental question of well-posedness for optimization problems associated with optimal sensor and actuator placement and design in the context of infinite-dimensional linear systems theory. To consolidate definitions, we will collectively refer to sensors and actuators as control devices . In the context of the linear quadratic regulator (LQR), the optimization problem of interest is the following: \min_{p\in\mathcal{P}}\left\{\min_{u(\cdot)\in\mathscr{L}(\mathbb{R}_{+};U)}\int_{0}^{+\infty}\left[\left({z(t),\mathbf{Q}z(t)}\right)_{H}+\left({u(t;p),\mathbf{R}u(t;p)}\right)_{U}\right]dt\right\} subject to \left\{\begin{aligned} \frac{\partial z}{\partial t}&=\mathbf{A}z(t)+\mathbf{B}(p)u(t;p)\\ z(0)&=z_{0}\end{aligned}\right., for all t\in[0,\infty) ; where denoting H , U , and \mathcal{P} as separable Hilbert spaces associated with the state, control, and parameter respectively, we define p\in\mathcal{P} to be the generalized design parameter (e.g. actuator placement or geometric design variables), z(\cdot)\in H to be the state variable, u(\cdot;p)\in L^{2}(\mathbb{R}_{+};H) to be the control variable, \mathbf{Q}\in\mathscr{L}^{s}(H) to be the output operator, \mathbf{R}\in\mathscr{L}(U) to be the control weighting operator, \mathbf{B}(p)\in\mathscr{L}(U;H) to be the parametrized control operator associated with the control device (e.g. sensors or actuators), and \mathbf{A}:\mathcal{D}(\mathbf{A})\rightarrow H to define the state process as the generator of a C_{0} -semigroup. The Dynamic Programming Principle determines that the optimal control, for a fixed value p\in\mathcal{P} , is given by u_{opt}(t;p)=-\mathbf{R}^{-1}\mathbf{B}^{*}(p)\mathbf{X}(p)z(t), where \mathbf{X}(p)\in\mathscr{L}(H) is the solution to the weak form operator-valued Riccati equation \left({\phi,\left[\mathbf{A}^{*}\mathbf{X}(p)+\mathbf{X}(p)\mathbf{A}-\mathbf{X}(p)\mathbf{B}(p)\mathbf{R}^{-1}\mathbf{B}(p)\mathbf{X}(p)_{+}\mathbf{Q}\right]\psi}\right)_{H}=0. for all \phi,\psi\in\mathcal{D}(\mathbf{A}) . It then follows [ 9 , Theorem 6.2.4] that \displaystyle\min_{u(\cdot)\in L(\mathbb{R}_{+};U)}\int_{0}^{+\infty}\left[\left({z(t),\mathbf{Q}z(t)}\right)_{H}+\left({u(t;p),\mathbf{R}u(t;p)}\right)_{U}\right]dt \displaystyle=\left({z_{0}\mathbf{X}(p)z_{0}}\right)_{H} \displaystyle=\texttt{trace}\left(\mathbf{X}(p)\mathbf{W}\right), where \mathbf{W}(\cdot):=z_{0}\left({z_{0},\cdot}\right)_{H} is the operator generated through the exterior product using the initial condition of the system z_{0}\in H . With these combined observations, the optimal actuator placement and design problem becomes \min_{p\in\mathcal{P}}\texttt{trace}\left(\mathbf{X}(p)\mathbf{W}\right) subject to \left({\phi,\left[\mathbf{A}^{*}\mathbf{X}(p)+\mathbf{X}(p)\mathbf{A}-\mathbf{X}(p)\mathbf{B}(p)\mathbf{R}^{-1}(p)\mathbf{B}(p)^{*}\mathbf{X}(p)+\mathbf{Q}\right]\psi}\right)_{H}=\mathbf{0}, for all \phi,\psi\in\mathcal{D}(\mathbf{A}) . This same optimization problem, albeit with \mathbf{A} and \mathbf{A}^{*} switched in the statement of the operator-valued Riccati equation carries over to the setting of optimal sensor placement and design for linear state estimation systems (i.e. in the context of the Kálmán filter). Therefore, the study of operator-valued Riccati equation constrained weighted trace minimization problems has broad reaching implications in designing optimal systems for both control and state estimation. The problem of optimal device placement and design has its origins in the work of [ 2 ] , where the notion of optimal sensor placement has been introduced for infinite-dimensional systems. This theory was then extended to actuator placement in LQR systems in [ 16 ] . Additional notable extensions of the theory have been made to device placement in \mathcal{H}_{\infty} control systems [ 13 ] and joint parameter estimation and sensor placement in partially observed systems [ 18 ] . The theory of optimal device placement and design has been applied to many practical problems including optimizing thermal control [ 14 ] , vibration damping [ 17 ] , and mobile sensor [ 4 ] systems. A general observation made when studying the existing literature on optimal device placement and design indicates that a constrained optimizer p_{opt}\in\mathcal{P} that minimizes the weighted operator trace of \mathbf{X}(p) can be shown to exist; however uniqueness of the optimizer is almost always left as an open problem. This is the key motivator for writing this paper. We approach the problem of determining the conditions by which a unique solution to the constrained trace minimization problem associated with optimal device placement and design through penalization techniques. The first problem we study is the control penalization problem, i.e., to seek a constrained minimizer to \mathcal{J}_{\beta}(p)=\texttt{trace}\left(\mathbf{X}(p)\mathbf{W}\right)+\frac{\beta}{2}\left\|p\right\|^{2}_{\mathcal{P}}, where we have introduced the penalization parameter \beta\in\mathbb{R}_{+} to regularize the cost functional. This penalization scheme is a classical technique used to improve the conditioning of optimization problems that arise in inverse problems [ 15 ] and optimal control [ 19 ] . We demonstrate in § 4 that the expected result of choosing \beta sufficiently large induces uniqueness of the constrained minimizer p_{opt}\in\mathcal{P} . The study of the first penalized optimization problem will form the pedagogical basis for the second problem discussed in this work: the determination of conditions by which an unique optimizer p_{opt}\in\mathcal{P} exists on constraint manifolds defined by \texttt{trace}\left(\mathbf{B}(p)\mathbf{R}^{-1}(p)\mathbf{B}^{*}(p)\right)=\gamma, where \gamma\in\mathbb{R}_{+} is a positive constant. This constraint on \mathbf{B}(p)\mathbf{R}^{-1}\mathbf{B}^{*}(p) serves the practical purpose of constraining the so-called gain of the control device, e.g. the amount of control effort used by the control feedback law. Following the theme of penalization, this additional trace constraint is approximately enforced through the following penalized cost functional \mathcal{J}_{\beta}(p)=\texttt{trace}\left(\mathbf{X}(p)\mathbf{W}\right)+\frac{\beta}{2}\left[\texttt{trace}\left(\mathbf{B}(p)\mathbf{R}^{-1}(p)\mathbf{B}^{*}(p)\right)-\gamma\right]^{2}. Exact constraint enforcement is achieved in the limit as \beta\rightarrow+\infty . We determine the conditions under which there exists a unique constrained minimizer to this cost functional in § 5 . The penalization introduced in the second problem serves primarily as a mechanism to determine uniqueness on the additional constraint manifold. The constrained optimization problems are cast into the Lagrange multiplier formalism to study the two penalized constrained trace minimization problems posed in the previous section. A fixed-point argument (c.f. the Banach fixed point theorem [ 7 , Theorem 3.7-1] ) is used to determine the uniqueness of the solution to the associated first-order optimality system associated with the Lagrangian functional for each problem. The second-order sufficient optimality condition is then applied to determine that the unique solution of the first-order optimality system is indeed a minimizer. While this strategy is sound at first glance, we quickly run into technical issues when attempting to apply the Lagrange multiplier formalism to the operator-valued Riccati equation. The problem is that a sufficiently “strong” form of this equation, i.e. of the form \mathbf{A}^{*}\mathbf{X}+\mathbf{X}\mathbf{A}-\mathbf{X}\mathbf{B}\mathbf{R}^{-1}\mathbf{B}^{*}\mathbf{X}+\mathbf{Q}=\mathbf{0}, has not been shown to be well-posed on all of the Hilbert space H associated with the state of the system. This inhibits the use of the appropriate trace-class operator analytic tools required to rigorously derive the first-order optimality system associated with the constrained optimization problems discussed in this work. The prior literature (see e.g. [ 3 ] ) only indicates that the operator-valued Riccati equation (without appealing to its Bochner integral form [ 5 ] ) is only well-defined as an operator equation whose domain is defined on \mathcal{D}(\mathbf{A}) . However, we are able to overcome this technical hurdle in this work by determining that the “strong” form of the operator-valued Riccati equation is in fact well posed in Theorem 1 . The structure of the paper is the following: First, we begin in § 2 with the notation that will be used throughout the work, then in § 3 we analyze the well-posedness of the strong form of

Read the complete text