Tunable optical lattices for the creation of matter-wave lattice solitons

Robbie Cruickshank, Arthur La Rooij, Ethan Kerr, Timon Hilker, Stefan Kuhr, Elmar Haller · 2025

Read Tunable optical lattices for the creation of matter-wave lattice solitons by Robbie Cruickshank, Arthur La Rooij, Ethan Kerr, Timon Hilker, Stefan Kuhr, Elmar Haller (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-22471.txt.

Introduction

Robbie Cruickshank and 5 co-authors built a flexible light lattice to make and study matter-wave solitons. A soliton is a wave packet that holds its shape as it moves. Their lattice works like an accordion: its spacing can be tuned over a wide range, as can its depth. The team details how they calibrate the lattice as the spacing changes.

They also prepare exact atom counts site by site using microwave pulses. Fast jumps in atom interaction strength and trap shape then create bright solitons in the lattice. By tuning jump length and final interaction strength, they found settings that keep solitons most stable. The setup suits controlled studies of nonlinear wave dynamics.

Catalog record

CREATORRobbie Cruickshank, Arthur La Rooij, Ethan Kerr, Timon Hilker, Stefan Kuhr, Elmar Haller
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE43 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-22471

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tunable optical lattices for the creation of matter-wave lattice solitons Robbie Cruickshank, Arthur La Rooij, Ethan Kerr, Timon Hilker, Stefan Kuhr, Elmar Haller Abstract We present experimental techniques that employ an optical accordion lattice with dynamically tunable spacing to create and study bright matter-wave solitons in optical lattices. The system allows precise control of lattice parameters over a wide range of lattice spacings and depths. We detail calibration methods for the lattice parameters that are adjusted to the varying lattice spacing, and we demonstrate site-resolved atom number preparation via microwave addressing. Lattice solitons are generated through rapid quenches of the atomic interaction strength and the external trapping potential. We systematically optimize the quench parameters, such as duration and final scattering length, to maximize soliton stability. Our results provide insight into nonlinear matter-wave dynamics in discretized systems and establish a versatile platform for the controlled study of lattice solitons. I Introduction Solitons are localized, non-dispersive wave packets that preserve their shape during propagation due to a balance between dispersion and nonlinearity. First observed in shallow water waves by Russell in 1834 Russell 1845 , solitons have since been realized in a wide range of physical systems, including plasmas Ikezi 1973 , nonlinear optical media Mollenauer et al. 1980 ; Duree et al. 1993 , and biological cells Kuwayama and Ishida 2013 . In Bose–Einstein condensates (BECs), solitons arise as nonlinear matter-waves governed by the Gross–Pitaevskii equation with two prominent examples Kartashov et al. 2011 . Firstly, bright matter-wave solitons, which are localized density peaks on a low-density background, have been subject of extensive experimental and theoretical investigations Abdullaev et al. 2005 , studying their formation Bradley et al. 1997 ; Khaykovich et al. 2002 , collapse dynamics Sackett et al. 1998 ; Gerton et al. 2000 ; Donley et al. 2001 , collisions Nguyen et al. 2014 , and interactions with external potentials, such as reflection and transmission at barriers Marchant et al. 2013 ; Marchant et al. 2016 , among other phenomena Strecker et al. 2002 ; Cornish et al. 2006 . Secondly, dark matter-wave solitons are characterized by density dips accompanied by a phase slip in a higher-density background Jackson et al. 1998 and have been created Burger et al. 1999 ; Denschlag et al. 2000 and observed interacting with other solitons Becker et al. 2008 ; Weller et al. 2008 . Various techniques have been used to realize matter-wave solitons, including rapid or adiabatic changes in the atomic interaction strength Khaykovich et al. 2002 ; Di Carli et al. 2019 ; Luo et al. 2020 , phase imprinting Burger et al. 1999 ; Denschlag et al. 2000 , and the exploitation of modulational instabilities in the carrier medium Nguyen et al. 2017 . Over the last decades, substantial theoretical research has been dedicated to investigating solitons in the presence of a periodic potentials Trombettoni and Smerzi 2001 ; Ahufinger et al. 2004a ; Salasnich et al. 2007 ; Maluckov et al. 2008 . These so-called lattice solitons have been identified in various physical systems, from molecular chains Davydov and Kislukha 1973 ; Kruglov 1984 to nonlinear optical waveguides Eisenberg et al. 1998 ; Morandotti et al. 1999 ; Fleischer et al. 2003 , and quantum gases in optical lattices Trombettoni and Smerzi 2001 ; Ostrovskaya and Kivshar 2003 ; Eiermann et al. 2004 . They exist in both one and two dimensions Ahufinger et al. 2004b ; Baizakov et al. 2003 ; Morandotti et al. 1999 ; Fleischer et al. 2003 , and exhibit intricate transport behavior Trombettoni and Smerzi 2001 ; Ahufinger et al. 2004b ; Brazhnyi and Malomed 2011 ; Franzosi et al. 2011 . We have recently reported the first observation of this novel type of soliton in quantum gases with attractive interactions Cruickshank et al. 2025 . There, we were able to accurately prepare atoms in a defined number of lattice sites to demonstrate two types of lattice solitons: single-site and multi-site which span one and many sites respectively. To achieve this, a rapid quench from repulsive to attractive interactions was utilized, accompanied by the removal of axial confinement along the lattice direction. We found that the stability of the resulting lattice solitons depends critically on the overlap between the initial wavefunction and the target soliton density profile. Imperfect matching leads to breathing dynamics, while strong mismatch can result in collapse or dispersion. In this article, we present our preparation procedure for the generation of lattice solitons. Our approach utilizes an accordion lattice with tunable spacing d_{\text{L}} [Fig. 1 (a) and (b)] Fallani et al. 2005 ; Al-Assam et al. 2010 ; Ville et al. 2017 , which allows us to prepare an initial state with a well-defined number of occupied lattice sites and densities, and to magnify the wavefunction for an improved detection of the soliton’s density distribution. Accordion lattices provide a versatile tool for cold-atom experiments in preparation and imaging schemes Fallani et al. 2005 ; Williams et al. 2008 ; Li et al. 2008 ; Peil et al. 2003 . They operate by varying the angle \theta_{\text{L}} between two interfering laser beams, which generate the lattice potential through a periodic intensity pattern. Several methods for controlling \theta_{\text{L}} have been demonstrated, including adjusting the relative angle between two mirrors Fallani et al. 2005 ; Huckans et al. 2009 , changing the beam separation with a translating stage Li et al. 2008 ; Ville et al. 2017 , and employing an acousto-optic deflector (AOD) Williams et al. 2008 ; Al-Assam et al. 2010 . In our setup, we combine the mechanically stable beam-splitting setup of Ref. Ville et al. 2017 with the fast angle control provided by an AOD [Fig. 1 (b)]. We achieve a tunable lattice spacing d_{\text{L}}=1.4(2)\,\upmu m to 43.1(4)\,\upmu m, allowing access both to Bose–Hubbard physics with short tunneling times and to individual potential wells of atoms with long tunneling times, suitable for resolving individual lattice sites. The key steps and variations of our preparation procedure are illustrated in Fig. 1 (d)-(g). We begin with a Bose-Einstein condensate loaded into a 1D optical lattice with a spacing d_{\text{L}}=3\,\upmu m that is below the resolution limit of our absorption images [Fig. 1 (d)]. Spatially selective microwave transitions in combination with resonant laser light are then used to prepare atoms in a well-defined number of lattice sites. To create single-site solitons, we confine the atoms to a single site [Fig. 1 (e)], whereas for multi-site solitons we typically prepare them on three to five sites [Fig. 1 (f)]. Gray solitons, which are moving dark solitons with reduced density dip Busch and Anglin 2000 , can also be prepared by selectively removing atoms from a single site [Fig. 1 (g)]. Finally, we quench the interaction strength and remove the axial confining potential to create attractive lattice solitons. Figure 1: Experimental setup and preparation schemes. (a) Configuration of laser beams and coils, and (b) of the accordion lattice. A beam is diffracted by an acousto-optical deflector (AOD) and split into two parallel beams by polarizing beam splitters (PBS). These beams are focused by a lens (L1) onto the atomic cloud and interfere creating the accordion lattice potential. (c) Schematic of the optical lattice and

Read the complete text