Cu 2 XSiS 4 (X = Ge, Sn, and Pb) materials for solar-cell applications: A DFT+SCAPS-1D simulation
H. Laltlanmawii, L. Celestine, R. Zosiamliana, B. Chettri, S. Bhattarai, K. C. Bhamu, D. P. Rai · 2025
Read Cu 2 XSiS 4 (X = Ge, Sn, and Pb) materials for solar-cell applications: A DFT+SCAPS-1D simulation by H. Laltlanmawii, L. Celestine, R. Zosiamliana, B. Chettri, S. Bhattarai, K. C. Bhamu, D. P. Rai (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-20845.txt.
Introduction
New solar cell materials are often tested on a computer long before anyone grows them in a lab. H Laltlanmawii and six co-authors screen a family of copper-based compounds in a 2025 simulation study. The compounds pair copper and silicon with germanium, tin, or lead, plus sulfur.
Using density functional theory, the team computes structure, electronic behavior, light absorption, and mechanical strength. Molecular dynamics checks confirm the compounds stay stable at room temperature. Their band gaps fall in a range suited to harvesting sunlight. The authors report the germanium and tin variants as photovoltaic candidates for the first time. A device simulator then estimates how solar cells built from these materials might perform.
Catalog record
| CREATOR | H. Laltlanmawii, L. Celestine, R. Zosiamliana, B. Chettri, S. Bhattarai, K. C. Bhamu, D. P. Rai |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 43 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-20845
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Cu 2 XSiS 4 (X = Ge, Sn, and Pb) materials for solar-cell applications: A DFT+SCAPS-1D simulation Preprint: APS/123-QED H. Laltlanmawii, L. Celestine, R. Zosiamliana, B. Chettri, S. Bhattarai, K. C. Bhamu, D. P. Rai Abstract By means of the first-principles density functional theory (DFT), I 2 -II-IV-VI 4 type Cu-based quaternary chalcogenides Cu 2 XSiS 4 (X = Ge, Sn, and Pb) have been thoroughly investigated. We report the study of Ge and Sn substitution in the divalent cation site for their potential applications in photovoltaics for the first time. The structural, electronic, optical, and mechanical properties have been calculated. The structural and thermal stability is verified by calculating the elastic constants, formation energy and total potential energy at 300 K from the ab-initio molecular dynamics (MD) simulation. The compounds under our investigation exhibited an indirect band gap in the range of 1.0–1.56 eV, suitable for energy harvesting by trapping the sunlight. The presence of absorption peaks within the visible region complements their potential in photovoltaic applications. For further validation, we have designed a model of a heterostructure (FTO/TiO 2 /Cu 2 XSiS 4 /CuO/Au) solar cell, and a numerical simulation has been performed by solving the Poisson equation and continuity equations to obtain the I-V characteristic by using SCAPS-1D. All the inputs needed for solar-cell simulation in SCAPS-1D have been taken from the DFT results. The corresponding Power Conversion Efficiency (PCE) is denoted by η \eta % and their respective values for X=Ge, Sn and Pb are 23.46%, 23.29% and 22.60%, at room temperature. The Ge-based system exhibits the highest η \eta %, owing to its band gap value in the visible range of the solar spectrum. Thus, we report that Ge-based compounds may act as a promising absorber layer in heterostructure solar-cell applications. I Introduction As the global demand for green and surplus energy sources is growing over time, solar energy harvesting has emerged as a possible alternative alongside other renewable resources such as wind Su et al. 2025 , hydroelectricity Ge et al. 2025 , geothermal Anya et al. 2025 , and biomass energy Ahmadipour et al. 2025 ; Ratnesh et al. 2025 . Solar energy is clean and pollution-free, as opposed to traditional energy sources such as fossil fuels, which affect the environment by emitting greenhouse gases and causing climate change, as well as air and water pollution Al-Ezzi and Ansari 2022 . However, due to the inherent variability of sunlight, an energy storage device is required to perpetually use solar electricity Sajitha et al. 2024 . This can be performed by photovoltaics (PV), a technology that converts sunlight directly into electrical energy using semiconductor materials Dambhare et al. 2021 . First-generation silicon solar cells continue to dominate commercial PV technology, with a power conversion efficiency of 26% Liang et al. 2025 . Thin Film Solar Cells (TFSCs) have also emerged as a promising candidate; nevertheless, the market shares of CdTe are 5% and Copper-Indium-Gallium-Selenide (CIGS) solar cells are just 2%, which is significantly lower than those of Si-based solar cells of over 90% Maalouf et al. 2023 . This can be attributed to their lower power conversion efficiency (PCE) (22% for CdTe and 23.4% for CIGS Nakamura et al. 2019 ), Cd toxicity Tai et al. 2025 , and the scarcity of elements such as Indium, Gallium, and Tellurium, which limit their potential for low-cost and high-volume manufacturing Paul et al. 2024 . Generally, the development of a new earth-abundant and non-toxic compound to further improve the performance and cost characteristics of TFSCs consists of expanding the semiconductor through the cross-substitution technique. This involves the replacement of an element with two other elements while maintaining the octet rule and a consistent atom ratio. Hossain et al. 2025 ; Ghorbani 2020 Due to the scarcity of In and Ga, a cross-substitution aimed at the trivalent metal cation site by Zn(II) and Sn(IV) in Cu(In/Ga)S 2 (CIGS) results in quaternary chalcogenides Cu 2 ZnSnS 4 known as Kesterite or CZTS. Saparov 2022 CZTS has gained significant interest in the PV world as they are made up of environmentally friendly elements, along with a high absorption coefficient of 10 -4 cm -1 and a direct band gap (1.0 - 1.6 eV), which is favourable for absorbing solar radiation. Fatima et al. 2025 While the Shockley-Queisser limit for Kesterite is 31%, the power conversion efficiency remains at 14.9%, which is significantly lower compared to the parent CIGS. Yao et al. 2025 The main technical barrier is the complexity of the crystal chemistry: the fact that CZTS combine four different elements (Cu, Zn, Sn, and S/Se) leads to cation disorder, Bosson et al. 2017 phase instability, Gupta and Mohanty 2019 and voltage losses. Yang et al. 2017 These are difficult to design without sophisticated synthesis techniques and a deeper theoretical grasp of defect physics. Chennangod et al. 2025 CZTS is thermally stable with a larger band gap than its Cu 2 ZnSnSe 4 (CZTSe) and Cu 2 ZnSn(S,Se) 4 (CZTSSe) counterparts. On the other hand, CZTSe has a lower band gap and which is better suited for infrared absorption with a lower open-circuit voltage. CZTSSe is a combination of sulfur and selenide in the anionic composition, and they offer band gap tuning by varying the S/Se ratio, balancing voltage and current. Ji et al. 2013 ; Grossberg et al. 2019 ; Simya et al. 2015 Challenges like cation disorder and defect passivation remain crucial for all three types of Kesterite. Wei et al. 2023 ; Dale et al. 2009 ; Zhou et al. 2013 For improving the device performance, a theoretical solar cell module has been designed and simulated using the SCAPS-1D program by many researchers. Khan et al. 2026 ; Singh and Kulshrestha 2025 ; El Ouarie et al. 2023 To achieve a realistic PV response, a variation in minority carrier lifetime, defect concentration, interface, and layer thickness can be introduced to optimize device performance. Kukreti et al. 2021 ; Guerroum et al. 2023 The conventionally used CdS buffer layer has non-optimal band alignment with the absorber layer in kesterite-based solar cells, in addition to being toxic, which limits their efficiency. To address this issue, Tseberlidis et al . introduced TiO 2 as a suitable buffer layer for solar cell heterostructure. Tseberlidis et al. 2023 Recently, Lofty et al . has reported the efficiency above 30% by using TiO 2 as electron transport layer (ETL), CuO as hole transport layer, and optimized different parameters such as thickness, carrier concentration, band gap etc. Lofty A. et al. 2025 Employing MoO x as back surface and Au as back contact have also been found to enhanced PCE. Ait Abdelkadir and Sahal 2023 ; Tarekuzzaman and Utsho 0 Arockiadoss et al . shows that oxide (Cu 2 O) enhances performance with efficiency reaching about 18.48% when used as a hole transport layer. Arockiadoss et al. 2025 Aside from the absorber layer, kesterite materials are also found to be an excellent HTL material in solar cells. Dixit et al. 2023 ; Mahsar et al. 2025 Jakalase et al . utilised CZTSe, CZTSSe, CNTS and CFTS as HTL in Quantum dot-sensitized solar cells (QDSSCs). With a PCE of 25.86%, the CFTS material was