High pressure lattice dynamics study of few layer- α \alpha -In 2 Se 3
Shiyu Feng, Anurag Ghosh, Gautham Vijayan, Ziyi Xu, Qian Zhang, Elad Koren, Elissaios Stavrou · 2025
Read High pressure lattice dynamics study of few layer- α \alpha -In 2 Se 3 by Shiyu Feng, Anurag Ghosh, Gautham Vijayan, Ziyi Xu, Qian Zhang, Elad Koren, Elissaios Stavrou (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-19969.txt.
Introduction
Squeezing a layered crystal can flip its structure, and morphology decides how cleanly the flip happens. Shiyu Feng and six co-authors press few-layer indium selenide inside a diamond anvil cell to sixty gigapascals. Raman spectroscopy tracks the lattice vibrations under load. Atomic force microscopy and Raman together gauge each flake's thickness.
The thin flakes follow the same structural sequence as bulk powder. One transition, though, fires abruptly in flakes where the bulk smears it across a wide pressure range. The authors blame specimen form: single crystal versus powder. Their method for high-pressure Raman work on tiny flakes is part of the contribution. Phase-change materials serve memory and switching devices, so knowing which form flips sharply matters.
Catalog record
| CREATOR | Shiyu Feng, Anurag Ghosh, Gautham Vijayan, Ziyi Xu, Qian Zhang, Elad Koren, Elissaios Stavrou |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-19969
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
High pressure lattice dynamics study of few layer- α \alpha -In 2 Se 3 Shiyu Feng, Anurag Ghosh, Gautham Vijayan, Ziyi Xu, Qian Zhang, Elad Koren, Elissaios Stavrou Abstract Few-layer α \alpha -In 2 Se 3 has been studied under pressure using Raman spectroscopy in a diamond anvil cell up to 60 GPa (at room temperature). A combination of AFM and Raman was used to estimate the thickness of the specimens. While few-layer α \alpha -In 2 Se 3 shows identical structural evolution with the one of the bulk powder-like form of α \alpha -In 2 Se 3 ( α \alpha → \rightarrow β ′ \beta^{{}^{\prime}} → \rightarrow IV ), an abrupt β ′ \beta^{{}^{\prime}} → \rightarrow IV phase transition (at 45 GPa) was observed, in contrast with the case of the bulk specimen where the two phases coexist over a wide pressure range. This is attributed to the difference in specimens morphology, i . e . i.e. single crystal and powder in the case of few-layer and bulk α \alpha -In 2 Se 3 , respectively. This study documents the significance of specimens morphology on the observed pressure-induced phase transitions. The methodology developed in this study for performing high-pressure Raman measurements can be applied to other nanodimensional layered materials. I Introduction Two-dimensional materials (2DMs) have emerged as an exciting field of research since the discovery of graphene Novoselov et al. 2005a . These materials have gained considerable interest for applications such as high-density storage and low-energy-consumption nanoelectronics due to their exceptional optical, mechanical, electrical and ferroelectric properties Mukherjee et al. 2020 ; Senapati and Maiti 2020 ; Dutta et al. 2021 , surpassing those of traditional ferroelectric materials. In their layered bulk form, 2DMs exhibit strong anisotropic properties due to the strong intralayer covalent bonding as opposed to the weak interlayer van der Waals (vdW) interactions. However, when thinned to monolayer or few-layer levels, their mechanical and electronic properties undergo dramatic changes. For instance, graphene demonstrates ultrahigh carrier mobility absent in graphite Novoselov et al. 2005b , while monolayer MoS 2 transitions from an indirect to a direct bandgap semiconductor Mak et al. 2010 . In the specific case of layered \alpha -In 2 Se 3 , a III-VI semiconductor, a distinct 3D \rightarrow 2D crossover was observed, highlighted by the emergence of quantum confinement effects Quereda et al. 2016 . Moreover, \alpha -In 2 Se 3 exhibits robust spontaneous intercoupled in-plane (IP) and out-of-plane (OOP) ferroelectricity in its monolayer form, arising from the lateral shift of the central Se layer Ding et al. 2017 . This unique property positions it as a potential candidate for ferroelectric memory and optoelectronic devices Ding et al. 2017 ; Mukherjee and Koren 2022 . While high-pressure studies have been conducted on layered materials like graphite Rao et al. 1997 and transition metal dichalcogenides (TMDs) Nayak et al. 2014 ; Chi et al. 2014 ; Ahmad et al. 2025 , these systems are often hundreds of layers thick which do not reach the true 2D limits. In contrast, investigations of few-layer 2DMs under pressure remain few, with only limited studies on materials like monolayer WS 2 /MoSe 2 Ma et al. 2021 . In general, pressure is expected to significantly affect the physicochemical properties of \alpha -In 2 Se 3 , as evident in other layered compounds Rao et al. 1997 ; Ahmad et al. 2025 under pressure. However, key questions, such as how does pressure affect few-layer \alpha -In 2 Se 3 in comparison to its bulk form, remain. Motivated by the above, in this study we examine the high-pressure structural behavior of a few-layer In 2 Se 3 specimen in comparison with the bulk form. For this reason, we performed high-pressure Raman spectroscopy study on a few-layer specimen and compare it with our recently published results for the bulk form Feng et al. 2025 . We conclude that while both states show similar structural evolution under pressure, the few-layer specimen intriguingly exhibits an abrupt \beta^{{}^{\prime}} to IV transition at 45 GPa, contrasting with the extended phase coexistence observed in the bulk samples. We tentatively attribute the origin of this observation to the different morphology between the two states, single-crystal-like vs powder for the few-layer and the bulk forms of In 2 Se 3 , respectively. These differences highlight how material morphology can influence the observed phase transitions under pressure. Finally, a novel methodology was developed for determining \alpha -In 2 Se 3 thickness by combining Raman measurements with Atomic Force microscope topographical data. II Materials and Methods II.1 Materials Commercially available, HQ graphene Company ( > 99.995 \% ), \alpha -In 2 Se 3 single-crystal (SC) specimens were used for the Raman spectroscopy measurements of this study. A polyvinyl chloride (PVC) surface protection tape (NITTO SPV224 type, manufactured by ProTapes & Specialties Company) was used for the physical exfoliation process. The few-layer specimens were mechanically exfoliated from the bulk SC using the PVC tape and transferred onto a standard 525 \mu m-thick silicon (Si) wafer. To enhance the deposition of large thin flakes, we employed a hot exfoliation technique: the tape with exfoliated crystals was attached on the Si substrate and heated at 120°C for 1 minute prior to separation. A custom substrate consisted of a 285±13 nm SiO 2 layer thermally grown on top of a 25±5 \mu m thick Si disc from Sibranch Microelectronics Company was used for the high-pressure experiments. The use of such a thin substrate necessitates from the need to be compatible with the 40-50 \mu m deep sample chambers used in high pressure experiments, see below. To prevent fracture during processing, the fragile Si wafer was mounted on a glass slide using weak adhesive labels (TANEXO) applied to both right and left sides of the wafer. This stabilization method significantly improved handling reliability while maintaining clean exfoliation surfaces. II.2 Atomic Force Microscopy The sample morphology was investigated using a Dimension Icon atomic force microscopy (AFM) from Bruker, equipped with a PPP-EFM Pt/Ir coated Si tip from Nanosensors. The spring constant of the tip was approximately 2.8 N/m (ranging from 0.5 to 9.5) and the radius was less than 7 nm. The measurements were conducted in a nitrogen-filled glovebox (with H 2 O and O 2 content of less than 1 ppm) using the tapping mode, where the set point and average speed were configured to 219.4 nm and 10 \mu m/s, respectively. II.3 Raman Spectroscopy Raman studies at ambient condition were measured using a WITec Alpha300R confocal micro-Raman spectrometer using a 532 nm laser for excitation with a 100× objective (NA = 0.9; \Delta\lambda\approx 360 nm, 1800 g/mm -1 grating) for laser focusing with a CCD camera (UHTS 300). The laser probing spot dimension was 0.36 \mu m. The power of the laser was kept around 1 mW to avoid undesirable sample heating and degradation. Raman studies under pressure were performed using a custom-made confocal micro-Raman with the 532 nm line of a solid-state laser for excitation in the backscattering geometry. The laser probing spot dimension was 4 \mu m. Raman spectra were recorded with a spectral resolution of 2 cm -1 using a single-stage spectrograph equipped with a CCD array detector. The laser power