Accurate prediction of optical transitions in epitaxial InGaAs/InAlAs asymmetric coupled quantum well structures

Konstantinos Pantzas, Virginie Trinité, Angela Vasanelli, Carlo Sirtori, Grégoire Beaudoin, Isabelle Sagnes, Jean-Luc Reverchon, Gilles Patriarche · 2025

Read Accurate prediction of optical transitions in epitaxial InGaAs/InAlAs asymmetric coupled quantum well structures by Konstantinos Pantzas, Virginie Trinité, Angela Vasanelli, Carlo Sirtori, Grégoire Beaudoin, Isabelle Sagnes, Jean-Luc Reverchon, Gilles Patriarche (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-19951.txt.

Introduction

Layered semiconductor wells steer infrared light for emitters and detectors, but design software must predict their absorption colors precisely. Konstantinos Pantzas and seven co-authors rebuild the model of one such structure from atomic-scale images. Z-contrast microscopy and strain maps reveal how the alloy grades across each interface. That graded profile replaces the usual square-well guess with nominal mixes.

Fed into absorption calculations, the honest profile lands within a few milli-electron-volts of the measured spectrum. The naive model missed by nearly ten times as much. Growth by vapor phase epitaxy blurs interfaces in ways designers ignore at their peril. Predictive accuracy at this level lets engineers design mid-infrared devices on screen before growing them. The method generalizes to other layered heterostructures.

Catalog record

CREATORKonstantinos Pantzas, Virginie Trinité, Angela Vasanelli, Carlo Sirtori, Grégoire Beaudoin, Isabelle Sagnes, Jean-Luc Reverchon, Gilles Patriarche
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-19951

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Accurate prediction of optical transitions in epitaxial InGaAs/InAlAs asymmetric coupled quantum well structures Konstantinos Pantzas, Virginie Trinité, Angela Vasanelli, Carlo Sirtori, Grégoire Beaudoin, Isabelle Sagnes, Jean-Luc Reverchon, Gilles Patriarche Abstract Résumé Atomically-resolved Z-contrast and strain mappings are used to extract a model of the composition of an InGaAs/InAlAs asymmetric coupled quantum-well structure grown on InP using metal-organic vapor phase epitaxy. The model accounts for grading across the multiple alloy interfaces. The model is used to compute intersubband absorption in the structure. The simulation accurately predicts the experimental absorption spectrum of the structure within only a few meV \mathrm{meV} , an almost ten-fold improvement over simulations using a square-band profile with nominal alloy compositions, and a significant step forward in accurate and predictive simulations of the optical properties epitaxial heterostructures for emission, modulation and detection in mid-infrared. I Introduction Optoelectronic devices operating in the mid-infrared domain are required for several applications, including night vision, free-space communications Martini et al. 2001 , light detection and ranging (LIDAR) Diaz et al. 2016 , spectroscopy Villares et al. 2014 , and observational astronomy Hale et al. 2000 . Unipolar quantum devices, i.e. quantum cascade lasers (QCLs), detectors (QCDs) and quantum-well infrared detectors (QWIPs), as well as interband cascade lasers (ICLs) offer unique possibilities for room-temperature and high-frequency operation. These devices are now all reaching a level of maturity sufficient for the development of mid-infrared optoelectronic systems, with recent examples include systems for free-space communication combining a QCL - modulated either directly or using an external modulator - and a high-frequency quantum-well detector Dely et al. 2022 ; Saemian et al. 2024 . Further development of such systems hinges on a better understanding and modeling of the complex heterostructures that underpin the individual devices. Indeed, devices based on semiconductor superlattices rely on designs involving several hundred wells and barriers, with some designs calling for layers only a fraction of an atomic monolayer and even minute deviations in the epitaxial structure induce large shifts of the operating wavelength. In this context, fine-tuning a given device design to improve overall system performance is a time consuming and laborious process involving numerous cycles of epitaxy, processing and characterization. One of the key issues is understanding, modeling, and controlling interfaces. In most semiconductor devices, individual layers in structures are sufficiently thick to consider interfaces ideally abrupt and model the potential in these crystals using square wells and barriers. Epitaxial interfaces, however, have a finite width, comparable or greater than the width of certain layers in the design of unipolar devices, and, as a result, greatly impact their performance. Developments in characterization techniques recently made it possible to measure the characteristic interface length of epitaxial interfaces Ashuach et al. 2013 ; Patil et al. 2017 ; Luna et al. 2012 ; Luna et al. 2009 ; Luna et al. 2008 ; Hulko et al. 2008 ; Prosa et al. 2011 ; Grange et al. 2020 ; Müller et al. 2012 ; Wang et al. 2017 . These works highlight the importance of investigating and more accurately modeling the microstructure of epitaxial crystals used in unipolar devices. Nevertheless, the models proposed in these works exhibit a few shortcomings. First, most studies have been limited to heterostructures where the characteristic length of interfaces is smaller than the width of the thinnest layers. Furthermore, the studies often consider interfaces where only one element is exchanged - e.g. Ge/SiGe Grange et al. 2020 or GaAs/AlGaAs Luna et al. 2012 . However, several key structures in unipolar devices rely on alloys where more than one elements are exchanged across interfaces. Finally, the case of multiple interfaces spaced closely together and the ensuing influence on grading is not handled. The present contribution aims to address these shortcomings. A generalized expression for compositional grading for arbitrary number of interfaces, spacings, and number of chemical elements in alloys is proposed. The use of the model is showcased in the design of asymmetric coupled quantum wells (ACQW) using (In,Al,Ga)As alloys lattice-matched on InP. The model is calibrated on experimental data obtained from quantified scanning transmission electron microscopy. It is then used in numerical simulations and shown to accurately predict the experimental absorption spectra of the ACQW structures. II Models and Methods Compositional grading at interfaces can be modeled with a variety of mathematical sigmoid functions. Two such functions have been used in the literature, the logistic function Luna et al. 2012 ; Luna et al. 2008 ; Luna et al. 2010 ; Luna et al. 2009 and the error function Grange et al. 2020 . Both functions were shown to yield a good agreement with experiment. The logistic function is, however, the simpler of the two and better suited to the generalization proposed here. Following Reference Luna et al. 2012 , in a crystal for which the composition of different layers varies across an interface at position z_{n} , the variation due to grading at an interface is modeled using : \theta_{n}\left(z\right)=1-\frac{1}{1+e^{\left(z-z_{n}\right)/L_{n}}}, (1) where L_{n} is the characteristic length of transition between the two layers of different compositions on either side of the interface at z_{n} . Now, consider a crystal consisting of N layers, ordered along direction z , and made of various alloys. Let M be the number of total elements in the crystal, and c_{m,n} the target composition far from any interface of alloy element m in layer n . The sum of the compositions over all alloy elements must obey : \sum_{m=0}^{M-1}c_{m,n}=1 (2) at every point in the crystal. Taking grading into account, the composition of element m , \mathcal{C}_{m}(z) , at each position z is given by : \mathcal{C}_{m}\left(z\right)=c_{m,0}+\sum_{n=0}^{N-1}\left(c_{m,n+1}-c_{m,n}\right)\theta_{n}\left(z\right), (3) i.e. the sum of contributions from all layers in the crystal, weighted by \theta_{n} that accounts for grading across interfaces. This expression meets the criteria set out above : it accounts for multiple layers, arbitrarily spaced and taking into account all elements in the structure. One can readily show that the sum over m of all \mathcal{C}_{m} also equals unity at all z in the crystal. The parameters in this expression - the positions of the interfaces z_{n} , the characteristic lengths L_{n} , and the compositions c_{m,n} - are determined by fitting the model to experimental data from scanning transmission electron microscopy. To calibrate the model, an ACQW structure was grown in a Veeco D180 Turbodisc MOVPE reactor (sample A). The structure consists of two InGaAs wells that are 5.6\text{\,}\mathrm{nm} and 2.5\text{\,}\mathrm{nm} thick, separated by a 1.4\text{\,}\mathrm{nm} thick InAlAs barrier. This core structure is surrounded by 25\text{\,}\mathrm{nm} thick InAlAs barriers. Trimethylgallium, trimethylaluminum, and trimethylindium were used as organometallic precursors to elementary gallium, aluminum, and indium, respectively, and arsine as a hydride precursor to elementary arsenic. All alloys are lattice-matched on InP. The thin InAlAs barrier was grown following the aluminum flow modulation scheme introduced in Reference Pantzas et al. 2016 to compensate for the partial loss of aluminum in very thin barriers. A lamella was prepared from sample A using ion milling and thinning, carried out in a FEI SCIOS dual-beam FIB-SEM. It was then observed in an aberration-corrected FEI TITAN 200 TEM-STEM operating at 200\text{\,}\mathrm{keV} . The convergence half-angle of the probe was 17.6\text{\,}\mathrm{mrad} and the detection inner and outer half-angles for

Read the complete text